Hello. I have a some weird situation with enabled channels name and pids update (vdr-1.3.37). channels.conf fragment: ********** K1;SPACECOM:10722:h:S4.0W:27500:257:258:0:0:1:4369:1:0 OTV;SPACECOM:10722:h:S4.0W:27500:513:514:0:0:2:4369:1:0 1PLUS1;SPACECOM:10722:h:S4.0W:27500:769:770,771:773:0:3:4369:1:0 TV KYIV;SPACECOM:10722:h:S4.0W:27500:1025:1026:0:0:4:4369:1:0 MEGASPORT;SPACECOM:10722:h:S4.0W:27500:1281:1282:0:2600:5:4369:1:0 K2;SPACECOM:10722:h:S4.0W:27500:1537:1538:0:0:6:4369:1:0 TEST;SPACECOM:10722:h:S4.0W:27500:1793:1794:0:0:7:4369:1:0
STB;SPACECOM:10762:h:S4.0W:23250:33:34:38:0:1:0:0:0 M1;SPACECOM:10762:h:S4.0W:23250:49:50,51:0:0:2:0:0:0 TONIS;SPACECOM:10762:h:S4.0W:23250:65:66:0:0:3:0:0:0 ICTV;SPACECOM:10762:h:S4.0W:23250:97:98,99:100:0:5:0:0:0 M1 Int;SPACECOM:10762:h:S4.0W:23250:113:114,115:0:2600:6:0:0:0 ********** For example when switch to channel STB, some channels above from other transponder change names as: K1 to STB OTV to M1 1PLUS1 to TONIS MEGASPORT to ICTV K2 to M1 Int If switch back for example to K1, all upper names restored and bottom changes vice versa.
I see, that name pairs have same SI, but other parameters are different. Switcing off name and pids update feature is not a good idea for other useful changes on other channels..
I hope my explanation is clear enough for understanding and any help is welcome.
Regards, SK
Hi,
On Thursday 08 December 2005 21:34, Suur Karu wrote:
For example when switch to channel STB, some channels above from other transponder change names as: K1 to STB OTV to M1 1PLUS1 to TONIS MEGASPORT to ICTV K2 to M1 Int If switch back for example to K1, all upper names restored and bottom changes vice versa.
I see, that name pairs have same SI, but other parameters are different. Switcing off name and pids update feature is not a good idea for other useful changes on other channels..
I hope my explanation is clear enough for understanding and any help is welcome.
man 5 vdr ... RID The Radio ID of this channel (typically 0, may be used to distinguish channels where NID, TID and SID are all equal). ....
Oleg
Oleg wrote:
Hi,
On Thursday 08 December 2005 21:34, Suur Karu wrote:
For example when switch to channel STB, some channels above from other transponder change names as: K1 to STB OTV to M1 1PLUS1 to TONIS MEGASPORT to ICTV K2 to M1 Int If switch back for example to K1, all upper names restored and bottom changes vice versa.
I see, that name pairs have same SI, but other parameters are different. Switcing off name and pids update feature is not a good idea for other useful changes on other channels..
I hope my explanation is clear enough for understanding and any help is welcome.
man 5 vdr ... RID The Radio ID of this channel (typically 0, may be used to distinguish channels where NID, TID and SID are all equal). ....
Oleg
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I have same porblem with vdr-1.3.37 When I choose names and pids option vdr change names of lots of channels. All of names are incoorect also like [13AD], [13FF] etc. I think it cannot parse pmt of transponder correctly.
Burak BAYER wrote:
Oleg wrote:
Hi,
On Thursday 08 December 2005 21:34, Suur Karu wrote:
For example when switch to channel STB, some channels above from other transponder change names as: K1 to STB OTV to M1 1PLUS1 to TONIS MEGASPORT to ICTV K2 to M1 Int If switch back for example to K1, all upper names restored and bottom changes vice versa.
I see, that name pairs have same SI, but other parameters are different. Switcing off name and pids update feature is not a good idea for other useful changes on other channels..
I hope my explanation is clear enough for understanding and any help is welcome.
man 5 vdr ... RID The Radio ID of this channel (typically 0, may be used to distinguish channels where NID, TID and SID are all equal). ....
Oleg
I have same porblem with vdr-1.3.37 When I choose names and pids option vdr change names of lots of channels. All of names are incoorect also like [13AD], [13FF] etc. I think it cannot parse pmt of transponder correctly.
Can you check whether it is actually VDR that can't parse the data, or whether the data is in any way flawed?
I'm afriad I can't receive S4.0W here, so I can't test this myself.
Klaus
Klaus Schmidinger wrote:
I have same porblem with vdr-1.3.37 When I choose names and pids option vdr change names of lots of channels. All of names are incoorect also like [13AD], [13FF] etc. I think it cannot parse pmt of transponder correctly.
Can you check whether it is actually VDR that can't parse the data, or whether the data is in any way flawed?
Is it right info You needed?
root@vdr:~/.scan# dvbscan -a0 -v Amos-4W scanning Amos-4W using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 10722000 H 27500000 3 initial transponder 10762000 H 23250000 3
tune to: 10722:h:0:27500
DiSEqC: switch pos 0, 18V, loband (index 1)
tuning status == 0x1f
PAT PMT 0x0600 for service 0x0006 PMT 0x0200 for service 0x0002 PMT 0x0700 for service 0x0007 PMT 0x0300 for service 0x0003 NIT (actual TS) Network Name 'KRRT' SDT (actual TS) 0x0000 0x0001: pmt_pid 0x0100 SPACECOM -- K1 (running) 0x0000 0x0002: pmt_pid 0x0200 SPACECOM -- OTV (running) 0x0000 0x0003: pmt_pid 0x0300 SPACECOM -- 1PLUS1 (running) 0x0000 0x0004: pmt_pid 0x0400 SPACECOM -- TV KYIV (running) 0x0000 0x0005: pmt_pid 0x0500 SPACECOM -- MEGASPORT (running, scrambled) 0x0000 0x0006: pmt_pid 0x0600 SPACECOM -- K2 (running) 0x0000 0x0007: pmt_pid 0x0700 SPACECOM -- TEST (running) PMT 0x0400 for service 0x0004 PMT 0x0500 for service 0x0005 PMT 0x0100 for service 0x0001
tune to: 10762:h:0:23250
DiSEqC: switch pos 0, 18V, loband (index 1)
tuning status == 0x1f
PAT NIT (actual TS) Network Name 'SCOPUS NET' PMT 0x0060 for service 0x0005 PMT 0x0040 for service 0x0003 PMT 0x0070 for service 0x0006 PMT 0x0020 for service 0x0001 PMT 0x0080 for service 0x0007 PMT 0x0030 for service 0x0002 SDT (actual TS) 0x0000 0x0001: pmt_pid 0x0020 SCOPUS PROVIDER -- KIEV STB (running) 0x0000 0x0002: pmt_pid 0x0030 SCOPUS PROVIDER -- M1 (running) 0x0000 0x0003: pmt_pid 0x0040 SCOPUS PROVIDER -- TONIS (running) 0x0000 0x0005: pmt_pid 0x0060 SCOPUS PROVIDER -- ICTV (running) 0x0000 0x0006: pmt_pid 0x0070 SCOPUS PROVIDER -- M1 INT-L TEST (running, scrambled) 0x0000 0x0007: pmt_pid 0x0080 SCOPUS PROVIDER -- TRK SVIT (running) dumping lists (13 services) K1:10722:h:0:27500:257:258:1 OTV:10722:h:0:27500:513:514:2 1PLUS1:10722:h:0:27500:769:770:3 TV KYIV:10722:h:0:27500:1025:1026:4 MEGASPORT:10722:h:0:27500:1281:1282:5 K2:10722:h:0:27500:1537:1538:6 TEST:10722:h:0:27500:1793:1794:7 KIEV STB:10762:h:0:23250:33:34:1 M1:10762:h:0:23250:49:50:2 TONIS:10762:h:0:23250:65:66:3 ICTV:10762:h:0:23250:97:98:5 M1 INT-L TEST:10762:h:0:23250:113:114:6 TRK SVIT:10762:h:0:23250:129:130:7 Done.
Regards, SK
Suur Karu wrote:
Klaus Schmidinger wrote:
I have same porblem with vdr-1.3.37 When I choose names and pids option vdr change names of lots of channels. All of names are incoorect also like [13AD], [13FF] etc. I think it cannot parse pmt of transponder correctly.
Can you check whether it is actually VDR that can't parse the data, or whether the data is in any way flawed?
Is it right info You needed?
root@vdr:~/.scan# dvbscan -a0 -v Amos-4W scanning Amos-4W using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 10722000 H 27500000 3 initial transponder 10762000 H 23250000 3
tune to: 10722:h:0:27500
DiSEqC: switch pos 0, 18V, loband (index 1)
tuning status == 0x1f
PAT PMT 0x0600 for service 0x0006 PMT 0x0200 for service 0x0002 PMT 0x0700 for service 0x0007 PMT 0x0300 for service 0x0003 NIT (actual TS) Network Name 'KRRT' SDT (actual TS) 0x0000 0x0001: pmt_pid 0x0100 SPACECOM -- K1 (running) 0x0000 0x0002: pmt_pid 0x0200 SPACECOM -- OTV (running) 0x0000 0x0003: pmt_pid 0x0300 SPACECOM -- 1PLUS1 (running) 0x0000 0x0004: pmt_pid 0x0400 SPACECOM -- TV KYIV (running) 0x0000 0x0005: pmt_pid 0x0500 SPACECOM -- MEGASPORT (running, scrambled) 0x0000 0x0006: pmt_pid 0x0600 SPACECOM -- K2 (running) 0x0000 0x0007: pmt_pid 0x0700 SPACECOM -- TEST (running) PMT 0x0400 for service 0x0004 PMT 0x0500 for service 0x0005 PMT 0x0100 for service 0x0001
tune to: 10762:h:0:23250
DiSEqC: switch pos 0, 18V, loband (index 1)
tuning status == 0x1f
PAT NIT (actual TS) Network Name 'SCOPUS NET' PMT 0x0060 for service 0x0005 PMT 0x0040 for service 0x0003 PMT 0x0070 for service 0x0006 PMT 0x0020 for service 0x0001 PMT 0x0080 for service 0x0007 PMT 0x0030 for service 0x0002 SDT (actual TS) 0x0000 0x0001: pmt_pid 0x0020 SCOPUS PROVIDER -- KIEV STB (running) 0x0000 0x0002: pmt_pid 0x0030 SCOPUS PROVIDER -- M1 (running) 0x0000 0x0003: pmt_pid 0x0040 SCOPUS PROVIDER -- TONIS (running) 0x0000 0x0005: pmt_pid 0x0060 SCOPUS PROVIDER -- ICTV (running) 0x0000 0x0006: pmt_pid 0x0070 SCOPUS PROVIDER -- M1 INT-L TEST (running, scrambled) 0x0000 0x0007: pmt_pid 0x0080 SCOPUS PROVIDER -- TRK SVIT (running) dumping lists (13 services) K1:10722:h:0:27500:257:258:1 OTV:10722:h:0:27500:513:514:2 1PLUS1:10722:h:0:27500:769:770:3 TV KYIV:10722:h:0:27500:1025:1026:4 MEGASPORT:10722:h:0:27500:1281:1282:5 K2:10722:h:0:27500:1537:1538:6 TEST:10722:h:0:27500:1793:1794:7 KIEV STB:10762:h:0:23250:33:34:1 M1:10762:h:0:23250:49:50:2 TONIS:10762:h:0:23250:65:66:3 ICTV:10762:h:0:23250:97:98:5 M1 INT-L TEST:10762:h:0:23250:113:114:6 TRK SVIT:10762:h:0:23250:129:130:7 Done.
Regards, SK
Looks good to me.
Please replace the function cChannels::GetByChannelID() in channels.c with the attached code, then run VDR and switch from transponder 10722 to 10762 and post what gets printed to stdout.
Klaus
Klaus Schmidinger wrote:
Please replace the function cChannels::GetByChannelID() in channels.c with the attached code, then run VDR and switch from transponder 10722 to 10762 and post what gets printed to stdout.
Here we are.
From 10722 to 10762: --------------------------------------- GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 GetByChannelID: S4.0W-0-110762-1 0 0 sid = 1 GetByChannelID: S4.0W-4369-1-2 0 0 sid = 2 GetByChannelID: S4.0W-0-110762-2 0 0 sid = 2 GetByChannelID: S4.0W-4369-1-3 0 0 sid = 3 GetByChannelID: S4.0W-0-110762-3 0 0 sid = 3 GetByChannelID: S4.0W-4369-1-5 0 0 sid = 5 GetByChannelID: S4.0W-0-110762-5 0 0 sid = 5 GetByChannelID: S4.0W-4369-1-6 0 0 sid = 6 GetByChannelID: S4.0W-0-110762-6 0 0 sid = 6 GetByChannelID: S4.0W-4369-1-7 0 0 sid = 7 GetByChannelID: S4.0W-0-110762-7 0 0 sid = 7 ---------------------------------------
From 10762 to 10722: ---------------------------------------
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 GetByChannelID: S4.0W-0-110722-1 0 0 sid = 1 GetByChannelID: S4.0W-4369-1-2 0 0 sid = 2 GetByChannelID: S4.0W-0-110722-2 0 0 sid = 2 GetByChannelID: S4.0W-4369-1-3 0 0 sid = 3 GetByChannelID: S4.0W-0-110722-3 0 0 sid = 3 GetByChannelID: S4.0W-4369-1-4 0 0 sid = 4 GetByChannelID: S4.0W-0-110722-4 0 0 sid = 4 GetByChannelID: S4.0W-4369-1-5 0 0 sid = 5 GetByChannelID: S4.0W-0-110722-5 0 0 sid = 5 GetByChannelID: S4.0W-4369-1-6 0 0 sid = 6 GetByChannelID: S4.0W-0-110722-6 0 0 sid = 6 GetByChannelID: S4.0W-4369-1-7 0 0 sid = 7 GetByChannelID: S4.0W-0-110722-7 0 0 sid = 7 ---------------------------------------
Regards, SK
Suur Karu wrote:
Klaus Schmidinger wrote:
Please replace the function cChannels::GetByChannelID() in channels.c with the attached code, then run VDR and switch from transponder 10722 to 10762 and post what gets printed to stdout.
Here we are.
From 10722 to 10762:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 GetByChannelID: S4.0W-0-110762-1 0 0 sid = 1 GetByChannelID: S4.0W-4369-1-2 0 0 sid = 2 GetByChannelID: S4.0W-0-110762-2 0 0 sid = 2 GetByChannelID: S4.0W-4369-1-3 0 0 sid = 3 GetByChannelID: S4.0W-0-110762-3 0 0 sid = 3 GetByChannelID: S4.0W-4369-1-5 0 0 sid = 5 GetByChannelID: S4.0W-0-110762-5 0 0 sid = 5 GetByChannelID: S4.0W-4369-1-6 0 0 sid = 6 GetByChannelID: S4.0W-0-110762-6 0 0 sid = 6 GetByChannelID: S4.0W-4369-1-7 0 0 sid = 7 GetByChannelID: S4.0W-0-110762-7 0 0 sid = 7
Sorry, I forgot set RID back to zero. With default value of it I got different result: -------------------- GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 channel->Sid() = 1 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-1 GetByChannelID: S4.0W-4369-1-2 0 0 sid = 2 channel->Sid() = 2 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-2 GetByChannelID: S4.0W-4369-1-3 0 0 sid = 3 channel->Sid() = 3 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-3 GetByChannelID: S4.0W-4369-1-5 0 0 sid = 5 channel->Sid() = 5 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-5 GetByChannelID: S4.0W-4369-1-6 0 0 sid = 6 channel->Sid() = 6 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-6 GetByChannelID: S4.0W-4369-1-7 0 0 sid = 7 channel->Sid() = 7 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-7 -------------------- It seems like no differents 10722->10762 or 10762->10722 switching.
Night, SK
Suur Karu wrote:
Suur Karu wrote:
Klaus Schmidinger wrote:
Please replace the function cChannels::GetByChannelID() in channels.c with the attached code, then run VDR and switch from transponder 10722 to 10762 and post what gets printed to stdout.
Here we are.
From 10722 to 10762:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 GetByChannelID: S4.0W-0-110762-1 0 0 sid = 1 GetByChannelID: S4.0W-4369-1-2 0 0 sid = 2 GetByChannelID: S4.0W-0-110762-2 0 0 sid = 2 GetByChannelID: S4.0W-4369-1-3 0 0 sid = 3 GetByChannelID: S4.0W-0-110762-3 0 0 sid = 3 GetByChannelID: S4.0W-4369-1-5 0 0 sid = 5 GetByChannelID: S4.0W-0-110762-5 0 0 sid = 5 GetByChannelID: S4.0W-4369-1-6 0 0 sid = 6 GetByChannelID: S4.0W-0-110762-6 0 0 sid = 6 GetByChannelID: S4.0W-4369-1-7 0 0 sid = 7 GetByChannelID: S4.0W-0-110762-7 0 0 sid = 7
Sorry, I forgot set RID back to zero. With default value of it I got different result:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 channel->Sid() = 1 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-1 GetByChannelID: S4.0W-4369-1-2 0 0 sid = 2 channel->Sid() = 2 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-2 GetByChannelID: S4.0W-4369-1-3 0 0 sid = 3 channel->Sid() = 3 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-3 GetByChannelID: S4.0W-4369-1-5 0 0 sid = 5 channel->Sid() = 5 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-5 GetByChannelID: S4.0W-4369-1-6 0 0 sid = 6 channel->Sid() = 6 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-6 GetByChannelID: S4.0W-4369-1-7 0 0 sid = 7 channel->Sid() = 7 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-7
It seems like no differents 10722->10762 or 10762->10722 switching.
Well, I cant see anything wrong here. VDR always finds exactly the channel it is looking for.
Please let me know if you get some output here that shows different values in the "GetByChannelID:" and "channel->GetChannelID()" lines.
Klaus
Thank you for response.
I think I see problem.
RID set manually to not zero (and channels names not messed up):
From 10722 to 10762:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 GetByChannelID: S4.0W-0-110762-1 0 0 sid = 1
Same case (10722->10762) with RID=0:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 channel->Sid() = 1 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-1
Transponder value is wrong. It must be 110762. Or isn't? And in first entry each channels printed out 2 times (with and without transponder frequency). With RID=0 second printouts are skipped. Sorry, I have only wery basic knowledge of C and can't understand most of complex sources.
Regards, SK
Suur Karu wrote:
Thank you for response.
I think I see problem.
RID set manually to not zero (and channels names not messed up):
From 10722 to 10762:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 GetByChannelID: S4.0W-0-110762-1 0 0 sid = 1
Same case (10722->10762) with RID=0:
GetByChannelID: S4.0W-4369-1-1 0 0 sid = 1 channel->Sid() = 1 channel->Nid() = 4369 channel->Tid() = 1 channel->Transponder() = 110722 channel->GetChannelID() = S4.0W-4369-1-1
Transponder value is wrong. It must be 110762. Or isn't?
Well, the incoming channel id is S4.0W-4369-1-1, and according to your initial channels.conf excerpt
K1;SPACECOM:10722:h:S4.0W:27500:257:258:0:0:1:4369:1:0
that channel is on transponder 10722. The line
channel->Transponder() = 110722
in the above output indicates that the channel that is returned from the cChannels::GetByChannelID() call is on transponder 10722 (the first '1' represents the polarization).
So I'm afraid I can't see anything wrong.
Klaus
-
Burak BAYER -
Klaus Schmidinger -
Oleg -
Suur Karu