VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING: ========
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one). - Fixed bonding more than two devices. - Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by Sundararaj Reel). - Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many link levels (reported by Sundararaj Reel). - Removed redundant memset() in the ctor of cSatCableNumbers (triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong). - Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä). - Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added support for HbbTV to libsi (thanks to Christoph Haubrich). - Added support for devices with more than one delivery system per frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend. - Updated the Hungarian language texts (thanks to István Füley). - cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands at any given time (reported by Frank Neumann). - cEvent::FixEpgBugs() now replaces any newline characters in stream component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012). - Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg). - Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj Reel). - Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg). - Added support for handling DVB-T2 transponders. This requires a DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg). - Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä). - Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken TS packets, e.g. when switching channels. - Fixed the SVDRP command CLRE for a single channel in case there are events that have a timer (thanks to Timo Eskola). - BIDI support now checks at runtime whether the system runs with UTF-8 (suggested by Torsten Lang). - Added member functions Adapter() and Frontend() to cDvbDevice (suggested by Rolf Ahrenberg). - The parameters that are only used by "second generation" delivery systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T). - Changed IndexToHMSF() so that it can handle negative Index values. - Added option -N to the msgmerge call in the Makefile, because fuzzy translation mostly resulted in useless strings. - The new setup option "Replay/Show remaining time" can be used to switch between showing the total length or the remaining time of the recording that is currently replayed. - Fixed wrongfully displaying the length of a recording in the title of the replay progress display. - Fixed frozen live view with device bonding in case the bonded master is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday. DVB-S channels work fine. However, any attempt to select a DVB-T channel results in "channel not available". The Syslog trace during VDR initialisation follows:
Jan 17 18:44:05 Nutrigrain vdr: [2587] video directory scanner thread started (pid=2586, tid=2587) Jan 17 18:44:05 Nutrigrain vdr: [2588] video directory scanner thread started (pid=2586, tid=2588) Jan 17 18:44:05 Nutrigrain vdr: [2586] reading EPG data from /home/digitalTV/video/epg.data Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'A - ATSC' Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'C - DVB-C' Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'S - DVB-S' Jan 17 18:44:05 Nutrigrain vdr: [2586] registered source parameters for 'T - DVB-T' Jan 17 18:44:05 Nutrigrain vdr: [2586] probing /dev/dvb/adapter0/frontend0 Jan 17 18:44:05 Nutrigrain vdr: [2586] new device number 1 Jan 17 18:44:05 Nutrigrain kernel: [ 150.671847] dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0 Jan 17 18:44:05 Nutrigrain vdr: [2586] frontend 0/0 provides DVB-S with QPSK ("ST STV0299 DVB-S") Jan 17 18:44:05 Nutrigrain vdr: [2591] section handler thread started (pid=2586, tid=2591) Jan 17 18:44:05 Nutrigrain vdr: [2590] tuner on frontend 0/0 thread started (pid=2586, tid=2590) Jan 17 18:44:05 Nutrigrain vdr: [2586] probing /dev/dvb/adapter1/frontend0 Jan 17 18:44:05 Nutrigrain vdr: [2586] new device number 2 Jan 17 18:44:06 Nutrigrain vdr: [2588] video directory scanner thread ended (pid=2586, tid=2588) Jan 17 18:44:06 Nutrigrain vdr: [2587] video directory scanner thread ended (pid=2586, tid=2587) Jan 17 18:44:10 Nutrigrain kernel: [ 155.838763] dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 0 Jan 17 18:44:10 Nutrigrain vdr: [2586] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118") Jan 17 18:44:10 Nutrigrain vdr: [2594] tuner on frontend 1/0 thread started (pid=2586, tid=2594) Jan 17 18:44:10 Nutrigrain vdr: [2595] section handler thread started (pid=2586, tid=2595) Jan 17 18:44:15 Nutrigrain vdr: [2586] ERROR (dvbdevice.c,1051): /dev/dvb/adapter1/frontend1: Device or resource busy Jan 17 18:44:15 Nutrigrain vdr: [2586] found 2 DVB devices
Note that there is also a DVB-S premium card in the mix which works OK.
It looks like VDR is not picking up the second frontend on the hybrid card as a result of the 'Device or resource busy' result which is due to frontend 0 being open on it.
Any suggestions:
Regards,
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Klaus Schmidinger Sent: Monday, 16 January 2012 2:11 AM To: vdr@linuxtv.org Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING: ========
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that one). - Fixed bonding more than two devices. - Fixed handling symbolic links in cRecordings::ScanVideoDir() (reported by Sundararaj Reel). - Fixed a memory leak in cRecordings::ScanVideoDir() in case there are too many link levels (reported by Sundararaj Reel). - Removed redundant memset() in the ctor of cSatCableNumbers (triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong). - Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks to Ville Skyttä). - Added HasSnr to the DEBUG_SIGNALQUALITY output in cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Added support for HbbTV to libsi (thanks to Christoph Haubrich). - Added support for devices with more than one delivery system per frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend. - Updated the Hungarian language texts (thanks to István Füley). - cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR commands at any given time (reported by Frank Neumann). - cEvent::FixEpgBugs() now replaces any newline characters in stream component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012). - Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf Ahrenberg). - Fixed cListBase::Move() in case From and To are equal (reported by Sundararaj Reel). - Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg). - Added support for handling DVB-T2 transponders. This requires a DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg). - Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville Skyttä). - Fixed a possible memory corruption in cTsToPes::GetPes() in case of broken TS packets, e.g. when switching channels. - Fixed the SVDRP command CLRE for a single channel in case there are events that have a timer (thanks to Timo Eskola). - BIDI support now checks at runtime whether the system runs with UTF-8 (suggested by Torsten Lang). - Added member functions Adapter() and Frontend() to cDvbDevice (suggested by Rolf Ahrenberg). - The parameters that are only used by "second generation" delivery systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T). - Changed IndexToHMSF() so that it can handle negative Index values. - Added option -N to the msgmerge call in the Makefile, because fuzzy translation mostly resulted in useless strings. - The new setup option "Replay/Show remaining time" can be used to switch between showing the total length or the remaining time of the recording that is currently replayed. - Fixed wrongfully displaying the length of a recording in the title of the replay progress display. - Fixed frozen live view with device bonding in case the bonded master is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On Wed, 18 Jan 2012 09:58:16 +1100 "Hawes, Mark" MARK.HAWES@au.fujitsu.com wrote:
Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday. DVB-S channels work fine. However, any attempt to select a DVB-T channel results in "channel not available". The Syslog trace during VDR initialisation follows:
It looks like VDR is not picking up the second frontend on the hybrid card as a result of the 'Device or resource busy' result which is due to frontend 0 being open on it.
If you are using new dvb driver you should only have 1 frontend which has all of the delivery systems. The DVBv3 message also looks suspicious.
Can you double check that new drivers are loaded and you have indeed only 1 frontend for that card ? (Not saying that there is not a bug)
Regards,
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Klaus Schmidinger Sent: Monday, 16 January 2012 2:11 AM To: vdr@linuxtv.org Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diffMD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that
one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir()
(reported by Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there
are too many link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers
(triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks
to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per
frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR
commands at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream
component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by
Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a
DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville
Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of
broken TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are
events that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with
UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice
(suggested by Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery
systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy
translation mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to
switch between showing the total length or the remaining time of the recording that is currently replayed.
- Fixed wrongfully displaying the length of a recording in the title
of the replay progress display.
- Fixed frozen live view with device bonding in case the bonded
master is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi, The drivers I am using I downloaded from the media build tree using "git clone git://linuxtv.org/media_build.git" as suggested on the Linuxtv.org site. However, these appear to be 'old' drivers as I am still getting 2 frontend devices created for my card when I load them. Can anyone suggest how I can get the latest set of Manu Abraham's drivers which I believe may contain some later patches. Thanks, Mark.
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Steffen Barszus Sent: Wednesday, 18 January 2012 5:47 PM To: vdr@linuxtv.org Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23
On Wed, 18 Jan 2012 09:58:16 +1100 "Hawes, Mark" MARK.HAWES@au.fujitsu.com wrote:
Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday. DVB-S channels work fine. However, any attempt to select a DVB-T channel results in "channel not available". The Syslog trace during VDR initialisation follows:
It looks like VDR is not picking up the second frontend on the hybrid card as a result of the 'Device or resource busy' result which is due to frontend 0 being open on it.
If you are using new dvb driver you should only have 1 frontend which has all of the delivery systems. The DVBv3 message also looks suspicious.
Can you double check that new drivers are loaded and you have indeed only 1 frontend for that card ? (Not saying that there is not a bug)
Regards,
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Klaus Schmidinger Sent: Monday, 16 January 2012 2:11 AM To: vdr@linuxtv.org Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diffMD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that
one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir()
(reported by Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are
too many link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers
(triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks
to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per
frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR
commands at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream
component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by
Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB
driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville
Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of
broken TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are
events that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with
UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice
(suggested by Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery
systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy
translation mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to
switch between showing the total length or the remaining time of the recording that is currently replayed.
- Fixed wrongfully displaying the length of a recording in the title
of the replay progress display.
- Fixed frozen live view with device bonding in case the bonded master
is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
I have updated my current build taken from the Media Build Tree last Tuesday with the contents of the linux media tarball dated 22/01/2012 and rebuilt my drivers. I still get the same results. As the system initialises the following lines appear in the syslog: Jan 23 12:16:44 Nutrigrain kernel: [ 9.338720] tuner-simple 16-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead Jan 23 12:16:44 Nutrigrain kernel: [ 9.346240] DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)... Jan 23 12:16:44 Nutrigrain kernel: [ 9.349110] DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)... Subsequently when starting VDR the following is logged: Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'A - ATSC' Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'C - DVB-C' Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'S - DVB-S' Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'T - DVB-T' Jan 23 13:10:13 Nutrigrain vdr: [2704] probing /dev/dvb/adapter0/frontend0 Jan 23 13:10:13 Nutrigrain vdr: [2704] new device number 1 Jan 23 13:10:13 Nutrigrain vdr: [2704] frontend 0/0 provides DVB-S with QPSK ("ST STV0299 DVB-S") Jan 23 13:10:13 Nutrigrain vdr: [2708] tuner on frontend 0/0 thread started (pid=2704, tid=2708) Jan 23 13:10:13 Nutrigrain vdr: [2709] section handler thread started (pid=2704, tid=2709) Jan 23 13:10:13 Nutrigrain vdr: [2704] probing /dev/dvb/adapter1/frontend0 Jan 23 13:10:13 Nutrigrain vdr: [2704] new device number 2 Jan 23 13:10:14 Nutrigrain vdr: [2706] video directory scanner thread ended (pid=2704, tid=2706) Jan 23 13:10:14 Nutrigrain vdr: [2705] video directory scanner thread ended (pid=2704, tid=2705) Jan 23 13:10:19 Nutrigrain vdr: [2704] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118") Jan 23 13:10:19 Nutrigrain vdr: [2712] tuner on frontend 1/0 thread started (pid=2704, tid=2712) Jan 23 13:10:19 Nutrigrain vdr: [2713] section handler thread started (pid=2704, tid=2713) Jan 23 13:10:24 Nutrigrain vdr: [2704] ERROR (dvbdevice.c,1087): /dev/dvb/adapter1/frontend1: Device or resource busy Jan 23 13:10:24 Nutrigrain vdr: [2704] found 2 DVB devices I'm sure that I have the latest drivers loaded now, but still the same issue. The only conclusion that I can come to is that the necessary changes to the drivers have not (yet) been made. Has anyone else tried VDR 1.7.23 with a HVR 4000 hybrid card and if so, do you get the same results? Thanks,
Mark.
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Steffen Barszus Sent: Wednesday, 18 January 2012 5:47 PM To: vdr@linuxtv.org Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23
On Wed, 18 Jan 2012 09:58:16 +1100 "Hawes, Mark" MARK.HAWES@au.fujitsu.com wrote:
Hi,
I have tried using my hybrid HVR 4000 card ( DVB-S2 and DVB-T frontends on one adapter ) against 1.7.23 and a new set of V4L-DVB drivers built on Monday. DVB-S channels work fine. However, any attempt to select a DVB-T channel results in "channel not available". The Syslog trace during VDR initialisation follows:
It looks like VDR is not picking up the second frontend on the hybrid card as a result of the 'Device or resource busy' result which is due to frontend 0 being open on it.
If you are using new dvb driver you should only have 1 frontend which has all of the delivery systems. The DVBv3 message also looks suspicious.
Can you double check that new drivers are loaded and you have indeed only 1 frontend for that card ? (Not saying that there is not a bug)
Regards,
-----Original Message----- From: vdr-bounces@linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf Of Klaus Schmidinger Sent: Monday, 16 January 2012 2:11 AM To: vdr@linuxtv.org Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23
VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diffMD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I missed that
one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in cRecordings::ScanVideoDir()
(reported by Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in case there are
too many link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of cSatCableNumbers
(triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in cDvbSpuDecoder::setTime() (thanks
to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph Haubrich).
- Added support for devices with more than one delivery system per
frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to István Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner sends SCR
commands at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters in stream
component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal (reported by
Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf Ahrenberg).
- Added support for handling DVB-T2 transponders. This requires a DVB
driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to Ville
Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes() in case of
broken TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case there are
events that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system runs with
UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend() to cDvbDevice
(suggested by Rolf Ahrenberg).
- The parameters that are only used by "second generation" delivery
systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative Index values.
- Added option -N to the msgmerge call in the Makefile, because fuzzy
translation mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be used to
switch between showing the total length or the remaining time of the recording that is currently replayed.
- Fixed wrongfully displaying the length of a recording in the title
of the replay progress display.
- Fixed frozen live view with device bonding in case the bonded master
is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
Am 23.01.2012 05:43, schrieb Hawes, Mark:
I have updated my current build taken from the Media Build Tree last Tuesday with the contents of the linux media tarball dated 22/01/2012 and rebuilt my drivers. I still get the same results. As the system initialises the following lines appear in the syslog: Jan 23 12:16:44 Nutrigrain kernel: [ 9.338720] tuner-simple 16-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead Jan 23 12:16:44 Nutrigrain kernel: [ 9.346240] DVB: registering adapter 1 frontend 0 (Conexant CX24116/CX24118)... Jan 23 12:16:44 Nutrigrain kernel: [ 9.349110] DVB: registering adapter 1 frontend 1 (Conexant CX22702 DVB-T)... Subsequently when starting VDR the following is logged: Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'A - ATSC' Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'C - DVB-C' Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'S - DVB-S' Jan 23 13:10:13 Nutrigrain vdr: [2704] registered source parameters for 'T - DVB-T' Jan 23 13:10:13 Nutrigrain vdr: [2704] probing /dev/dvb/adapter0/frontend0 Jan 23 13:10:13 Nutrigrain vdr: [2704] new device number 1 Jan 23 13:10:13 Nutrigrain vdr: [2704] frontend 0/0 provides DVB-S with QPSK ("ST STV0299 DVB-S") Jan 23 13:10:13 Nutrigrain vdr: [2708] tuner on frontend 0/0 thread started (pid=2704, tid=2708) Jan 23 13:10:13 Nutrigrain vdr: [2709] section handler thread started (pid=2704, tid=2709) Jan 23 13:10:13 Nutrigrain vdr: [2704] probing /dev/dvb/adapter1/frontend0 Jan 23 13:10:13 Nutrigrain vdr: [2704] new device number 2 Jan 23 13:10:14 Nutrigrain vdr: [2706] video directory scanner thread ended (pid=2704, tid=2706) Jan 23 13:10:14 Nutrigrain vdr: [2705] video directory scanner thread ended (pid=2704, tid=2705) Jan 23 13:10:19 Nutrigrain vdr: [2704] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("Conexant CX24116/CX24118") Jan 23 13:10:19 Nutrigrain vdr: [2712] tuner on frontend 1/0 thread started (pid=2704, tid=2712) Jan 23 13:10:19 Nutrigrain vdr: [2713] section handler thread started (pid=2704, tid=2713) Jan 23 13:10:24 Nutrigrain vdr: [2704] ERROR (dvbdevice.c,1087): /dev/dvb/adapter1/frontend1: Device or resource busy Jan 23 13:10:24 Nutrigrain vdr: [2704] found 2 DVB devices I'm sure that I have the latest drivers loaded now, but still the same issue. The only conclusion that I can come to is that the necessary changes to the drivers have not (yet) been made. Has anyone else tried VDR 1.7.23 with a HVR 4000 hybrid card and if so, do you get the same results?
Yes, I would get to the same conclusion. There should only be one frontend. You should point the guys on the linux-media mailing list to this "bug".
Lars.
Hi, The media_build repo contains only backported drivers. Are you sure that the new api changes were backported?
The mainstream development happens in media_tree only, which contains a complete kernel snapshot. HTH. Halim
On Mon, Jan 23, 2012 at 9:46 AM, Halim Sahin halim.sahin@t-online.de wrote:
Hi, The media_build repo contains only backported drivers. Are you sure that the new api changes were backported?
The media_build repo is a daily snapshot of what you'd get with media_tree (minus the kernel source itself).
Hi I have updated my DVB drivers using: git clone git://linuxtv.org/media_build.git cd media_build ./build make install
Yet VDR complains of the wrong DVB API version number: dvbdevice.h:18:2: error: #error VDR requires Linux DVB driver API version 5.3 or higher!
/usr/include/linux/dvb/version.h reports version 5.2 and the date of the file is old, meaning it was not updated when the drivers were updated.
Can anybody explain what has gone wrong here? Thanks
--- On Sun, 15/1/12, Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
From: Klaus Schmidinger Klaus.Schmidinger@tvdr.de Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23 To: vdr@linuxtv.org Date: Sunday, 15 January, 2012, 15:10 VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I
missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in
cRecordings::ScanVideoDir() (reported by Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in
case there are too many link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of
cSatCableNumbers (triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in
cDvbSpuDecoder::setTime() (thanks to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf
Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph
Haubrich).
- Added support for devices with more than one delivery
system per frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to István
Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner
sends SCR commands at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters
in stream component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal
(reported by Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf
Ahrenberg).
- Added support for handling DVB-T2 transponders.
This requires a DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to
Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes()
in case of broken TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case
there are events that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system
runs with UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend() to
cDvbDevice (suggested by Rolf Ahrenberg).
- The parameters that are only used by "second generation"
delivery systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative
Index values.
- Added option -N to the msgmerge call in the Makefile,
because fuzzy translation mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be
used to switch between showing the total length or the remaining time of the recording that is currently replayed.
- Fixed wrongfully displaying the length of a recording in
the title of the replay progress display.
- Fixed frozen live view with device bonding in case the
bonded master is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Hi,
Something to try:
*Short answer*
Make sure VDR Make.config points to the appropriate media_build directory (DVBDIR variable)
*Longer answer*
I'm not sure a simple 'install' of the DVB drivers changes any system headers. So VDR needs to point the headers relevant to the available modules.
1. Ensure you really have built and installed the media_build DVB stack.
2. Point VDR Make.config to your git media_build directory NOTE '/linux' suffix:
...
# From my vdr Make.config: #DVBDIR = /usr/local/src/v4l-dvb/current/linux #DVBDIR = /usr/local/src/linux-tbs-drivers/current/linux DVBDIR = /usr/local/src/linux-tbs-drivers/testing/linux
# Change to where you have downloaded and built your DVB stuff DVBDIR = /usr/local/src/dvb/media_build-git/linux
...
3. make VDR and install
If you have followed these steps already then I'm sorry not to add anything new.
Regards,
Ian.
On 22 Jan 2012, at 11:03, Stuart Morris wrote:
Hi I have updated my DVB drivers using: git clone git://linuxtv.org/media_build.git cd media_build ./build make install
Yet VDR complains of the wrong DVB API version number: dvbdevice.h:18:2: error: #error VDR requires Linux DVB driver API version 5.3 or higher!
/usr/include/linux/dvb/version.h reports version 5.2 and the date of the file is old, meaning it was not updated when the drivers were updated.
Can anybody explain what has gone wrong here? Thanks
--- On Sun, 15/1/12, Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
From: Klaus Schmidinger Klaus.Schmidinger@tvdr.de Subject: [vdr] [ANNOUNCE] VDR developer version 1.7.23 To: vdr@linuxtv.org Date: Sunday, 15 January, 2012, 15:10 VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2A 'diff' against the previous version is available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diffMD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11 vdr-1.7.23.tar.bz2 2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use it in my productive environment. I strongly recommend that you only use it under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl (sorry, I
missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in
cRecordings::ScanVideoDir() (reported by Sundararaj Reel).
- Fixed a memory leak in cRecordings::ScanVideoDir() in
case there are too many link levels (reported by Sundararaj Reel).
- Removed redundant memset() in the ctor of
cSatCableNumbers (triggered by Ville Skyttä pointing out that the argument sequence in the call was wrong).
- Removed a redundant NULL check in
cDvbSpuDecoder::setTime() (thanks to Ville Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä pointing out that the variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf
Ahrenberg).
- Added support for HbbTV to libsi (thanks to Christoph
Haubrich).
- Added support for devices with more than one delivery
system per frontend. This requires a DVB driver with version 5.5 or higher that can handle the DTV_ENUM_DELSYS call. With older drivers it will fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to István
Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only one tuner
sends SCR commands at any given time (reported by Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline characters
in stream component descriptions with blanks (thanks to Torsten Lang for reporting a problem with EPG data from BSkyB's "MTV MUSIC", S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData() (thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are equal
(reported by Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to Rolf
Ahrenberg).
- Added support for handling DVB-T2 transponders.
This requires a DVB driver with version 5.3 or higher that can handle the DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0 (thanks to
Ville Skyttä).
- Fixed a possible memory corruption in cTsToPes::GetPes()
in case of broken TS packets, e.g. when switching channels.
- Fixed the SVDRP command CLRE for a single channel in case
there are events that have a timer (thanks to Timo Eskola).
- BIDI support now checks at runtime whether the system
runs with UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend() to
cDvbDevice (suggested by Rolf Ahrenberg).
- The parameters that are only used by "second generation"
delivery systems (DVB-S2 and DVB-T2) are no longer written into channels.conf for "first generation" delivery systems (DVB-S and DVB-T).
- Changed IndexToHMSF() so that it can handle negative
Index values.
- Added option -N to the msgmerge call in the Makefile,
because fuzzy translation mostly resulted in useless strings.
- The new setup option "Replay/Show remaining time" can be
used to switch between showing the total length or the remaining time of the recording that is currently replayed.
- Fixed wrongfully displaying the length of a recording in
the title of the replay progress display.
- Fixed frozen live view with device bonding in case the
bonded master is used for live viewing (reported by Uwe Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Thanks I pointed Make.config to the media_build/linux directory and built that way. I'm surprised because I fully expected the media_build script to install the headers to.
--- On Sun, 22/1/12, Ian Bates ian_and_joanna@talktalk.net wrote:
From: Ian Bates ian_and_joanna@talktalk.net Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23 To: "VDR Mailing List" vdr@linuxtv.org Date: Sunday, 22 January, 2012, 12:40 Hi,
Something to try:
*Short answer*
Make sure VDR Make.config points to the appropriate media_build directory (DVBDIR variable)
*Longer answer*
I'm not sure a simple 'install' of the DVB drivers changes any system headers. So VDR needs to point the headers relevant to the available modules.
- Ensure you really have built and installed the
media_build DVB stack.
- Point VDR Make.config to your git media_build directory
NOTE '/linux' suffix:
...
# From my vdr Make.config: #DVBDIR = /usr/local/src/v4l-dvb/current/linux #DVBDIR = /usr/local/src/linux-tbs-drivers/current/linux DVBDIR = /usr/local/src/linux-tbs-drivers/testing/linux
# Change to where you have downloaded and built your DVB stuff DVBDIR = /usr/local/src/dvb/media_build-git/linux
...
- make VDR and install
If you have followed these steps already then I'm sorry not to add anything new.
Regards,
Ian.
On 22 Jan 2012, at 11:03, Stuart Morris wrote:
Hi I have updated my DVB drivers using: git clone git://linuxtv.org/media_build.git cd media_build ./build make install
Yet VDR complains of the wrong DVB API version
number:
dvbdevice.h:18:2: error: #error VDR requires Linux DVB
driver API version 5.3 or higher!
/usr/include/linux/dvb/version.h reports version 5.2
and the date of the file is old, meaning it was not updated when the drivers were updated.
Can anybody explain what has gone wrong here? Thanks
--- On Sun, 15/1/12, Klaus Schmidinger Klaus.Schmidinger@tvdr.de
wrote:
From: Klaus Schmidinger Klaus.Schmidinger@tvdr.de Subject: [vdr] [ANNOUNCE] VDR developer version
1.7.23
To: vdr@linuxtv.org Date: Sunday, 15 January, 2012, 15:10 VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is available
at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11
vdr-1.7.23.tar.bz2
2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though *I* use
it in my
productive environment. I strongly recommend that you only
use it
under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl
(sorry, I
missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in
cRecordings::ScanVideoDir() (reported by Sundararaj Reel).
- Fixed a memory leak in
cRecordings::ScanVideoDir() in
case there are too many link levels (reported by
Sundararaj Reel).
- Removed redundant memset() in the ctor of
cSatCableNumbers (triggered by Ville Skyttä pointing out that
the argument
sequence in the call was wrong).
- Removed a redundant NULL check in
cDvbSpuDecoder::setTime() (thanks to Ville
Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY output
in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä
pointing out that the
variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to Rolf
Ahrenberg).
- Added support for HbbTV to libsi (thanks to
Christoph
Haubrich).
- Added support for devices with more than one
delivery
system per frontend. This requires a DVB driver with
version 5.5 or
higher that can handle the DTV_ENUM_DELSYS call. With older
drivers it will
fall back to one delivery system per frontend.
- Updated the Hungarian language texts (thanks to
István
Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure only
one tuner
sends SCR commands at any given time (reported by
Frank Neumann).
- cEvent::FixEpgBugs() now replaces any newline
characters
in stream component descriptions with blanks (thanks
to Torsten Lang for
reporting a problem with EPG data from BSkyB's "MTV
MUSIC",
S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData()
(thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To are
equal
(reported by Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks to
Rolf
Ahrenberg).
- Added support for handling DVB-T2 transponders.
This requires a DVB driver with version 5.3 or higher that
can handle the
DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version 4.7.0
(thanks to
Ville Skyttä).
- Fixed a possible memory corruption in
cTsToPes::GetPes()
in case of broken TS packets, e.g. when switching
channels.
- Fixed the SVDRP command CLRE for a single
channel in case
there are events that have a timer (thanks to Timo
Eskola).
- BIDI support now checks at runtime whether the
system
runs with UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and Frontend()
to
cDvbDevice (suggested by Rolf Ahrenberg).
- The parameters that are only used by "second
generation"
delivery systems (DVB-S2 and DVB-T2) are no longer written
into channels.conf
for "first generation" delivery systems (DVB-S and
DVB-T).
- Changed IndexToHMSF() so that it can handle
negative
Index values.
- Added option -N to the msgmerge call in the
Makefile,
because fuzzy translation mostly resulted in useless
strings.
- The new setup option "Replay/Show remaining
time" can be
used to switch between showing the total length or the
remaining time of
the recording that is currently replayed.
- Fixed wrongfully displaying the length of a
recording in
the title of the replay progress display.
- Fixed frozen live view with device bonding in
case the
bonded master is used for live viewing (reported by Uwe
Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I also had to copy compiler.h from my kernel sources to the media_build directory otherwise various plugins would not compile. cp /usr/src/kernels/2.6.35.14-96.fc14.i686.PAE/include/linux/compiler.h /usr/local/src/media_build/linux/include/linux/
--- On Sun, 22/1/12, Stuart Morris stuart_morris@talk21.com wrote:
From: Stuart Morris stuart_morris@talk21.com Subject: Re: [vdr] [ANNOUNCE] VDR developer version 1.7.23 To: "VDR Mailing List" vdr@linuxtv.org Date: Sunday, 22 January, 2012, 14:50 Thanks I pointed Make.config to the media_build/linux directory and built that way. I'm surprised because I fully expected the media_build script to install the headers to.
--- On Sun, 22/1/12, Ian Bates ian_and_joanna@talktalk.net wrote:
From: Ian Bates ian_and_joanna@talktalk.net Subject: Re: [vdr] [ANNOUNCE] VDR developer version
1.7.23
To: "VDR Mailing List" vdr@linuxtv.org Date: Sunday, 22 January, 2012, 12:40 Hi,
Something to try:
*Short answer*
Make sure VDR Make.config points to the appropriate media_build directory (DVBDIR variable)
*Longer answer*
I'm not sure a simple 'install' of the DVB drivers
changes
any system headers. So VDR needs to point the
headers
relevant to the available modules.
- Ensure you really have built and installed the
media_build DVB stack.
- Point VDR Make.config to your git media_build
directory
NOTE '/linux' suffix:
...
# From my vdr Make.config: #DVBDIR = /usr/local/src/v4l-dvb/current/linux #DVBDIR = /usr/local/src/linux-tbs-drivers/current/linux DVBDIR = /usr/local/src/linux-tbs-drivers/testing/linux
# Change to where you have downloaded and built your
DVB
stuff DVBDIR = /usr/local/src/dvb/media_build-git/linux
...
- make VDR and install
If you have followed these steps already then I'm
sorry not
to add anything new.
Regards,
Ian.
On 22 Jan 2012, at 11:03, Stuart Morris wrote:
Hi I have updated my DVB drivers using: git clone git://linuxtv.org/media_build.git cd media_build ./build make install
Yet VDR complains of the wrong DVB API version
number:
dvbdevice.h:18:2: error: #error VDR requires
Linux DVB
driver API version 5.3 or higher!
/usr/include/linux/dvb/version.h reports version
5.2
and the date of the file is old, meaning it was not
updated
when the drivers were updated.
Can anybody explain what has gone wrong here? Thanks
--- On Sun, 15/1/12, Klaus Schmidinger Klaus.Schmidinger@tvdr.de
wrote:
From: Klaus Schmidinger Klaus.Schmidinger@tvdr.de Subject: [vdr] [ANNOUNCE] VDR developer
version
1.7.23
To: vdr@linuxtv.org Date: Sunday, 15 January, 2012, 15:10 VDR developer version 1.7.23 is now available at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.23.tar.bz2
A 'diff' against the previous version is
available
at
ftp://ftp.tvdr.de/vdr/Developer/vdr-1.7.22-1.7.23.diff
MD5 checksums:
de136f7be28c4b6f1fa0e2218b4acc11
vdr-1.7.23.tar.bz2
2977b75cd8dacad187d11c10b867d56a vdr-1.7.22-1.7.23.diff
WARNING:
This is a *developer* version. Even though
*I* use
it in my
productive environment. I strongly recommend that you
only
use it
under controlled conditions and for testing and debugging.
The changes since version 1.7.22:
- Removed the '.pl' suffix from svdrpsend.pl
(sorry, I
missed that one).
- Fixed bonding more than two devices.
- Fixed handling symbolic links in
cRecordings::ScanVideoDir() (reported by Sundararaj Reel).
- Fixed a memory leak in
cRecordings::ScanVideoDir() in
case there are too many link levels (reported by
Sundararaj Reel).
- Removed redundant memset() in the ctor of
cSatCableNumbers (triggered by Ville Skyttä pointing out that
the argument
sequence in the call was wrong).
- Removed a redundant NULL check in
cDvbSpuDecoder::setTime() (thanks to Ville
Skyttä).
- Added HasSnr to the DEBUG_SIGNALQUALITY
output
in
cDvbTuner::GetSignalQuality() (triggered by Ville Skyttä
pointing out that the
variable HasSnr was unused).
- Updated the Finnish OSD texts (thanks to
Rolf
Ahrenberg).
- Added support for HbbTV to libsi (thanks
to
Christoph
Haubrich).
- Added support for devices with more than
one
delivery
system per frontend. This requires a DVB driver with
version 5.5 or
higher that can handle the DTV_ENUM_DELSYS call. With older
drivers it will
fall back to one delivery system per frontend.
- Updated the Hungarian language texts
(thanks to
István
Füley).
- cDvbTuner::ExecuteDiseqc() now makes sure
only
one tuner
sends SCR commands at any given time (reported by
Frank Neumann).
- cEvent::FixEpgBugs() now replaces any
newline
characters
in stream component descriptions with blanks (thanks
to Torsten Lang for
reporting a problem with EPG data from BSkyB's "MTV
MUSIC",
S28.2E-2-2010-7012).
- Fixed cDvbSubtitleConverter::SetOsdData()
(thanks to Rolf
Ahrenberg).
- Fixed cListBase::Move() in case From and To
are
equal
(reported by Sundararaj Reel).
- Added support for DVB-T2 to libsi (thanks
to
Rolf
Ahrenberg).
- Added support for handling DVB-T2
transponders.
This requires a DVB driver with version 5.3 or higher that
can handle the
DTV_DVBT2_PLP_ID call (thanks to Rolf Ahrenberg).
- Fixed cConfig::Load() for g++ version
4.7.0
(thanks to
Ville Skyttä).
- Fixed a possible memory corruption in
cTsToPes::GetPes()
in case of broken TS packets, e.g. when switching
channels.
- Fixed the SVDRP command CLRE for a single
channel in case
there are events that have a timer (thanks to Timo
Eskola).
- BIDI support now checks at runtime whether
the
system
runs with UTF-8 (suggested by Torsten Lang).
- Added member functions Adapter() and
Frontend()
to
cDvbDevice (suggested by Rolf Ahrenberg).
- The parameters that are only used by
"second
generation"
delivery systems (DVB-S2 and DVB-T2) are no longer written
into channels.conf
for "first generation" delivery systems (DVB-S and
DVB-T).
- Changed IndexToHMSF() so that it can
handle
negative
Index values.
- Added option -N to the msgmerge call in
the
Makefile,
because fuzzy translation mostly resulted in useless
strings.
- The new setup option "Replay/Show
remaining
time" can be
used to switch between showing the total length or the
remaining time of
the recording that is currently replayed.
- Fixed wrongfully displaying the length of
a
recording in
the title of the replay progress display.
- Fixed frozen live view with device bonding
in
case the
bonded master is used for live viewing (reported by Uwe
Scheffler).
Have fun!
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
-
Halim Sahin -
Hawes, Mark -
Ian Bates -
Klaus Schmidinger -
Lars Hanisch -
Steffen Barszus -
Stuart Morris -
VDR User