Channels.conf (relevant part, i think) looks something like this
MTV3;MTV Oy=Digita Finland:482:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0 Nelonen;Sanoma Television Oy=Digita Finland:482:B8C23D23G8M64N4S0T8Y0:T:0:512=2:650=fin@4,658=dut@4:5012:0:65:8438:8193:0 Sub;SubTV OY=Digita Finland:482:B8C23D23G8M64N6S0T8Y0:T:0:353=2:609=fin@4:5010:0:97:8438:8193:0 Liv;Sanoma Television Oy=Digita Finland:482:B8C23D23G8M64N8S0T8Y0:T:0:516=2:690=fin@4:5012:0:177:8438:8193:0 Jim;Sanoma Television OY:658000000:B8C23D23G8M64N9S0T8Y0:T:27500:522=2:720=fin@4:0:0:129:8438:20481:0 Kutonen;SBS Finland:658000000:B8C23D23G8M64N11S0T8Y0:T:27500:523=2:655=fin@4:0:0:178:8438:20481:0
All of these tune fine. However if I set UpdateChannels to 4 (new channels) or 5 (new transponders) after a couple of seconds it turns into this
MTV3;MTV Oy=Digita Finland:658000000:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0 Nelonen;Sanoma Television Oy=Digita Finland:658000000:B8C23D23G8M64N4S0T8Y0:T:0:512=2:650=fin@4,658=dut@4:5012:0:65:8438:8193:0 Sub;SubTV OY=Digita Finland:658000000:B8C23D23G8M64N6S0T8Y0:T:0:353=2:609=fin@4:5010:0:97:8438:8193:0 Liv;Sanoma Television Oy=Digita Finland:658000000:B8C23D23G8M64N8S0T8Y0:T:0:516=2:690=fin@4:5012:0:177:8438:8193:0 Jim;Sanoma Television OY:658000000:B8C23D23G8M64N9S0T8Y0:T:27500:522=2:720=fin@4:0:0:129:8438:20481:0 Kutonen;SBS Finland:658000000:B8C23D23G8M64N11S0T8Y0:T:27500:523=2:655=fin@4:0:0:178:8438:20481:0
and obviously those channels at 482MHz no longer work.
How is this useful and how do I make it stop? Keeping UpdateChannels at 3 has been my non-solution for some years now but it's getting annoying when channels seem to change their settings so infuriatingly often.
On 05.02.2014 12:03, Jukka Tastula wrote:
Channels.conf (relevant part, i think) looks something like this
MTV3;MTV Oy=Digita Finland:482:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0 Nelonen;Sanoma Television Oy=Digita Finland:482:B8C23D23G8M64N4S0T8Y0:T:0:512=2:650=fin@4,658=dut@4:5012:0:65:8438:8193:0 Sub;SubTV OY=Digita Finland:482:B8C23D23G8M64N6S0T8Y0:T:0:353=2:609=fin@4:5010:0:97:8438:8193:0 Liv;Sanoma Television Oy=Digita Finland:482:B8C23D23G8M64N8S0T8Y0:T:0:516=2:690=fin@4:5012:0:177:8438:8193:0 Jim;Sanoma Television OY:658000000:B8C23D23G8M64N9S0T8Y0:T:27500:522=2:720=fin@4:0:0:129:8438:20481:0 Kutonen;SBS Finland:658000000:B8C23D23G8M64N11S0T8Y0:T:27500:523=2:655=fin@4:0:0:178:8438:20481:0
All of these tune fine. However if I set UpdateChannels to 4 (new channels) or 5 (new transponders) after a couple of seconds it turns into this
MTV3;MTV Oy=Digita Finland:658000000:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0 Nelonen;Sanoma Television Oy=Digita Finland:658000000:B8C23D23G8M64N4S0T8Y0:T:0:512=2:650=fin@4,658=dut@4:5012:0:65:8438:8193:0 Sub;SubTV OY=Digita Finland:658000000:B8C23D23G8M64N6S0T8Y0:T:0:353=2:609=fin@4:5010:0:97:8438:8193:0 Liv;Sanoma Television Oy=Digita Finland:658000000:B8C23D23G8M64N8S0T8Y0:T:0:516=2:690=fin@4:5012:0:177:8438:8193:0 Jim;Sanoma Television OY:658000000:B8C23D23G8M64N9S0T8Y0:T:27500:522=2:720=fin@4:0:0:129:8438:20481:0 Kutonen;SBS Finland:658000000:B8C23D23G8M64N11S0T8Y0:T:27500:523=2:655=fin@4:0:0:178:8438:20481:0
and obviously those channels at 482MHz no longer work.
How is this useful and how do I make it stop? Keeping UpdateChannels at 3 has been my non-solution for some years now but it's getting annoying when channels seem to change their settings so infuriatingly often.
For testing, can you please remove the channels with 658000000? Or, better yet, start VDR with a channels.conf that contains only one single line:
MTV3;MTV Oy=Digita Finland:482:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0
and see what happens.
Klaus
On Wed, 05 Feb 2014 12:10:58 +0100 Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
For testing, can you please remove the channels with 658000000? Or, better yet, start VDR with a channels.conf that contains only one single line:
MTV3;MTV Oy=Digita Finland:482:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0
and see what happens.
It seems any combination alone or together with anything other than 658 works and new channels at those frequencies are discovered, but once I add anything with 658 in it it immediately causes 482 to change to 658.
On 06.02.2014 00:36, Jukka Tastula wrote:
On Wed, 05 Feb 2014 12:10:58 +0100 Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
For testing, can you please remove the channels with 658000000? Or, better yet, start VDR with a channels.conf that contains only one single line:
MTV3;MTV Oy=Digita Finland:482:B8C23D23G8M64N3S0T8Y0:T:0:305=2:561=fin@4,562=dut@4:5010;1073=fin,1074=dut:0:49:8438:8193:0
and see what happens.
It seems any combination alone or together with anything other than 658 works and new channels at those frequencies are discovered, but once I add anything with 658 in it it immediately causes 482 to change to 658.
Now please test the other way round and start VDR with only one single 658 entry. Once it has received all other channels on that transponder, are there any that would actually have to be 482?
Klaus
On 02/06/2014 11:03 AM, Klaus Schmidinger wrote:
Now please test the other way round and start VDR with only one single 658 entry. Once it has received all other channels on that transponder, are there any that would actually have to be 482?
No. Every channel in the list is unique to 658 alone.
On 07.02.2014 12:10, Jukka Tastula wrote:
On 02/06/2014 11:03 AM, Klaus Schmidinger wrote:
Now please test the other way round and start VDR with only one single 658 entry. Once it has received all other channels on that transponder, are there any that would actually have to be 482?
No. Every channel in the list is unique to 658 alone.
Well, then apparently there is something going wrong in VDR. Which version of VDR are you using? If this is not the latest developer version (2.1.5), please check whether the problem still persists in version 2.1.5.
Klaus
2.1.5? Typo? On ftp.tvdr.de 2.1.4 is the latest development version?!?
On 7. Februar 2014 12:47:36 MEZ, Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
On 07.02.2014 12:10, Jukka Tastula wrote:
On 02/06/2014 11:03 AM, Klaus Schmidinger wrote:
Now please test the other way round and start VDR with only one
single 658 entry.
Once it has received all other channels on that transponder, are
there any that
would actually have to be 482?
No. Every channel in the list is unique to 658 alone.
Well, then apparently there is something going wrong in VDR. Which version of VDR are you using? If this is not the latest developer version (2.1.5), please check whether the problem still persists in version 2.1.5.
Klaus
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
On 07.02.2014 13:10, Ingo Prochaska wrote:
2.1.5? Typo? On ftp.tvdr.de http://ftp.tvdr.de 2.1.4 is the latest development version?!?
Sorry, you're right, of course. It's 2.1.4.
Kaus
On 7. Februar 2014 12:47:36 MEZ, Klaus Schmidinger Klaus.Schmidinger@tvdr.de wrote:
On 07.02.2014 12:10, Jukka Tastula wrote: On 02/06/2014 11:03 AM, Klaus Schmidinger wrote: Now please test the other way round and start VDR with only one single 658 entry. Once it has received all other channels on that transponder, are there any that would actually have to be 482? No. Every channel in the list is unique to 658 alone. Well, then apparently there is something going wrong in VDR. Which version of VDR are you using? If this is not the latest developer version (2.1.5), please check whether the problem still persists in version 2.1.5. Klaus
-
Ingo Prochaska -
Jukka Tastula -
Klaus Schmidinger