Hi all, I am using vdr 1.4.0. I compiled it with REMOTE=LIRC. I only need LIRC to control VDR so I started it with the following command:
./vdr -u vdr --no-kbd
After that VDR starts, but does not ask me to press a key on the remote for LIRC. Is there a way to only "teach" VDR the keys for LIRC or do I always have to start with the keyboard?
Thank you a lot in advance. André
Hello André,
On Wed, 10 May 2006 11:03:02 +0200 André Weidemann Andre.Weidemann@web.de wrote:
| Hi all, | I am using vdr 1.4.0. I compiled it with REMOTE=LIRC. | I only need LIRC to control VDR so I started it with the following command: | | ./vdr -u vdr --no-kbd | | After that VDR starts, but does not ask me to press a key on the remote | for LIRC. | Is there a way to only "teach" VDR the keys for LIRC or do I always have | to start with the keyboard? |
Try to compile VDR with NO_KBD=1 and see if that helps.
Thanks,
Philippe
André Weidemann wrote:
Hi all, I am using vdr 1.4.0. I compiled it with REMOTE=LIRC. I only need LIRC to control VDR so I started it with the following command:
./vdr -u vdr --no-kbd
After that VDR starts, but does not ask me to press a key on the remote for LIRC. Is there a way to only "teach" VDR the keys for LIRC or do I always have to start with the keyboard?
This might be the same problem as reported by Helmut Auer in a PM. Please try the attached fix.
Klaus
On Friday 12 May 2006 15:36, Klaus Schmidinger wrote:
André Weidemann wrote:
Hi all, I am using vdr 1.4.0. I compiled it with REMOTE=LIRC. I only need LIRC to control VDR so I started it with the following command:
./vdr -u vdr --no-kbd
After that VDR starts, but does not ask me to press a key on the remote for LIRC. Is there a way to only "teach" VDR the keys for LIRC or do I always have to start with the keyboard?
This might be the same problem as reported by Helmut Auer in a PM. Please try the attached fix.
Works good. Will be included in next vdr-1.4.0 ebuild for Gentoo.
Matthias