Today I have the time to test my motor stab HH100. I use for test two satellites position in my diseqc.conf:

#Hot Bird S13E 11700 V 9750 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t S13E 99999 V 10600 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T S13E 11700 H 9750 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t S13E 99999 H 10600 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T

#Astra S19.2E 11700 V 9750 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t S19.2E 99999 V 10600 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T S19.2E 11700 H 9750 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t S19.2E 99999 H 10600 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T

I try to drive the motor east or ovest with the menu command, but the motor don't move. Also the gotox function I have the same problem. In log files I have this erros:

Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,70): Operation not permitted Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,74): Operation not permitted Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,76): Operation not permitted

Where I mistake?

Rudy.

Martin Spears ha scritto:

here is my rotor diseqc.conf file

# DiSEqC configuration for VDR # # Format: # # satellite slof polarization lof command... # # satellite: one of the 'S' codes defined in sources.conf # slof: switch frequency of LNB; the first entry with # an slof greater than the actual transponder # frequency will be used # polarization: V = vertical, H = horizontal # lof: the local oscillator frequency to subtract from # the actual transponder frequency # command: # t tone off # T tone on # v voltage low (13V) # V voltage high (18V) # A mini A # B mini B # Wnn wait nn milliseconds (nn may be any positive integer number) # [xx ...] hex code sequence (max. 6) # # The 'command...' part is optional. # # Examples:

# Full DiSEqC sequence: # # Einstellen des SG-2100 Motors: # # in Richtung 10 Grad drehen (Antenne zur Wand) # Den Resetkopf drücken und 2 Sekunden lang halten # Dann ist die eingestellte Tabelle aktiv. Durch drücken # von Kanal 1 (ARD) oder einem Kanal der auf HotBird liegt, # wird die Position angefahren. # # (R) rob, 02.11.2003, 00:15 Uhr bei Regen ;-( # S119W 11250 V 99999 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t S119W 99999 V 11250 t v W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T S119W 11250 H 99999 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 t S119W 99999 H 11250 t V W15 [E0 31 6B 01] W1 [E0 31 6B 01] W1 [E0 31 6B 01] W15 T

S110W 11250 V 99999 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t S110W 99999 V 11250 t v W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T S110W 11250 H 99999 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 t S110W 99999 H 11250 t V W15 [E0 31 6B 02] W1 [E0 31 6B 02] W1 [E0 31 6B 02] W15 T

S61.5W 11250 V 99999 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 t S61.5W 99999 V 11250 t v W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 T S61.5W 11250 H 99999 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 t S61.5W 99999 H 11250 t V W15 [E0 31 6B 03] W1 [E0 31 6B 03] W1 [E0 31 6B 03] W15 T

S91W 11250 V 99999 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 t S91W 99999 V 11250 t v W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 T S91W 11250 H 99999 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 t S91W 99999 H 11250 t V W15 [E0 31 6B 04] W1 [E0 31 6B 04] W1 [E0 31 6B 04] W15 T

S7E 11700 V 9750 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 t S7E 99999 V 10600 t v W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 T S7E 11700 H 9750 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 t S7E 99999 H 10600 t V W15 [E0 31 6B 05] W1 [E0 31 6B 05] W1 [E0 31 6B 05] W15 T

S5E 11700 V 9750 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 t S5E 99999 V 10600 t v W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 T S5E 11700 H 9750 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 t S5E 99999 H 10600 t V W15 [E0 31 6B 06] W1 [E0 31 6B 06] W1 [E0 31 6B 06] W15 T

S5W 11700 V 9750 t v W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B 09] W15 t S5W 99999 V 10600 t v W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B 09] W15 T S5W 11700 H 9750 t V W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B 09] W15 t S5W 99999 H 10600 t V W15 [E0 31 6B 09] W1 [E0 31 6B 09] W1 [E0 31 6B 09] W15 T

S8W 11700 V 9750 t v W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B 0A] W15 t S8W 99999 V 10600 t v W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B 0A] W15 T S8W 11700 H 9750 t V W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B 0A] W15 t S8W 99999 H 10600 t V W15 [E0 31 6B 0A] W1 [E0 31 6B 0A] W1 [E0 31 6B 0A] W15 T

S18W 11700 V 9750 t v W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B 0B] W15 t S18W 99999 V 10600 t v W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B 0B] W15 T S18W 11700 H 9750 t V W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B 0B] W15 t S18W 99999 H 10600 t V W15 [E0 31 6B 0B] W1 [E0 31 6B 0B] W1 [E0 31 6B 0B] W15 T

S21.5W 11700 V 9750 t v W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B 0C] W15 t S21.5W 99999 V 10600 t v W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B 0C] W15 T S21.5W 11700 H 9750 t V W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B 0C] W15 t S21.5W 99999 H 10600 t V W15 [E0 31 6B 0C] W1 [E0 31 6B 0C] W1 [E0 31 6B 0C] W15 T

S27.5W 11700 V 9750 t v W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B 0D] W15 t S27.5W 99999 V 10600 t v W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B 0D] W15 T S27.5W 11700 H 9750 t V W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B 0D] W15 t S27.5W 99999 H 10600 t V W15 [E0 31 6B 0D] W1 [E0 31 6B 0D] W1 [E0 31 6B 0D] W15 T

S30W 11700 V 9750 t v W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B 0E] W15 t S30W 99999 V 10600 t v W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B 0E] W15 T S30W 11700 H 9750 t V W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B 0E] W15 t S30W 99999 H 10600 t V W15 [E0 31 6B 0E] W1 [E0 31 6B 0E] W1 [E0 31 6B 0E] W15 T

S37.5W 11700 V 9750 t v W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B 0F] W15 t S37.5W 99999 V 10600 t v W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B 0F] W15 T S37.5W 11700 H 9750 t V W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B 0F] W15 t S37.5W 99999 H 10600 t V W15 [E0 31 6B 0F] W1 [E0 31 6B 0F] W1 [E0 31 6B 0F] W15 T

S23.5E 11700 V 9750 t v W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B 10] W15 t S23.5E 99999 V 10600 t v W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B 10] W15 T S23.5E 11700 H 9750 t V W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B 10] W15 t S23.5E 99999 H 10600 t V W15 [E0 31 6B 10] W1 [E0 31 6B 10] W1 [E0 31 6B 10] W15 T

S26E 11700 V 9750 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 t S26E 99999 V 10600 t v W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 T S26E 11700 H 9750 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 t S26E 99999 H 10600 t V W15 [E0 31 6B 11] W1 [E0 31 6B 11] W1 [E0 31 6B 11] W15 T

S28.5E 11700 V 9750 t v W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B 12] W15 t S28.5E 99999 V 10600 t v W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B 12] W15 T S28.5E 11700 H 9750 t V W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B 12] W15 t S28.5E 99999 H 10600 t V W15 [E0 31 6B 12] W1 [E0 31 6B 12] W1 [E0 31 6B 12] W15 T

S30.5E 11700 V 9750 t v W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B 14] W15 t S30.5E 99999 V 10600 t v W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B 14] W15 T S30.5E 11700 H 9750 t V W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B 14] W15 t S30.5E 99999 H 10600 t V W15 [E0 31 6B 14] W1 [E0 31 6B 14] W1 [E0 31 6B 14] W15 T

S31.3E 11700 V 9750 t v W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B 15] W15 t S31.3E 99999 V 10600 t v W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B 15] W15 T S31.3E 11700 H 9750 t V W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B 15] W15 t S31.3E 99999 H 10600 t V W15 [E0 31 6B 15] W1 [E0 31 6B 15] W1 [E0 31 6B 15] W15 T

S42E 11700 V 9750 t v W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B 16] W15 t S42E 99999 V 10600 t v W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B 16] W15 T S42E 11700 H 9750 t V W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B 16] W15 t S42E 99999 H 10600 t V W15 [E0 31 6B 16] W1 [E0 31 6B 16] W1 [E0 31 6B 16] W15 T

S45W 11700 V 9750 t v W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B 18] W15 t S45W 99999 V 10600 t v W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B 18] W15 T S45W 11700 H 9750 t V W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B 18] W15 t S45W 99999 H 10600 t V W15 [E0 31 6B 18] W1 [E0 31 6B 18] W1 [E0 31 6B 18] W15 T

S4W 11700 V 9750 t v W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B 19] W15 t S4W 99999 V 10600 t v W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B 19] W15 T S4W 11700 H 9750 t V W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B 19] W15 t S4W 99999 H 10600 t V W15 [E0 31 6B 19] W1 [E0 31 6B 19] W1 [E0 31 6B 19] W15 T

S1W 11700 V 9750 t v W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B 1A] W15 t S1W 99999 V 10600 t v W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B 1A] W15 T S1W 11700 H 9750 t V W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B 1A] W15 t S1W 99999 H 10600 t V W15 [E0 31 6B 1A] W1 [E0 31 6B 1A] W1 [E0 31 6B 1A] W15 T

S7W 11700 V 9750 t v W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B 1B] W15 t S7W 99999 V 10600 t v W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B 1B] W15 T S7W 11700 H 9750 t V W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B 1B] W15 t S7W 99999 H 10600 t V W15 [E0 31 6B 1B] W1 [E0 31 6B 1B] W1 [E0 31 6B 1B] W15 T

S12.5W 11700 V 9750 t v W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B 1C] W15 t S12.5W 99999 V 10600 t v W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B 1C] W15 T S12.5W 11700 H 9750 t V W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B 1C] W15 t S12.5W 99999 H 10600 t V W15 [E0 31 6B 1C] W1 [E0 31 6B 1C] W1 [E0 31 6B 1C] W15 T

On Tue, 2005-03-15 at 20:47 +0100, Rudy Sgorlon wrote:

...

Hello, I don't know the exact disecq command to write in file diseqc.conf. How I have to modify the disecq.conf?

Thank's, Rudy.

---

vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

---

vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Thomas Bergwinkl ha scritto:

Rudy Sgorlon wrote:

...

I try to drive the motor east or ovest with the menu command, but the motor don't move. Also the gotox function I have the same problem. In log files I have this erros:

Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,70): Operation not permitted Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,74): Operation not permitted Apr 24 18:17:46 vdrbox vdr[2939]: ERROR (diseqc.c,76): Operation not permitted

Where I mistake?

This is a known problem. You probably use a 2.6 kernel. Please patch vdr with the fd_frontend-patch (you find it in the patches directory of the plugin) and don't forget to rebuild both vdr and the plugin. Afterwards everything should work fine.

Thomas

---

vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

Ok, now works. Thank's. Rudy.