Hi List, I tested reelchannelscan on my vdr-1.7.15 and had problems with it. It crashs when using it with empty channels.conf, because it need a tuned channel before scanning. When started with an empty channels.conf there is no channel tuned and the plugin gets no valid initial channel data.
Do we have a fix for that issue?
Who does maintain an oficial (vdr) compatible version of the plugin? BR. halim
I tested reelchannelscan on my vdr-1.7.15 and had problems with it. It crashs when using it with empty channels.conf, because it need a tuned channel before scanning. When started with an empty channels.conf there is no channel tuned and the plugin gets no valid initial channel data.
Do we have a fix for that issue?
Who does maintain an oficial (vdr) compatible version of the plugin?
imho - nobody
have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/
it can scan dvb-s2 channels (see the discussion in vdr list about this plugin)
Al 21/10/10 20:03, En/na Goga777 ha escrit:
I tested reelchannelscan on my vdr-1.7.15 and had problems with it. It crashs when using it with empty channels.conf, because it need a tuned channel before scanning. When started with an empty channels.conf there is no channel tuned and the plugin gets no valid initial channel data.
Do we have a fix for that issue?
Who does maintain an oficial (vdr) compatible version of the plugin?
imho - nobody
have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/
it can scan dvb-s2 channels (see the discussion in vdr list about this plugin)
Though I don't have the hardware to test dvb-s2 and I never tried with an empty channels.conf.
Bye
a777 ha escrit:
I tested reelchannelscan on my vdr-1.7.15 and had problems with it. It crashs when using it with empty channels.conf, because it need a tuned channel before scanning. When started with an empty channels.conf there is no channel tuned and the plugin gets no valid initial channel data.
Do we have a fix for that issue?
Who does maintain an oficial (vdr) compatible version of the plugin?
imho - nobody
have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/
it can scan dvb-s2 channels (see the discussion in vdr list about this plugin)
Though I don't have the hardware to test dvb-s2 and I never tried with an empty channels.conf.
yes, your plugin is working well with dvb-s2 transponders, tested with vdr 1.7.16
thank you very much for your scaner
Hi, On Thu, Oct 21, 2010 at 10:03:05PM +0400, Goga777 wrote:
have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/
I read only about dvb-s/s2 support in the announcement. Unfortunately in need also dvb-t and maybe later dvb-c (I am looking for dvb-c hw currently :-().
It would really be cool to have a working channelscan plugin which could be shipped with vdr! Regards Halim
En/na Halim Sahin ha escrit:
Hi, On Thu, Oct 21, 2010 at 10:03:05PM +0400, Goga777 wrote:
have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/
I read only about dvb-s/s2 support in the announcement. Unfortunately in need also dvb-t and maybe later dvb-c (I am looking for dvb-c hw currently :-().
Yes, unfortunately it only supports dvb-s/s2 (don't forget it's meant to work as an actuator, channel tuning/scanning is just an aid to point the dish). It also currently work with only one card (the card connected to the motor), so it'll probably fail in multiple cards setups. I don't think I can easily adapt it to dvb-t/dvb-c :-(
Bye
--- On Fri, 22/10/10, Luca Olivetti luca@ventoso.org wrote:
From: Luca Olivetti luca@ventoso.org Subject: Re: [vdr] reelchannelscan not working with empty channels.conf! To: "VDR Mailing List" vdr@linuxtv.org Date: Friday, 22 October, 2010, 10:04 En/na Halim Sahin ha escrit:
Hi, On Thu, Oct 21, 2010 at 10:03:05PM +0400, Goga777
wrote:
have a look on actuator plugin from Luca http://www.ventoso.org/luca/vdr/
I read only about dvb-s/s2 support in the
announcement. Unfortunately in need also dvb-t and maybe
later dvb-c (I am looking for dvb-c hw currently
:-().
Yes, unfortunately it only supports dvb-s/s2 (don't forget it's meant to work as an actuator, channel tuning/scanning is just an aid to point the dish). It also currently work with only one card (the card connected to the motor), so it'll probably fail in multiple cards setups. I don't think I can easily adapt it to dvb-t/dvb-c :-(
Bye -- Luca
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Have you tried the wirbelscan plugin?