Hi!
I'm running VDR 1.4 on a DVB-S system without CICAM (so I can watch only unencrypted/free-to-all channels). VDR 1.4 adds all channels it discovers to the channels list so I've got about 1000 channels in the list now, including radio channels. However, only very few of them are actually viewable since most are encrypted. Since this is impractical for zapping (try to go to a channel that's located about at the 700th position if you don't know its exact position and almost all 700s channels give "Channel not available" when typing in their number ;-) and for example master-timer programs tons of unusable timers (since the EPG for encrypted channels still gets received)...
1. Is there a way to limit the channels VDR adds to the channel list to those that can be viewed with the hardware setup?
2. Is it possible to move radio stations to the end of the list (or something similar)?
Regards
En/na M.Kiesel ha escrit:
Hi!
I'm running VDR 1.4 on a DVB-S system without CICAM (so I can watch only unencrypted/free-to-all channels). VDR 1.4 adds all channels it discovers to the channels list so I've got about 1000 channels in the list now, including radio channels. However, only very few of them are actually viewable since most are encrypted. Since this is impractical for zapping (try to go to a channel that's located about at the 700th position if you don't know its exact position and almost all 700s channels give "Channel not available" when typing in their number ;-) and for example master-timer programs tons of unusable timers (since the EPG for encrypted channels still gets received)...
Modify the function cDvbDevice::ProvidesCa in dvbdevice.c to always return true (I do this not only to avoid the "Channel not available" problem, but also because there are some channels that are falsely advertised as encrypted while they aren't).
- Is there a way to limit the channels VDR adds to the channel list to
those that can be viewed with the hardware setup?
- Is it possible to move radio stations to the end of the list (or
something similar)?
Not extactly but I made a patch to filter the channel list to show only tv/only radio/all channels (and of course up and down only cycle according to the current selection). Look in http://ventoso.org/luca/vdr/patches for the channel-filter patch (although it says 1.3.46 I'm using it with 1.4). A previous version used the 1 key in the channels menu to switch the filter on the fly, but that's no longer possible since vdr now uses all available keys in the channels list.
Bye
M.Kiesel wrote:
- Is it possible to move radio stations to the end of the list (or
something similar)?
You can get rid of those pesky radiochannels for good by commenting out one line in sdt.c file
---- switch (sd->getServiceType()) { case 0x01: // digital television service // case 0x02: // digital radio sound service case 0x04: // NVOD reference service case 0x05: // NVOD time-shifted service { ----
Then you need to clean your channels.conf manually, but now it stays clean.
- Is there a way to limit the channels VDR adds to the channel list to
those that can be viewed with the hardware setup?
That's a frequently requested feature...
- Is it possible to move radio stations to the end of the list (or
something similar)?
Use the autosort plugin. With that, you can also move the encrypted channels to the end of the list.
Olaf