The target machine needs libz and libbz2 do you have both of these installed? and are you sure that you have libboost-iostreams-dev installed properly.
Hope this helps.
works fine for me except that at the end of a scan it returns to channel 1 and not the last channel ( pain in the arse)
Mike
Goga:
I don't know what
make[1]: *** Нет правила для сборки цели `bzlib.h', требуемой для `bzip2.o'. Останов.
means. I suppose you are missing zlib or bzlib???
Mike: I use gentoo as my system and I suppose all needed libraries are installed because I did not get any of your errors.
However the "redefinition of type xxxx" messages you get as warning (not errors) from g++, I get them as well.
Hope this helps
Vagelis
Mike Booth wrote:
The target machine needs libz and libbz2 do you have both of these installed? and are you sure that you have libboost-iostreams-dev installed properly.
Hope this helps.
works fine for me except that at the end of a scan it returns to channel 1 and not the last channel ( pain in the arse)
Mike
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I don't know what
make[1]: *** Нет правила для сборки цели `bzlib.h', требуемой для `bzip2.o'. Останов.
means. I suppose you are missing zlib or bzlib???
yes, you are right - one of them was not installed. After installation this dev-package I coukd compile reelcnahhelscan But I had warnings (not errors)
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# make g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include channelscan.c In file included from scan.h:34, from csmenu.h:42, from channelscan.c:31: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from channelscan.c:31: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition
However the "redefinition of type xxxx" messages you get as warning (not errors) from g++, I get them as well.
do you mean the warnings about which I wrote above ?
Goga777
Hello again,
Yes it is about the same warnings. Unfortunately I don't have much free time during the last days to try to improve the patch. I may manage to work on it the next days.
Any suggestions on how we can make the plugin work with DVB-S2 are very welcome.
Vagelis
Goga777 wrote:
I don't know what
make[1]: *** Нет правила для сборки цели `bzlib.h', требуемой для `bzip2.o'. Останов.
means. I suppose you are missing zlib or bzlib???
yes, you are right - one of them was not installed. After installation this dev-package I coukd compile reelcnahhelscan But I had warnings (not errors)
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# make g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include channelscan.c In file included from scan.h:34, from csmenu.h:42, from channelscan.c:31: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from channelscan.c:31: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition
However the "redefinition of type xxxx" messages you get as warning (not errors) from g++, I get them as well.
do you mean the warnings about which I wrote above ?
Goga777
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I attach a new patch that will scan both DVB-S and DVB-S2 channels.
If anybody tries it please post back.
Thanks Vagelis
Vangelis Nonas wrote:
Hello again,
Yes it is about the same warnings. Unfortunately I don't have much free time during the last days to try to improve the patch. I may manage to work on it the next days.
Any suggestions on how we can make the plugin work with DVB-S2 are very welcome.
Vagelis
Goga777 wrote:
I don't know what
make[1]: *** Нет правила для сборки цели `bzlib.h', требуемой для `bzip2.o'. Останов.
means. I suppose you are missing zlib or bzlib???
yes, you are right - one of them was not installed. After installation this dev-package I coukd compile reelcnahhelscan But I had warnings (not errors)
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# make g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include channelscan.c In file included from scan.h:34, from csmenu.h:42, from channelscan.c:31: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from channelscan.c:31: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition
However the "redefinition of type xxxx" messages you get as warning (not errors) from g++, I get them as well.
do you mean the warnings about which I wrote above ?
Goga777
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
I attach a new patch that will scan both DVB-S and DVB-S2 channels.
If anybody tries it please post back.
Unfortunately I and other vdr-user couldn't lock the dvb-s2 channels with this patch. there's new warning during of compilation
============================================= ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition scan.c: In member function ‘void cScan::ScanServices()’: scan.c:248: warning: unused variable ‘tt’ scan.c: In member function ‘void cScan::ScanDVB_S(cTransponder*, cChannel*)’: scan.c:412: warning: unused variable ‘tt’ ============================================
====================================================== May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S19.2E" May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S19.2E.tpl. bz2 --- try uncompressed =======================================================
hereafter is my steps
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# svn revert -R ./ Reverted 'channelscan.c' Reverted 'transponders.c' Reverted 'scan.c' Reverted 'filter.c' Reverted 'csmenu.c'
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# svn up At revision 6236.
make clean-plugins make plugins
Plugin reelchannelscan: make[1]: Entering directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1' make[1]: Leaving directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1' make[1]: Entering directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1' g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include channelscan.c In file included from scan.h:34, from csmenu.h:42, from channelscan.c:31: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from channelscan.c:31: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include csmenu.c In file included from scan.h:34, from csmenu.h:42, from csmenu.c:43: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from ../../../include/vdr/menu.h:14, from csmenu.c:40: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include filter.c In file included from scan.h:34, from csmenu.h:42, from filter.c:35: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from filter.c:35: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include i18n.c g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include scan.c In file included from scan.h:34, from csmenu.h:42, from scan.c:36: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.c:32: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition scan.c: In member function ‘void cScan::ScanServices()’: scan.c:248: warning: unused variable ‘tt’ scan.c: In member function ‘void cScan::ScanDVB_S(cTransponder*, cChannel*)’: scan.c:412: warning: unused variable ‘tt’ g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include transponders.c g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include bzip2.c g++ -fPIC -O2 -Wall -Woverloaded-virtual -lbz2 -lz -shared channelscan.o csmenu.o filter.o i18n.o scan.o transponders.o bzip2.o -o libvdr-reelchannelscan.so make[1]: Leaving directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1'
I tried to make auto & manual scan
debug [scan] Stop Replay Card Number 0 SET DEBUG [scan.c] scanning_on_receiving _device TRUE DEBUG [channelscan]: loop through transponders ++++ size 1 ++++++++
DEBUG [channelscan]: loop through transponders ++++ size 1 ++++++++ DEBUG [channelscan]: scan f: 11914 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11914 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11914 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- --- End of transponderlist. End of scan! Duratation 12 --- Assumed HD Transponders
I use etc/vdr/plugins/transponders/S19.2E.tpl [SATTYPE] 1=S19.2E 2=Astra 1F/1G/1H/1KR/1L [Ku DVB-S2] 3=East 4=19.2
[DVB] 0=3 1=11914,H,27500,910,S2 2=12522,V,22000,23,S2 3=12581,V,22000,23,S2
BUT in syslog I can see
May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S19.2E" May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S19.2E.tpl. bz2 --- try uncompressed May 31 22:08:20 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1 May 31 22:08:20 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0 May 31 22:08:20 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0 May 31 22:08:20 localhost last message repeated 2 times May 31 22:08:20 localhost vdr: [4645] start Scanning @ Card 0 --- May 31 22:08:20 localhost vdr: [5644] transfer thread ended (pid=4645, tid=5644) May 31 22:08:20 localhost vdr: [4645] buffer stats: 98324 (4%) used May 31 22:08:20 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 22:08:20 localhost vdr: [5655] maxmods = 3 May 31 22:08:20 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 22:08:20 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:20 localhost vdr: [5646] TS buffer on device 1 thread ended (pid=4645, tid=5646) May 31 22:08:20 localhost vdr: [5645] buffer stats: 97948 (4%) used May 31 22:08:21 localhost vdr: [5645] receiver on device 1 thread ended (pid=4645, tid=5645) May 31 22:08:22 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111914 ------------- May 31 22:08:26 localhost last message repeated 2 times May 31 22:08:26 localhost vdr: [5655] maxmods = 3 May 31 22:08:28 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 22:08:28 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:28 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111914 ------------- May 31 22:08:32 localhost last message repeated 2 times May 31 22:08:32 localhost vdr: [5655] maxmods = 3 May 31 22:08:32 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:34 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212522 ------------- May 31 22:08:38 localhost last message repeated 2 times May 31 22:08:38 localhost vdr: [5655] maxmods = 3 May 31 22:08:40 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 22:08:40 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:40 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212522 ------------- May 31 22:08:44 localhost last message repeated 2 times May 31 22:08:44 localhost vdr: [5655] maxmods = 3 May 31 22:08:44 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:46 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212581 ------------- May 31 22:08:50 localhost last message repeated 2 times May 31 22:08:50 localhost vdr: [5655] maxmods = 3 May 31 22:08:52 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 22:08:52 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:52 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212581 ------------- May 31 22:08:56 localhost last message repeated 2 times May 31 22:09:01 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 212581
Hello Goga,
I tested it with automatic scan (dont know if manual scan works). Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up both DVB-S AND DVB-S2 channels. I haven't done any more testing with other parameters. I have Hotbird in my installation and it picked up in total 1626 services (TV+Radio). Maybe it missed a few (my satellite box gets about 2050, but this number includes data services). Moreover I dont know whether the file with the transponders for Hotbird ( (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it is missing a few transponders.
During compilation, I get the warning as well.
Can you try again with default parameters and post back pls?
Thanks Vagelis
Goga777 wrote:
I attach a new patch that will scan both DVB-S and DVB-S2 channels.
If anybody tries it please post back.
Unfortunately I and other vdr-user couldn't lock the dvb-s2 channels with this patch. there's new warning during of compilation
============================================= ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition scan.c: In member function ‘void cScan::ScanServices()’: scan.c:248: warning: unused variable ‘tt’ scan.c: In member function ‘void cScan::ScanDVB_S(cTransponder*, cChannel*)’: scan.c:412: warning: unused variable ‘tt’ ============================================
====================================================== May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S19.2E" May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S19.2E.tpl. bz2 --- try uncompressed =======================================================
hereafter is my steps
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# svn revert -R ./ Reverted 'channelscan.c' Reverted 'transponders.c' Reverted 'scan.c' Reverted 'filter.c' Reverted 'csmenu.c'
goga:/usr/src/VDR/PLUGINS/src/channelscan-0.6.1# svn up At revision 6236.
make clean-plugins make plugins
Plugin reelchannelscan: make[1]: Entering directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1' make[1]: Leaving directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1' make[1]: Entering directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1' g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include channelscan.c In file included from scan.h:34, from csmenu.h:42, from channelscan.c:31: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from channelscan.c:31: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include csmenu.c In file included from scan.h:34, from csmenu.h:42, from csmenu.c:43: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from ../../../include/vdr/menu.h:14, from csmenu.c:40: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include filter.c In file included from scan.h:34, from csmenu.h:42, from filter.c:35: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.h:31, from csmenu.h:42, from filter.c:35: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include i18n.c g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include scan.c In file included from scan.h:34, from csmenu.h:42, from scan.c:36: filter.h:193:1: warning: "MAXNETWORKNAME" redefined In file included from ../../../include/vdr/device.h:18, from scan.c:32: ../../../include/vdr/nit.h:16:1: warning: this is the location of the previous definition scan.c: In member function ‘void cScan::ScanServices()’: scan.c:248: warning: unused variable ‘tt’ scan.c: In member function ‘void cScan::ScanDVB_S(cTransponder*, cChannel*)’: scan.c:412: warning: unused variable ‘tt’ g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include transponders.c g++ -fPIC -O2 -Wall -Woverloaded-virtual -c -D_GNU_SOURCE -DPLUGIN_NAME_I18N='"reelchannelscan"' -DVDRDIR="../../.." -DBOOST_IOSTREAMS_NO_LIB -DNDEBUG -I../../../include -I../..//include bzip2.c g++ -fPIC -O2 -Wall -Woverloaded-virtual -lbz2 -lz -shared channelscan.o csmenu.o filter.o i18n.o scan.o transponders.o bzip2.o -o libvdr-reelchannelscan.so make[1]: Leaving directory `/usr/src/vdr-1.7.0/PLUGINS/src/channelscan-0.6.1'
I tried to make auto & manual scan
debug [scan] Stop Replay Card Number 0 SET DEBUG [scan.c] scanning_on_receiving _device TRUE DEBUG [channelscan]: loop through transponders ++++ size 1 ++++++++
DEBUG [channelscan]: loop through transponders ++++ size 1 ++++++++ DEBUG [channelscan]: scan f: 11914 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11914 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11914 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11914 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11914 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111914 mod -2147483648 fec -2147483648 ---------- --- End of transponderlist. End of scan! Duratation 12 --- Assumed HD Transponders
I use etc/vdr/plugins/transponders/S19.2E.tpl [SATTYPE] 1=S19.2E 2=Astra 1F/1G/1H/1KR/1L [Ku DVB-S2] 3=East 4=19.2
[DVB] 0=3 1=11914,H,27500,910,S2 2=12522,V,22000,23,S2 3=12581,V,22000,23,S2
BUT in syslog I can see
May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S19.2E" May 31 22:08:20 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S19.2E.tpl. bz2 --- try uncompressed May 31 22:08:20 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1 May 31 22:08:20 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0 May 31 22:08:20 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0 May 31 22:08:20 localhost last message repeated 2 times May 31 22:08:20 localhost vdr: [4645] start Scanning @ Card 0 --- May 31 22:08:20 localhost vdr: [5644] transfer thread ended (pid=4645, tid=5644) May 31 22:08:20 localhost vdr: [4645] buffer stats: 98324 (4%) used May 31 22:08:20 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 22:08:20 localhost vdr: [5655] maxmods = 3 May 31 22:08:20 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 22:08:20 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:20 localhost vdr: [5646] TS buffer on device 1 thread ended (pid=4645, tid=5646) May 31 22:08:20 localhost vdr: [5645] buffer stats: 97948 (4%) used May 31 22:08:21 localhost vdr: [5645] receiver on device 1 thread ended (pid=4645, tid=5645) May 31 22:08:22 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111914 ------------- May 31 22:08:26 localhost last message repeated 2 times May 31 22:08:26 localhost vdr: [5655] maxmods = 3 May 31 22:08:28 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 22:08:28 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:28 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111914 ------------- May 31 22:08:32 localhost last message repeated 2 times May 31 22:08:32 localhost vdr: [5655] maxmods = 3 May 31 22:08:32 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:34 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212522 ------------- May 31 22:08:38 localhost last message repeated 2 times May 31 22:08:38 localhost vdr: [5655] maxmods = 3 May 31 22:08:40 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 22:08:40 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:40 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212522 ------------- May 31 22:08:44 localhost last message repeated 2 times May 31 22:08:44 localhost vdr: [5655] maxmods = 3 May 31 22:08:44 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:46 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212581 ------------- May 31 22:08:50 localhost last message repeated 2 times May 31 22:08:50 localhost vdr: [5655] maxmods = 3 May 31 22:08:52 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 22:08:52 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 22:08:52 localhost vdr: [5655] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 212581 ------------- May 31 22:08:56 localhost last message repeated 2 times May 31 22:09:01 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 212581
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Приветствую, Vangelis
it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1 May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0 May 31 23:02:55 localhost last message repeated 2 times May 31 23:02:55 localhost vdr: [4645] start Scanning @ Card 0 --- May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535) May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6613] maxmods = 3 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537) May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536) May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:02:57 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:01 localhost last message repeated 2 times May 31 23:03:01 localhost vdr: [6613] maxmods = 3 May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:03 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:07 localhost last message repeated 2 times May 31 23:03:07 localhost vdr: [6613] maxmods = 3 May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:09 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:13 localhost last message repeated 2 times May 31 23:03:13 localhost vdr: [6613] maxmods = 3 May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:15 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:19 localhost last message repeated 2 times May 31 23:03:19 localhost vdr: [6613] maxmods = 3 May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:21 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:25 localhost last message repeated 2 times May 31 23:03:25 localhost vdr: [6613] maxmods = 3 May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:27 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:31 localhost last message repeated 2 times May 31 23:03:31 localhost vdr: [6613] maxmods = 3
May 31 23:03:37 localhost last message repeated 2 times May 31 23:03:37 localhost vdr: [6613] maxmods = 3 May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:39 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211996 ------------- May 31 23:03:43 localhost last message repeated 2 times May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996 May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
there's some strange warnings - can somebody comment their
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
Goga777
I tested it with automatic scan (dont know if manual scan works). Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up both DVB-S AND DVB-S2 channels.
I did so with my S13.0E.tpl
I haven't done any more testing with other parameters. I have Hotbird in my installation and it picked up in total 1626 services (TV+Radio). Maybe it missed a few (my satellite box gets about 2050, but this number includes data services). Moreover I dont know whether the file with the transponders for Hotbird ( (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it is missing a few transponders.
in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time for dvb-s2 tests
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
(for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)
Goga777
Hello Goga,
For transponders 11258, 11278 , 11449 I get no channels as well. But for 11996 I get: NationalGeo HD;SkyItalia:11996:VO0S1:S13.0E:27500:163:0;412=ita,413=eng:0:919,93B:11032:64511:6400:0 Next HD;SkyItalia:11996:VO0S1:S13.0E:27500:160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 SKY Cinema HD;SkyItalia:11996:VO0S1:S13.0E:27500:161:0;404=ita,405=eng:0:919,93B:11031:64511:6400:0 SKY Sport HD 1;SkyItalia:11996:VO0S1:S13.0E:27500:164:0;416=ita,417=eng:0:919,93B:11020:64511:6400:0 SKY Sport HD 2;SkyItalia:11996:VO0S1:S13.0E:27500:165:0;420=eng,421=ita:0:919,93B:11033:64511:6400:0
I also get: HBO HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:401:411=pol;412=pol:0:1803:3105:113:7800:0 HD suisse;SRG SSR idee suisse:12399:HO0S0:S13.0E:27500:180:0;131=deu,132=fra,133=ita,134=eng:0:500:990:318:8500:0 Polsat Sport HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:301:311=pol:0:1803:3101:113:7800:0
which are HD channels but DVB-S.
As far as your transponder file, what if you remove S2 from the end of the line describing the transponder? I have used the original S13.0E.tpl that I found in an old 0.4.1 package. Anyway, in my code I treat each transponder as DVB-S and DVB-S2, so try again and post back. This is my corresponding lines: 1=11258,H,27500,23 2=11278,V,27500,34 3=11449,H,27500,23 4=11996,V,27500,23
Goga777 wrote:
Приветствую, Vangelis
it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1 May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0 May 31 23:02:55 localhost last message repeated 2 times May 31 23:02:55 localhost vdr: [4645] start Scanning @ Card 0 --- May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535) May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6613] maxmods = 3 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537) May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536) May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:02:57 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:01 localhost last message repeated 2 times May 31 23:03:01 localhost vdr: [6613] maxmods = 3 May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:03 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:07 localhost last message repeated 2 times May 31 23:03:07 localhost vdr: [6613] maxmods = 3 May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:09 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:13 localhost last message repeated 2 times May 31 23:03:13 localhost vdr: [6613] maxmods = 3 May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:15 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:19 localhost last message repeated 2 times May 31 23:03:19 localhost vdr: [6613] maxmods = 3 May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:21 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:25 localhost last message repeated 2 times May 31 23:03:25 localhost vdr: [6613] maxmods = 3 May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:27 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:31 localhost last message repeated 2 times May 31 23:03:31 localhost vdr: [6613] maxmods = 3
May 31 23:03:37 localhost last message repeated 2 times May 31 23:03:37 localhost vdr: [6613] maxmods = 3 May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:39 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211996 ------------- May 31 23:03:43 localhost last message repeated 2 times May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996 May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
there's some strange warnings - can somebody comment their
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
Goga777
I tested it with automatic scan (dont know if manual scan works). Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up both DVB-S AND DVB-S2 channels.
I did so with my S13.0E.tpl
I haven't done any more testing with other parameters. I have Hotbird in my installation and it picked up in total 1626 services (TV+Radio). Maybe it missed a few (my satellite box gets about 2050, but this number includes data services). Moreover I dont know whether the file with the transponders for Hotbird ( (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it is missing a few transponders.
in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time for dvb-s2 tests
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
(for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)
Goga777
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
For transponders 11258, 11278 , 11449 I get no channels as well.
why ? (may be this dvb-s2 channel was founded by VDR-scan, not by reelchannelscan ?)
But for 11996 I get: NationalGeo HD;SkyItalia:11996:VO0S1:S13.0E:27500:163:0;412=ita,413=eng:0:919,93B:11032:64511:6400:0 Next HD;SkyItalia:11996:VO0S1:S13.0E:27500:160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 SKY Cinema HD;SkyItalia:11996:VO0S1:S13.0E:27500:161:0;404=ita,405=eng:0:919,93B:11031:64511:6400:0 SKY Sport HD 1;SkyItalia:11996:VO0S1:S13.0E:27500:164:0;416=ita,417=eng:0:919,93B:11020:64511:6400:0 SKY Sport HD 2;SkyItalia:11996:VO0S1:S13.0E:27500:165:0;420=eng,421=ita:0:919,93B:11033:64511:6400:0
I also get: HBO HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:401:411=pol;412=pol:0:1803:3105:113:7800:0 HD suisse;SRG SSR idee suisse:12399:HO0S0:S13.0E:27500:180:0;131=deu,132=fra,133=ita,134=eng:0:500:990:318:8500:0 Polsat Sport HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:301:311=pol:0:1803:3101:113:7800:0
which are HD channels but DVB-S.
dvb-s channels are not so interesting than dvb-s2 :)
As far as your transponder file, what if you remove S2 from the end of the line describing the transponder? I have used the original S13.0E.tpl that I found in an old 0.4.1 package. Anyway, in my code I treat each transponder as DVB-S and DVB-S2, so try again and post back. This is my corresponding lines: 1=11258,H,27500,23 2=11278,V,27500,34 3=11449,H,27500,23 4=11996,V,27500,23
no luck with your variant
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23 2=11278,V,27500,34 3=11449,H,27500,23 4=11996,V,27500,23
debug [scan] Stop Replay Card Number 0 SET DEBUG [scan.c] scanning_on_receiving_device TRUE DEBUG [channelscan]: loop through transponders ++++ size 4 ++++++++
DEBUG [channelscan]: loop through transponders ++++ size 4 ++++++++ DEBUG [channelscan]: scan f: 11258 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [channelscan]: scan f: 11278 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [channelscan]: scan f: 11449 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [channelscan]: scan f: 11996 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- --- End of transponderlist. End of scan! Duratation 48 --- Assumed HD Transponders
Goga
Goga777 wrote:
Приветствую, Vangelis
it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1 May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0 May 31 23:02:55 localhost last message repeated 2 times May 31 23:02:55 localhost vdr: [4645] start Scanning @ Card 0 --- May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535) May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6613] maxmods = 3 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537) May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536) May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:02:57 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:01 localhost last message repeated 2 times May 31 23:03:01 localhost vdr: [6613] maxmods = 3 May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:03 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:07 localhost last message repeated 2 times May 31 23:03:07 localhost vdr: [6613] maxmods = 3 May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:09 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:13 localhost last message repeated 2 times May 31 23:03:13 localhost vdr: [6613] maxmods = 3 May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:15 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:19 localhost last message repeated 2 times May 31 23:03:19 localhost vdr: [6613] maxmods = 3 May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:21 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:25 localhost last message repeated 2 times May 31 23:03:25 localhost vdr: [6613] maxmods = 3 May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:27 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:31 localhost last message repeated 2 times May 31 23:03:31 localhost vdr: [6613] maxmods = 3
May 31 23:03:37 localhost last message repeated 2 times May 31 23:03:37 localhost vdr: [6613] maxmods = 3 May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:39 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211996 ------------- May 31 23:03:43 localhost last message repeated 2 times May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996 May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
there's some strange warnings - can somebody comment their
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
Goga777
I tested it with automatic scan (dont know if manual scan works). Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up both DVB-S AND DVB-S2 channels.
I did so with my S13.0E.tpl
I haven't done any more testing with other parameters. I have Hotbird in my installation and it picked up in total 1626 services (TV+Radio). Maybe it missed a few (my satellite box gets about 2050, but this number includes data services). Moreover I dont know whether the file with the transponders for Hotbird ( (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it is missing a few transponders.
in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time for dvb-s2 tests
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
(for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)
No, the channels I mention are found by reelchannelscan. Are you sure the other transponders have contents? Because, neither my box receiver can get anything there...... But, I can not see Eurosport HD in my installation....., maybe I dont get all Hotbird's beams, I dont know....
Anyway, it is strange you get nothing from reelchannelscan...... I get about 1600 servicess. Using my previous patch (which worked only for DVB-S) did you get any channels?
If you scan all of Hotbirds transponders (having removed the S2 at the end of the line and with default settings) how many channels do you get?
Thanks Vagelis
Goga777 wrote:
For transponders 11258, 11278 , 11449 I get no channels as well.
why ? (may be this dvb-s2 channel was founded by VDR-scan, not by reelchannelscan ?)
But for 11996 I get: NationalGeo HD;SkyItalia:11996:VO0S1:S13.0E:27500:163:0;412=ita,413=eng:0:919,93B:11032:64511:6400:0 Next HD;SkyItalia:11996:VO0S1:S13.0E:27500:160:0;400=ita,401=eng:0:919,93B:11030:64511:6400:0 SKY Cinema HD;SkyItalia:11996:VO0S1:S13.0E:27500:161:0;404=ita,405=eng:0:919,93B:11031:64511:6400:0 SKY Sport HD 1;SkyItalia:11996:VO0S1:S13.0E:27500:164:0;416=ita,417=eng:0:919,93B:11020:64511:6400:0 SKY Sport HD 2;SkyItalia:11996:VO0S1:S13.0E:27500:165:0;420=eng,421=ita:0:919,93B:11033:64511:6400:0
I also get: HBO HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:401:411=pol;412=pol:0:1803:3105:113:7800:0 HD suisse;SRG SSR idee suisse:12399:HO0S0:S13.0E:27500:180:0;131=deu,132=fra,133=ita,134=eng:0:500:990:318:8500:0 Polsat Sport HD test;Cyfrowy Polsat S.A.:12265:VO0S0:S13.0E:27500:301:311=pol:0:1803:3101:113:7800:0
which are HD channels but DVB-S.
dvb-s channels are not so interesting than dvb-s2 :)
As far as your transponder file, what if you remove S2 from the end of the line describing the transponder? I have used the original S13.0E.tpl that I found in an old 0.4.1 package. Anyway, in my code I treat each transponder as DVB-S and DVB-S2, so try again and post back. This is my corresponding lines: 1=11258,H,27500,23 2=11278,V,27500,34 3=11449,H,27500,23 4=11996,V,27500,23
no luck with your variant
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23 2=11278,V,27500,34 3=11449,H,27500,23 4=11996,V,27500,23
debug [scan] Stop Replay Card Number 0 SET DEBUG [scan.c] scanning_on_receiving_device TRUE DEBUG [channelscan]: loop through transponders ++++ size 4 ++++++++
DEBUG [channelscan]: loop through transponders ++++ size 4 ++++++++ DEBUG [channelscan]: scan f: 11258 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11258 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11258 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11258 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11258 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111258 mod -2147483648 fec -2147483648 ---------- DEBUG [channelscan]: scan f: 11278 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11278 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11278 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11278 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11278 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211278 mod -2147483648 fec -2147483648 ---------- DEBUG [channelscan]: scan f: 11449 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11449 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11449 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11449 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11449 pol: H srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 111449 mod -2147483648 fec -2147483648 ---------- DEBUG [channelscan]: scan f: 11996 DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500 mod: 0 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [cs]: ScanDVB_S2 DEBUG [DVB_S]; trying QPSK: freq: 11996 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying PSK8: freq: 11996 srate:27500 mod: 8 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- DEBUG [DVB_S]; trying QPSK_S2: freq: 11996 srate:27500 mod: 4 44m DEBUG [DVB_S] - channel: freq: 11996 pol: V srate:27500 mod: -2147483648 debug [scan] -- NO LOCK @ transponder 211996 mod -2147483648 fec -2147483648 ---------- --- End of transponderlist. End of scan! Duratation 48 --- Assumed HD Transponders
Goga
Goga777 wrote:
Приветствую, Vangelis
it's my /etc/vdr/plugins/transponders/S13.0E.tpl (only dvb-s2 transponders)
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
I have tested in Auto mode - and without any LOCK on dvb-s2 channels :(
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) freq=1 scanMode=1 May 31 23:02:55 localhost vdr: [4645] virtual eOSState cMenuChannelscan::ProcessKey(eKeys) ssGetChannels?=0 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=0 May 31 23:02:55 localhost last message repeated 2 times May 31 23:02:55 localhost vdr: [4645] start Scanning @ Card 0 --- May 31 23:02:55 localhost vdr: [6535] transfer thread ended (pid=4645, tid=6535) May 31 23:02:55 localhost vdr: [4645] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6613] maxmods = 3 May 31 23:02:55 localhost vdr: [4645] cMenuScanActive::cMenuScanActive(cScanParameters*) ssGetChannels?=1 May 31 23:02:55 localhost vdr: [6537] TS buffer on device 1 thread ended (pid=4645, tid=6537) May 31 23:02:55 localhost vdr: [6536] buffer stats: 0 (0%) used May 31 23:02:55 localhost vdr: [6536] receiver on device 1 thread ended (pid=4645, tid=6536) May 31 23:02:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:02:57 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:01 localhost last message repeated 2 times May 31 23:03:01 localhost vdr: [6613] maxmods = 3 May 31 23:03:02 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:02 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:03 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111258 ------------- May 31 23:03:07 localhost last message repeated 2 times May 31 23:03:07 localhost vdr: [6613] maxmods = 3 May 31 23:03:07 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:09 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:13 localhost last message repeated 2 times May 31 23:03:13 localhost vdr: [6613] maxmods = 3 May 31 23:03:15 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:15 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:15 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211278 ------------- May 31 23:03:19 localhost last message repeated 2 times May 31 23:03:19 localhost vdr: [6613] maxmods = 3 May 31 23:03:19 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:21 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:25 localhost last message repeated 2 times May 31 23:03:25 localhost vdr: [6613] maxmods = 3 May 31 23:03:27 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:27 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:27 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 111449 ------------- May 31 23:03:31 localhost last message repeated 2 times May 31 23:03:31 localhost vdr: [6613] maxmods = 3
May 31 23:03:37 localhost last message repeated 2 times May 31 23:03:37 localhost vdr: [6613] maxmods = 3 May 31 23:03:39 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:39 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:39 localhost vdr: [6613] debug [channelscan] ------ NO LOCK after 2000ms @ transponder 211996 ------------- May 31 23:03:43 localhost last message repeated 2 times May 31 23:03:48 localhost vdr: [4654] frontend 0 timed out while tuning to channel 0, tp 211996 May 31 23:03:48 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:48 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2 May 31 23:03:57 localhost vdr: [4654] ERROR (dvbdevice.c,302): Invalid argument May 31 23:03:57 localhost kernel: dvb_frontend_ioctl: FESTATE_RETUNE: fepriv->state=2
there's some strange warnings - can somebody comment their
May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] INFO [channelscan]: Please update Transponder lists May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] in : no values for "S13.0E" May 31 23:02:55 localhost vdr: [4645] ERROR: [channelscan] can`t open LoadSatTpls /etc/vdr//plugins/transponders/S13.0E.tpl. bz2 --- try uncompressed
Goga777
I tested it with automatic scan (dont know if manual scan works). Moreover, I had selected TV+Radio (not HDTV) and the scanner pick up both DVB-S AND DVB-S2 channels.
I did so with my S13.0E.tpl
I haven't done any more testing with other parameters. I have Hotbird in my installation and it picked up in total 1626 services (TV+Radio). Maybe it missed a few (my satellite box gets about 2050, but this number includes data services). Moreover I dont know whether the file with the transponders for Hotbird ( (vdr-video-dir)/plugins/transponders/S13.0E.tpl ) is updated (maybe it is missing a few transponders.
in attachment you can find updated S13.0E.tpl , but let's test with dvb-s2 version of this file - it can save our time for dvb-s2 tests
[SATTYPE] 1=S13.0E 2=Hot Bird 6/7A/8 [Ku DVB-S2] 3=East 4=13.0
[DVB] 0=4 1=11258,H,27500,23,S2 2=11278,V,27500,23,S2 3=11449,H,27500,23,S2 4=11996,V,27500,23,S2
(for your information - I can see the open EurosportHD on 13E , and I have the hvr4000 dvb-s2 card)
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Приветствую, Vangelis
No, the channels I mention are found by reelchannelscan. Are you sure the other transponders have contents?
I suppose so - these transponders have content now
Because, neither my box receiver can get anything there...... But, I can not see Eurosport HD in my installation....., maybe I dont get all Hotbird's beams, I dont know....
maybe
Anyway, it is strange you get nothing from reelchannelscan......
I can scan dvb-s channels with reelchannelscan without any problem. Only dvb-s2 channel I couldn't find by reelchannelscan.
I get about 1600 servicess. Using my previous patch (which worked only for DVB-S) did you get any channels?
If you scan all of Hotbirds transponders (having removed the S2 at the end of the line and with default settings) how many channels do you get?
TV - 1321 Radio - 327
Igor
Hi
seems to me the patched reelchannelscan can't scan the DVB-S2 channels. Can somebody to implement in reelchannelscan the multiproto api support for it ?
Goga777
On Mon, May 26, 2008 at 12:17 PM, Mike Booth mike_booth76@iprimus.com.au wrote:
works fine for me except that at the end of a scan it returns to channel 1 and not the last channel ( pain in the arse)
Hope this patch remedies your problem.
============== --- csmenu.c (revision 6186) +++ csmenu.c (working copy) @@ -483,7 +483,7 @@ cMenuChannelscan::ProcessKey(eKeys Key) {
- if (cMenuChannelscan::scanState == ssInterrupted ) + if (cMenuChannelscan::scanState >= ssInterrupted ) { // get back to the channel that was being played, not to channel #1 if Interrupted Channels.SwitchTo(::Setup.CurrentChannel); ===============
-
Goga777 -
Mike Booth -
sundararaj reel -
Vangelis Nonas