Hello,
I have actually vdr 1.2.6 with a nexus-s and mediaguard cam-ci for canal+ working very well.
I'd to add a new CI device for tps, what is the protocol to do this ? Is there some one who have this on his box ?
Thanks.
Nicolas.
tarass@club-internet.fr writes:
I'd to add a new CI device for tps, what is the protocol to do this ? Is there some one who have this on his box ?
Works is on-going to get TPS with Twinhan/ Hercules card.
Currently I can de-scramble TPS with an SCM Viaccess card. But de-scrambling always stop after some time (between 30mn and 4 hours). Manu Abraham and I still have to figure out why.
Then, some adaptation will be needed in vdr to use Twinhan CI. Details are still not figured out.
If you're in a hurry, you might want to try another type of HW.
HTH
Le 03/14/2005 01:52 PM, Manu Abraham a joliment écrit :
The nexus-s is connected to a cam by large wire. One can plug two ci modules (pcmcia card) in this cam to descramble crypted channels. I plugged in an aston mediaguard ci-modules to descramble canal+ channels on astra (work fine), and I manage to connect an tps (hotbird) compliant ci-module to descramble tps channels.
I'd like to know what ci-module is compatible withe nexus cam for tps use ? and if there is any driver, patch to apply ?
I surch around and I did'nt find precise stuff.
Thanks.
Nicolas.
tarass@club-internet.fr wrote:
CI module compatible with a CAM ?
Or do you mean CI based card compatible with the Nexus CI module ?
I surch around and I did'nt find precise stuff.
But why do you need to create another /dev/dvb/caXX ?
Currently with some experimental stuff, TPS is working with Viaccess on a Twinhan VP-1030 under Linux as per my knowledge.
Manu
Le 03/14/2005 02:56 PM, Manu Abraham a joliment écrit :
CI module compatible with a CAM ?
Or do you mean CI based card compatible with the Nexus CI module ?
Sorry I mismatch CAM and CI, I want to know what CAM I must use with the nexus-s for TPS and how to install it. I read that for exemple red viaccess pcmcia module (CAM) is not compatible with the hauppauge nexus-s ...
Nicolas.
On Monday 14 March 2005 15:50, Manu Abraham wrote:
http://www.linuxtv.org/wiki/index.php/Supported_CAM_modules
Says:
Technotrend/Hauppauge fullfeatured cards So far, all CAM modules are supported by these cards
Kenneth
Le 03/14/2005 04:03 PM, Kenneth Aafløy a joliment écrit :
Good to know, because some stores specifies that the red viaccess ci is not compatible with hauppauge ans some other cards ...
http://www.bctech.fr/satellite/satmod1.html
Has anybody here a nexus-s with red-viaccess ci working ?
Nicolas.
Le 03/14/2005 04:47 PM, Manu Abraham a joliment écrit :
The site says Viaccess Red does not work with a Hercules also. Which i don't think is very much correct..
I agree with you and I distrust this site's infos as they say that the aston mediaguard module is not compatible with the nexus but it works at home. But I prefer to ask befor to buy ;-)
Thanks.
Nicolas.
Le 03/14/2005 02:56 PM, Manu Abraham a joliment écrit :
Currently with some experimental stuff, TPS is working with Viaccess on a Twinhan VP-1030 under Linux as per my knowledge.
Do you have more information on that ? I am maybe interested in a secondary budget card.
Thnaks.
Nicolas.
On Monday 14 March 2005 17:17, tarass@club-internet.fr wrote:
There is nothing on that page that says that an aston cam is incompatible with any of the cards listed there. Where do you see this?
Besides, the Nexus-S is a fullfeatured card, and so the following line is valid:
So far, all CAM modules are supported by this card
If you can confirm that a CAM is incompatible with the Nexus-S or another fullfeatured Technotrend/Hauppauge card, feel free to edit the list.
Kenneth
Le 03/14/2005 06:07 PM, Kenneth Aafløy a joliment écrit :
On this link : http://www.bctech.fr/satellite/satmod1.html
MODULE PCMCIA VIACCESS ATTENTION Ne fonctionne pas avec Hauppauge,Hercule et Pinnacle
Means Warning, doesn't work with Hauppauge,Hercule et Pinnacle.
I can't confirm that is true, but I ask before to buy.
I can confirm that the same warning for MODULE PCMCIA MEDIAGUARD version 1.05 is an error, because it's working on my box since more than a year.
As there is people that confirm nexus-s and red viacess work together, I'll wonder if those people could tell me something about the installation of the ci (driver ... ). I'am running vdr 1.2.6.
Thanks.
Nicolas.
tarass@club-internet.fr wrote:
As i said, it is a bit experimental at the moment, but to get a sneak preview, you can take a look at the twinhan-exp branch at linuxtv.org.
cvs -z3 -d :pserver:anonymous@cvs.linuxtv.org:/cvs/linuxtv co -rtwinhan-exp
You can have a sneak preview of the documentation too. linux/Documentation/dvb/ci.txt
Manu
On Mon, Mar 14, 2005 at 04:45:16PM +0100, tarass@club-internet.fr wrote:
Has anybody here a nexus-s with red-viaccess ci working ?
Don't know about the -S version but I have a Technotrend DVB-C 2.1 FF card that works just fine with Viaccess Red. A friend of mine has a Technotrend C2300 (reportedly identical to the Nexus-CA) running under Windows with a Viaccess Red. I don't think he has tried it with Linux, though.
All in all: it is incorrect to say that Viaccess Red doesn't work with Hauppauge/Technotrend cards. I don't know if it applies to all types of cards but at least it works with the cable versions...
/Klaus (using VDR 1.3.21)
Manu Abraham manu@kromtek.com writes:
AFAIK, the Viaccess Red is the only module for TPS.
Aston also provide CAM compatible with TPS.
Cheers
-
Dominique Dumont -
Kenneth Aafløy -
Klaus Ellegaard -
Manu Abraham -
tarass＠club-internet.fr