Hi Igor,
Small question. I tried your patch, but it fails a hunk in dvbdevice.c. I added this hunk manually but I think something is missing:
Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument
Those both lines has the following code:
CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone));
The result is, no tuning and no picture.
And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing that also).
Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :)
Regards,
Niels Wagenaar
-----Oorspronkelijk bericht----- Van: Igor M. Liplianin [mailto:liplianin@tut.by] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; linux-dvb@linuxtv.org Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?):
Hello all (and especially Klaus):
It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very
rapidly.
Only the devices currently in Multiproto and written by Manu Abraham
are not yet ported.
Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist).
So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing
it
myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;)
Regards,
Niels Wagenaar
Hi Niels
S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish.
Igor
В сообщении от 28 September 2008 17:12:14 Niels Wagenaar написал(а):
Hi Igor,
Small question. I tried your patch, but it fails a hunk in dvbdevice.c. I added this hunk manually but I think something is missing:
Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument
Those both lines has the following code:
CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone));
The result is, no tuning and no picture.
And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing that also).
Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :)
Regards,
Niels Wagenaar
-----Oorspronkelijk bericht----- Van: Igor M. Liplianin [mailto:liplianin@tut.by] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; linux-dvb@linuxtv.org Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?):
Hello all (and especially Klaus):
It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very
rapidly.
Only the devices currently in Multiproto and written by Manu Abraham
are not yet ported.
Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist).
So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing
it
myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;)
Regards,
Niels Wagenaar
Hi Niels
S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish.
Igor
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
V.2 Only satellite, as I have not any cable or terrestrial, but it is easy to modify :-) I test it with cx24116 based card (though without ISL chip) and didn't find any troubles.
Igor
Hi,
I'm on Astra 19.2 and tested the following HD transponders : Anixe HD Arte HD Astra HD+
first test results :
Arte HD tunes ok and plays fine.
On Astra HD+ and Anixe HD im getting an error :
Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() FE_SET_PROPERTY Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.num = 8 Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.props = 0000000041b31dc0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000011 (DTV_DELIVERY_SYSTEM) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000005 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000003 (DTV_FREQUENCY) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00140cd0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000004 (DTV_MODULATION) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000008 (DTV_SYMBOL_RATE) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x01a39de0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000009 (DTV_INNER_FEC) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x0000000b Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000006 (DTV_INVERSION) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x0000000d (DTV_ROLLOFF) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000001 (DTV_TUNE) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 Sep 28 23:27:28 archvdr dtv_property_process_set() Finalised property cache Sep 28 23:27:28 archvdr dtv_property_cache_submit() Sep 28 23:27:28 archvdr dtv_property_cache_submit() adv, modulation = 0 Sep 28 23:27:28 archvdr dtv_property_adv_params_sync() Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() Property cache is full, tuning
If you need further informations let me know.
cu
Edgar (gimli) Hucek
÷ ÓÏÏÂÝÅÎÉÉ ÏÔ 28 September 2008 17:12:14 Niels Wagenaar ÎÁÐÉÓÁÌ(Á):
Hi Igor,
Small question. I tried your patch, but it fails a hunk in dvbdevice.c. I added this hunk manually but I think something is missing:
Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument
Those both lines has the following code:
CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone));
The result is, no tuning and no picture.
And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing that also).
Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :)
Regards,
Niels Wagenaar
-----Oorspronkelijk bericht----- Van: Igor M. Liplianin [mailto:liplianin@tut.by] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; linux-dvb@linuxtv.org Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?):
Hello all (and especially Klaus):
It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very
rapidly.
Only the devices currently in Multiproto and written by Manu Abraham
are not yet ported.
Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist).
So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing
it
myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;)
Regards,
Niels Wagenaar
Hi Niels
S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish.
Igor
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
V.2 Only satellite, as I have not any cable or terrestrial, but it is easy to modify :-) I test it with cx24116 based card (though without ISL chip) and didn't find any troubles.
Igor _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
В сообщении от 29 September 2008 00:29:17 gimli написал(а):
Hi,
I'm on Astra 19.2 and tested the following HD transponders : Anixe HD Arte HD Astra HD+
first test results :
Arte HD tunes ok and plays fine.
On Astra HD+ and Anixe HD im getting an error :
Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() FE_SET_PROPERTY Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.num = 8 Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.props = 0000000041b31dc0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000011 (DTV_DELIVERY_SYSTEM) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000005 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000003 (DTV_FREQUENCY) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00140cd0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000004 (DTV_MODULATION) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000008 (DTV_SYMBOL_RATE) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x01a39de0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000009 (DTV_INNER_FEC) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x0000000b Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000006 (DTV_INVERSION) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x0000000d (DTV_ROLLOFF) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000001 (DTV_TUNE) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 Sep 28 23:27:28 archvdr dtv_property_process_set() Finalised property cache Sep 28 23:27:28 archvdr dtv_property_cache_submit() Sep 28 23:27:28 archvdr dtv_property_cache_submit() adv, modulation = 0 Sep 28 23:27:28 archvdr dtv_property_adv_params_sync() Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() Property cache is full, tuning
If you need further informations let me know.
cu
Edgar (gimli) Hucek
В сообщении от 28 September 2008 17:12:14 Niels Wagenaar написал(а):
Hi Igor,
Small question. I tried your patch, but it fails a hunk in dvbdevice.c. I added this hunk manually but I think something is missing:
Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument
Those both lines has the following code:
CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone));
The result is, no tuning and no picture.
And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing that also).
Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :)
Regards,
Niels Wagenaar
-----Oorspronkelijk bericht----- Van: Igor M. Liplianin [mailto:liplianin@tut.by] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; linux-dvb@linuxtv.org Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?):
Hello all (and especially Klaus):
It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very
rapidly.
Only the devices currently in Multiproto and written by Manu Abraham
are not yet ported.
Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist).
So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing
it
myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;)
Regards,
Niels Wagenaar
Hi Niels
S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish.
Igor
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
V.2 Only satellite, as I have not any cable or terrestrial, but it is easy to modify :-) I test it with cx24116 based card (though without ISL chip) and didn't find any troubles.
Igor _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
BTW, did you put actual(ones from your actual repository, from wich drivers was compiled, for example s2/linux/include/linux/dvb) dvb headers in /usr/include/linux/dvb from before compiling VDR ? You can see on http://linuxtv.org/hg/~stoth/s2 that headers was changed 25 Sep
÷ ÓÏÏÂÝÅÎÉÉ ÏÔ 29 September 2008 00:29:17 gimli ÎÁÐÉÓÁÌ(Á):
Hi,
I'm on Astra 19.2 and tested the following HD transponders : Anixe HD Arte HD Astra HD+
first test results :
Arte HD tunes ok and plays fine.
On Astra HD+ and Anixe HD im getting an error :
Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() FE_SET_PROPERTY Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.num = 8 Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() properties.props = 0000000041b31dc0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000011 (DTV_DELIVERY_SYSTEM) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000005 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000003 (DTV_FREQUENCY) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00140cd0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000004 (DTV_MODULATION) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000008 (DTV_SYMBOL_RATE) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x01a39de0 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000009 (DTV_INNER_FEC) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x0000000b Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000006 (DTV_INVERSION) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x0000000d (DTV_ROLLOFF) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000002 Sep 28 23:27:28 archvdr dtv_property_process_set() Sep 28 23:27:28 archvdr dtv_property_dump() tvp.cmd = 0x00000001 (DTV_TUNE) Sep 28 23:27:28 archvdr dtv_property_dump() tvp.u.data = 0x00000000 Sep 28 23:27:28 archvdr dtv_property_process_set() Finalised property cache Sep 28 23:27:28 archvdr dtv_property_cache_submit() Sep 28 23:27:28 archvdr dtv_property_cache_submit() adv, modulation = 0 Sep 28 23:27:28 archvdr dtv_property_adv_params_sync() Sep 28 23:27:28 archvdr dvb_frontend_ioctl_properties() Property cache is full, tuning
If you need further informations let me know.
cu
Edgar (gimli) Hucek
÷ ÓÏÏÂÝÅÎÉÉ ÏÔ 28 September 2008 17:12:14 Niels Wagenaar ÎÁÐÉÓÁÌ(Á):
Hi Igor,
Small question. I tried your patch, but it fails a hunk in
dvbdevice.c.
I added this hunk manually but I think something is missing:
Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation
not
supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument
Those both lines has the following code:
CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone));
The result is, no tuning and no picture.
And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing
that
also).
Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :)
Regards,
Niels Wagenaar
-----Oorspronkelijk bericht----- Van: Igor M. Liplianin [mailto:liplianin@tut.by] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; linux-dvb@linuxtv.org Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar
???????(?):
Hello all (and especially Klaus):
It's official, the people from V4L have voted for the usage of
the
S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are
added
very
rapidly.
Only the devices currently in Multiproto and written by Manu
Abraham
are not yet ported.
Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post
on
the linux-dvb mailinglist).
So, this should mean that VDR 1.7.x should focus on S2API because
of
the obvious reasons. Has anybody started on a patch of somekind
to
include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of
doing
it
myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would
like
to use my time for something else ;)
Regards,
Niels Wagenaar
Hi Niels
S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish.
Igor
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
V.2 Only satellite, as I have not any cable or terrestrial, but it is easy
to
modify :-) I test it with cx24116 based card (though without ISL chip) and didn't find any troubles.
Igor _______________________________________________ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
BTW, did you put actual(ones from your actual repository, from wich drivers was compiled, for example s2/linux/include/linux/dvb) dvb headers in /usr/include/linux/dvb from before compiling VDR ? You can see on http://linuxtv.org/hg/~stoth/s2 that headers was changed 25 Sep
-- Igor M. Liplianin
Against this repo http://linuxtv.org/hg/~stoth/s2 i compiled VDR.
cu
Edgar (gimli) Hucek
В сообщении от 28 September 2008 22:33:56 Igor M. Liplianin написал(а):
В сообщении от 28 September 2008 17:12:14 Niels Wagenaar написал(а):
Hi Igor,
Small question. I tried your patch, but it fails a hunk in dvbdevice.c. I added this hunk manually but I think something is missing:
Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument
Those both lines has the following code:
CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone));
The result is, no tuning and no picture.
And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing that also).
Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :)
Regards,
Niels Wagenaar
-----Oorspronkelijk bericht----- Van: Igor M. Liplianin [mailto:liplianin@tut.by] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; linux-dvb@linuxtv.org Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
? ????????? ?? 24 September 2008 18:34:01 Niels Wagenaar ???????(?):
Hello all (and especially Klaus):
It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very
rapidly.
Only the devices currently in Multiproto and written by Manu Abraham
are not yet ported.
Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist).
So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing
it
myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;)
Regards,
Niels Wagenaar
Hi Niels
S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish.
Igor
vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
V.2 Only satellite, as I have not any cable or terrestrial, but it is easy to modify :-) I test it with cx24116 based card (though without ISL chip) and didn't find any troubles.
Igor
Next version: vdr-1.7.0-s2-30092008.patch
-
gimli -
Igor M. Liplianin -
Niels Wagenaar