I vwant to use a diseqc 1.2 compatible positioner with vdr. Until now I found only data about using diseqc switches . I already have some positions in the positioner memory and I want only to select a sattelite not some fancy things like searching position from the vdr IR remote or storing. I need some documentation adout diseqc1.2 and vdr implementation of standard.
Thanks
On Wednesday 28 December 2005 09:38, Paul Lacatus wrote:
I vwant to use a diseqc 1.2 compatible positioner with vdr. Until now I found only data about using diseqc switches . I already have some positions in the positioner memory and I want only to select a sattelite not some fancy things like searching position from the vdr IR remote or storing. I need some documentation adout diseqc1.2 and vdr implementation of standard.
Thanks
hi,
diseqc specifications are available at Eutelsat homepage http://www.eutelsat.com/satellites/4_5_5.html
should help you.
regards marcel
On 12/28/05, Mws mws@twisted-brains.org wrote:
On Wednesday 28 December 2005 09:38, Paul Lacatus wrote:
I vwant to use a diseqc 1.2 compatible positioner with vdr. Until now I found only data about using diseqc switches . I already have some
positions
in the positioner memory and I want only to select a sattelite not some fancy things like searching position from the vdr IR remote or
storing. I
need some documentation adout diseqc1.2 and vdr implementation of
standard.
Thanks
hi,
diseqc specifications are available at Eutelsat homepage http://www.eutelsat.com/satellites/4_5_5.html
Got them . I have modified in my diseqc.conf file according the documentation . My lines fo astra wich is memorized in positioner memory at 19 ( 13 for 13,0E , 5 for 5,0E etc) position are :
S19.2E 11700 V 9750 t v W15 [E0 30 6B 13] W15 A W15 t S19.2E 99999 V 10600 t v W15 [E0 30 6B 13] W15 A W15 T S19.2E 11700 H 9750 t V W15 [E0 30 6B 13] W15 A W15 t S19.2E 99999 H 10600 t V W15 [E0 30 6B 13] W15 A W15 T
S13.0E 11700 V 9750 t v W15 [E0 30 6B 0C] W15 A W15 t S13.0E 99999 V 10600 t v W15 [E0 30 6B 0C] W15 A W15 T S13.0E 11700 H 9750 t V W15 [E0 30 6B 0C] W15 A W15 t S13.0E 99999 H 10600 t V W15 [E0 30 6B 0C] W15 A W15 T
But any movement of the positioner occured.
Where am I wrong ?
Paul Lacatus wrote:
Got them . I have modified in my diseqc.conf file according the
documentation . My lines fo astra wich is memorized in positioner memory at 19 ( 13 > for 13,0E , 5 for 5,0E etc) position are :
S19.2E 11700 V 9750 t v W15 [E0 30 6B 13] W15 A W15 t S19.2E 99999 V 10600 t v W15 [E0 30 6B 13] W15 A W15 T S19.2E 11700 H 9750 t V W15 [E0 30 6B 13] W15 A W15 t S19.2E 99999 H 10600 t V W15 [E0 30 6B 13] W15 A W15 T
S13.0E 11700 V 9750 t v W15 [E0 30 6B 0C] W15 A W15 t S13.0E 99999 V 10600 t v W15 [E0 30 6B 0C] W15 A W15 T S13.0E 11700 H 9750 t V W15 [E0 30 6B 0C] W15 A W15 t S13.0E 99999 H 10600 t V W15 [E0 30 6B 0C] W15 A W15 T
But any movement of the positioner occured.
Where am I wrong ?
Try 31 instead of 30:
S19.2E 11700 V 9750 t v W15 [E0 31 6B 13] W15 t S19.2E 99999 V 10600 t v W15 [E0 31 6B 13] W15 T S19.2E 11700 H 9750 t V W15 [E0 31 6B 13] W15 t S19.2E 99999 H 10600 t V W15 [E0 31 6B 13] W15 T
S13.0E 11700 V 9750 t v W15 [E0 31 6B 0C] W15 t S13.0E 99999 V 10600 t v W15 [E0 31 6B 0C] W15 T S13.0E 11700 H 9750 t V W15 [E0 31 6B 0C] W15 t S13.0E 99999 H 10600 t V W15 [E0 31 6B 0C] W15 T
Greetings, Thomas
On 12/28/05, Thomas Bergwinkl Bergwinkl.Thomas@vr-web.de wrote:
Try 31 instead of 30:
S19.2E 11700 V 9750 t v W15 [E0 31 6B 13] W15 t S19.2E 99999 V 10600 t v W15 [E0 31 6B 13] W15 T S19.2E 11700 H 9750 t V W15 [E0 31 6B 13] W15 t S19.2E 99999 H 10600 t V W15 [E0 31 6B 13] W15 T
S13.0E 11700 V 9750 t v W15 [E0 31 6B 0C] W15 t S13.0E 99999 V 10600 t v W15 [E0 31 6B 0C] W15 T S13.0E 11700 H 9750 t V W15 [E0 31 6B 0C] W15 t S13.0E 99999 H 10600 t V W15 [E0 31 6B 0C] W15 T
Thanks, is working now ! Then my positioner does not accept wildcards.
Regards Paul
Am Mittwoch, 28. Dezember 2005 14:52 schrieb Paul Lacatus:
Got them . I have modified in my diseqc.conf file according the documentation . My lines fo astra wich is memorized in positioner memory at 19 ( 13 for 13,0E , 5 for 5,0E etc) position are :
S19.2E 11700 V 9750 t v W15 [E0 30 6B 13] W15 A W15 t S19.2E 99999 V 10600 t v W15 [E0 30 6B 13] W15 A W15 T S19.2E 11700 H 9750 t V W15 [E0 30 6B 13] W15 A W15 t S19.2E 99999 H 10600 t V W15 [E0 30 6B 13] W15 A W15 T
S13.0E 11700 V 9750 t v W15 [E0 30 6B 0C] W15 A W15 t S13.0E 99999 V 10600 t v W15 [E0 30 6B 0C] W15 A W15 T S13.0E 11700 H 9750 t V W15 [E0 30 6B 0C] W15 A W15 t S13.0E 99999 H 10600 t V W15 [E0 30 6B 0C] W15 A W15 T
But any movement of the positioner occured.
Where am I wrong ?
13 dez is 0D in hex
-
Mws -
Paul Lacatus -
Thomas Bergwinkl -
Uwe Hanke