vdr October 2005

vdr@linuxtv.org

152 participants
172 discussions

VDR install issue
by cardboil 08 Oct '05

08 Oct '05

Hello: I am running FC4 with DVB-s card installed and working correctly. Now, I'm trying to install VDR following the instructions on http://www.linuxtv.org/vdrwiki/index.php/VDR_installation. First, I installed JPEG as instructed. When I do a make for VDR, I get a bunch of Woverloaded messages followed by this error: make: *** No rule to make target `jpeglib.h', needed by `dvbdevice.o'. Stop. My DVB drivers are installed under /usr/src/kernels/2.6.13- 1.1526_FC4-i686/drivers/media/dvb. The DVB node is /dev/dvb/adapter0. Any help would be appreciated. Than you.

4 3

2 cards
by Paul cDobson 07 Oct '05

07 Oct '05

I have installed 2 DVB cards, 1 DVB-s & 1 DVB-c. Both cards have a lot of common channels that they both receive. I can currently view & record these channels now, but I effectively have all channels listed twice, once for the cable card & once for the sat card. Can the channel data be combined in some way so that there is 1 channel name with both the cable & sat settings. This way I would only see the channel listed once & if the cable card was being used to record I could still view a different channel & VDR could determine which card to use. Many thanks Paul

2 1

Updating menu items from separate thread
by Tobias Grimm 07 Oct '05

07 Oct '05

Hi! I have a simple menu derived from cOsdMenu which displays selectable cOsdItem's. Now I want to update the text of the cOsdItem's from a separate thread, which I do basically this way: cOsdItem* item = Get(index); if (item) { item->SetText(text); Display(); } But this doesn't seem to work very well. Sometimes only some of the cOsdItems are correctly shown with the new text, sometimes parts of the menu are completly invisible until I move the selection cursor over this area. Any suggestions? Maybe this isn't possible at all? Regards, Tobias

2 3

vdr-1.3.34, streamdev-cvs, server crash upon epg scan from client
by Stefan Lucke 07 Oct '05

07 Oct '05

Hi, does anyone gets the same crash ? Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 98311 (LWP 2583)] cLSTEHandler::Next(bool&) (this=0x87b6fd8, Last=@0x0) at channels.h:149 149 const char *Name(void) const { return name; } Current language: auto; currently c++ (gdb) bt #0 cLSTEHandler::Next(bool&) (this=0x87b6fd8, Last=@0x0) at channels.h:149 #1 0x40801a29 in bool cConnectionVTP::CmdLSTX<cLSTEHandler>(cLSTEHandler*&, char*) (this=0x88548b0, Handler=@0x8859960, Option=0x88548fe "") at server/connectionVTP.c:799 #2 0x408010ba in cConnectionVTP::CmdLSTE(char*) (this=0x0, Option=0x88548fe "") at server/connectionVTP.c:808 #3 0x408004ec in cConnectionVTP::Command(char*) (this=0x88548b0, Cmd=0x88548fa "LSTE") at server/connectionVTP.c:551 #4 0x4080552f in cServerConnection::Read() (this=0x88548b0) at server/connection.c:55 #5 0x407fdf6b in cStreamdevServer::Action() (this=0x84f9290) at server/server.c:127 #6 0x080f539e in cThread::StartThread(cThread*) (Thread=0x84f9290) at thread.c:234 #7 0x4005af60 in pthread_start_thread () from /lib/i686/libpthread.so.0 #8 0x4005b0fe in pthread_start_thread_event () from /lib/i686/libpthread.so.0 #9 0x40271327 in clone () from /lib/i686/libc.so.6 Is there another way to get the epg from server to the client ? -- Stefan Lucke

1 1

Different languaghes on right/left channel
by anders＠sandell.net 07 Oct '05

07 Oct '05

Hi all, I have noticed that some channels (at least Eurosport and Nickelodeon on CanalDigital, S1W) broadcast different languaghes on right/left channel. Eurosport for instance has two audio PID's where one is English/Danish and the other one is Swedish/Norwegian. Is it possible to select channel through VDR audio menu but VDR doesnt remeber the selection so everytime i select Eurosport i have to select swedish manually. (and my daughter gets confused with mixed language on Nickelodeon...) Is this the expected behaviour or have I overlooked something in the configuration?? Kind regards, Anders

4 5

[ANNOUNCE] LoadEPG version 0.1.6
by lukkinosat 07 Oct '05

07 Oct '05

2005-10-05: Version 0.1.6 - Improved the source code for better preformances - Add Finnish translation (by Rolf Ahrenberg) - Add provider Canal Digital on S1W satellite (by Rolf Ahrenberg) ___________________________________ Yahoo! Messenger: chiamate gratuite in tutto il mondo http://it.messenger.yahoo.com

6 7

RE: [vdr] Plugin cDevice audio switch handling
by Zierath, Bernd (EBV) 07 Oct '05

07 Oct '05

Hi, >What about > > virtual void SetAudioChannelDevice(int AudioChannel); > >(And why the second posting in HTML?) > >Klaus Maybe I'm doing something wrong the method is there and I see in the the debug log the SetAudioChannelDevice(0) after switching the channel but if I then try to change the audio with the "green button" only SetDigitalAudioDevice(); is shown up. CU Bernd Zierath

2 1

Plugin cDevice audio switch handling
by b.zierath＠ebv.com 07 Oct '05

07 Oct '05

Hi, I have a question regarding how a cDevice inside a plugin should handle audio channel/track switches from the "green button". The only notification that comes trough is SetDigitalAudioDevice(bool On) but I did expect that there is a notification like SetAudioChannelDevice(int AudioChannel). CU Bernd Zierath

2 1

Plugin cDevice audio switch handling
by Zierath, Bernd (EBV) 07 Oct '05

07 Oct '05

Hi, I have a question regarding how a cDevice inside a plugin should handle audio channel/track switches from the "green button". The only notification that comes trough is SetDigitalAudioDevice(bool On), but I did expect that there is a notification like SetAudioChannelDevice(int AudioChannel). CU Bernd Zierath

1 0

Troubles when resuming from EPG scan
by Tuomas Jormola 07 Oct '05

07 Oct '05

Hello, My VDR system is having some annoying problems with EPG scanning. I'm not quite sure where to begin looking for solution so I thought to share my experiences with this list. First, the system configuration. A regular Athlon64 PC running Ubuntu/ breezy (i386, not 64bit amd64). This is a one-card VDR box with a Technotrend DVB-C 2.1 FF card installed. I've tried with Ubuntu's 2.6.10 and 2.6.12 kernels and self-compiled 2.6.14rc2 (there was some DVB driver updates since 2.6.12 so I thought to try a later kernel too). dvb-ttpci firmware is 261f. VDR version is 1.3.33 with dvbplayer5 patch by Reinhard Nissl, and enAIO 2.6 and dvbsubtitles 0.3.8 patch compiled by Rolf Ahrenberg. These plugins are used: control, subtitles, osdteletext, xine, text2skin, lcdproc, femon. I'm using the Xine plugin with Xine player to display TV with a projector connected to computer's DVI port. The TV network is HTV in Helsinki, Finland. I've got an HTV Conax card connected to the DVB-C card. channels.conf contains about 135 TV, radio and data channels. When the EPG scan kicks in, either automatically after the EPG scan timeout is reached or manually choosing scan in EPG setup or after issuing SCAN command via SVDRP connection, live TV picture goes off and vdr-xine displays a NO SIGNAL picture as expected. But sometimes, it looks like the scan never completes successfully. After about 2 hours since the "info: Starting EPG scan" message in syslog EPG bugfix statistics for various channels might appear to the syslog (but not always, I'm using the EPG bugfix level 3). But the channel that was on before starting the EPG scan is never switched back on. In fact, VDR is unable to display picture and sound on any channel anymore, not even after restarting VDR. You have to unload the dvb_ttpci driver with rmmod and modprobe it again and then it works again. Now the funny thing is that EPG scanning sometimes sort of works. It takes about 7 minutes to complete and then the last channel viewed is switched on again. However, many times after completing the scan, picture has all kinds of disorders so you really can't watch it and sound is awful snap, crackle & pop. Example can be seen in [1]. This is on all channels, all muxen. I sometimes get that also when normally changing channels, but that's pretty rare. Again, just restarting VDR doesn't fix these disorders, you have to reload the kernel driver in order to get working picture. The syslog is flooded with messages that can be seen in [2]. Femon reports very good signal quality all the time. And then, sometimes the scan works just fine, the last channel is restored normally with a clear picture and sound after the scan completes. I've not been able to find any pattern between these three possible outcomes (all channels lost, bad picture while changing back to the last channel, works ok) of EPG scan. Except that automatic scan seems to always produce the all channels lost scenario, though it shouldn't make an sense (the actual scanning process, whether launched automatically or manually, is always the same, right?). But anyways, when you leave the VDR box on for the night and try to watch TV the next day, there's always the NO SIGNAL picture greeting you and no channels available until VDR is stopped, kernel driver reloaded and VDR started again. Any idea what might cause the bad picture after resuming from EPG scan (and occasionally, while normally changing channels)? And why tuning any channel after initiating an EPG scan sometimes doesn't work? Is anyone else using HTV (or other) network experiencing this? [1] http://solitudo.net/vdr-bad-picture.jpg [2] http://solitudo.net/vdr-syslog.txt Thanks, -- Tuomas Jormola <tjormola(a)cc.hut.fi>

1 0

← Newer
1
...
11
12
13
14
15
16
17
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr October 2005