vdr October 2005

vdr@linuxtv.org

152 participants
172 discussions

RE: [vdr] mplayer w/ softdevice
by Vladimir Shved 26 Oct '05

26 Oct '05

> -----Original Message----- > From: vdr-bounces(a)linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf > Of Nicolas Huillard > Sent: Monday, October 24, 2005 1:55 PM > To: Klaus Schmidinger's VDR > Subject: Re: [vdr] mplayer w/ softdevice > > Vladimir Shved a écrit : > > Is there any workarounds to these issues or am I doing something wrong? > > Did you try the softplay plugin, which is the natural player to use with > softdevice. It is available on berlios.de, on the same project than > softdevice. > I'm sure the author (Martin Wache) will welcome any input and any new user > ! The softplay plugin missing some essential features(forwarding/rewinding etc.) to be usable and it does not play some files as well as mplayer. I'm not sure if it's the issue with softplay or with ffmpeg library on my system but mplayer plays them much better. Obviously the author of softplay is trying to re-invent the wheel, whats the point of creating another player, isn't more efficient to fix already existing player to work with softdevice?

2 1

RE: [vdr] mplayer w/ softdevice
by Vladimir Shved 26 Oct '05

26 Oct '05

> -----Original Message----- > From: vdr-bounces(a)linuxtv.org [mailto:vdr-bounces@linuxtv.org] On Behalf > Of Udo Richter > Sent: Monday, October 24, 2005 5:57 PM > To: Klaus Schmidinger's VDR > Subject: Re: [vdr] mplayer w/ softdevice > > Vladimir Shved wrote: > > When I browse through my media > > library, every time I finish viewing one file with mplayer, I have to go > > back to mplayer plugin using Menu, then down, down.. keys etc. > > Thats a limitation of VDR's plugin system. A plugin cannot open a menu > from replay mode or other situations, the only way to open a plugin menu > is from the main menu. No it's not the limitation of FF cards output, seems to be only with softdevice. There seems to be two layers, OSD and Video one, and it seems that VDR can't use OSDs layer on softdevice when mplayer is active. There might be very easy fix/workaround but I'm no programmer and I might be wrong about whole layer thing. Just trying to figure out why its not working.

1 0

feeds
by Leo Márquez 26 Oct '05

26 Oct '05

Hi, I'm trying to tune fta(free to air) feeds with VDR. Feeds are temporaly channels for an event that usually have low freqüencies. To tune them I try to add or edit channels in my list. But I only know this for example: 30W (hispasat) frequency: 11538 polarization: H sr 6100 Some of this feeds are in 422 format. I have a nexus-s dvb-s FF card. My question is if there is a method to force the pid update of a channel because I don't know this data. I know the update names and pid option of the dvb card configuration but I don't know exactly how works. It seems that I have to wait VDR to update all channels. Thanks.

2 2

Re: Trans.: [vdr] FF vs Budget cards ??
by michaelip＠free.fr 26 Oct '05

26 Oct '05

Selon Simon Baxter <linuxtv(a)nzbaxters.com>: > Hi. > > I'm using a Hauppauge Nova-T budget card under VDR. It works like a > charm - can record one and view multiple channels in the same > transponder at once. > > Is this also the case with FF cards? With their 'onboard' mp2 decoder, > do they also allow recording of multiple channels? > > How does this work? Are the mp2 decoder and 'tuner' separate on the > card, and can VDR dump some streams to disk as well as using the > decoder? > > > Just curious - before I shell out some Â£Â£!! > > > Thanks > > Simon > > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > Hello. >From what I heard, FF cards have now this feature also ! Meanwhile, you need to patch the dvb drivers with a new firmware... I also have a budget card... So I don't know if it works so nice than that, but it seems !

1 0

DVB-S2 and current cards
by Robert Schneider 26 Oct '05

26 Oct '05

Hi, just reading heise newsticker, I wonder whether DVB-S2 is something that really needs new hardware to be received. In the end, you get a data stream from the satellite and my understanding was, what makes the standard DVB-S is basically the specification of the data. Can someonw shed some light on this for me? Regards, Robert

2 2

[Fwd: sc]
by João Mamede 25 Oct '05

25 Oct '05

hmmm naaa...they can try :D.But lawyers in EU-Pt do not search in vdr mailing lists (prob they don't know what linux is :D besides)..who told you I don't have subscription of the service?I have the service card..but don't have cam module for PC. :D. And the moment the cops try to enter my house...there it goes my crypted partition file with shreder :D.

3 2

Dumb question on DVB-C
by Simon Baxter 25 Oct '05

25 Oct '05

Hi. I'm currently using a Nova-T card for terrestrial DVB, but would like to add a DVB-C card and connect to cable. Am I right in assuming that channels on cable are organised much like on terrestrial, with 3 or 4 transponder frequencies carrying 3 or 4 channels each? I wonder, because as the cable is provided by a single supplier, I wasn't sure how the channels are mapped. Secondly, are channels that require CAM decrypting all generally on the same transponder? Or are these pay-channels interspersed with the free- to-air ones across the frequencies? Thanks

3 2

burn-plugin: UTF converting
by Oleg 24 Oct '05

24 Oct '05

Hi, I wondered about converting to UTF8 ( EscapeLatin1toUTF8() ). What's about another codepages? Here is patch that must working for all cases.... Cheers Oleg

2 2

[ANNOUNCE] Enigma-0.3a
by Andreas Brugger 24 Oct '05

24 Oct '05

Hi list! I just wanted to realease a updated package of the Enigma skin which now uses a modded version of the 'Vera'-font. Now it is possible to view the 'WarEagle'-icons. this mod was kindly provided by Frank Jepsen. See the changelog and the readme for more information. The skin is available on my homepage (http://home.pages.at/brougs78) or directly via the following link: http://count.primawebtools.de/dlcountx.php?encid=40102&id=108230 Here the changelog: 2005.07.05: Version 0.3a - added finnish translation (thanks to Rolf Ahrenberg) - added the 'Misc'-section in Enigma.trans to keep the log clean of some annoying 'no translation found for ...'-messages (thanks to Rolf Ahrenberg) - altered the condition for the styling (text with variable width or fixed width) of 'MenuText' to comply with vdr-1.3.25 (thanks to C.Y.M) - now using a modified version of the 'Vera'-font which was kindly provided by Frank Jepsen. It includes the 'WarEagle'-icons (see README for more info). The monospaced font in the command-window is still the original VeraMono.ttf Bye and have fun, Andreas Brugger

4 17

vdr video data stream broken
by Gregory Dudek 24 Oct '05

24 Oct '05

A couple of times I have seen the vdr message ERROR: video data stream broken which (a) leads to a vdr exit, and (b) keeps happening every time I re-launch vdr. As far as I can tell, this occurs if a recording gets scheduled on a channel that is (subsequently) deleted or otherwise unavailable (e.g blocked with the very nice 'taste' plugin). This can be a real pain to figure out! My solution is to (quickly) visit the timers submenu and cancel the offending recording before the next exit (which takes 30 seconds to occur). I thought I should mention this in case somebody else gets stuck, or in case somebody has a proper fix. The relevant code is on line 118 or recorder.c in vdr version 1.3.34. I have tried to patch it by replacing the call to cThread::EmergencyExit(true); with: Cancel(3); break; but the error is erratic enough that I can't be sure this is a fix.

1 0

← Newer
1
2
3
4
5
6
7
8
9
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr October 2005