vdr November 2005

vdr@linuxtv.org

144 participants
178 discussions

Problem with transfer mode, xine plugin and ActualDevice
by Luca Olivetti 13 Nov '05

13 Nov '05

Well, I don't know where the problem actually lies (I guess the xine plugin), but: I'm using vdr with a dxr3 and the xine-newtork plugin (0.7.4, I know I should update it, but I couldn't spot anything related to this problem in HISTORY for 0.7.5 and 0.7.6). Normally the dxr3 is the primary device but when the xine plugin is in use it will switch itself as the primary. The problem is that right after the switch a new transfer thread starts *before* the previous one ends, so receiverDevice is left pointing to NULL, so that ActualDevice fails to report the correct device, until the next channel switch. Bye -- - Yo también quiero una Europa libre de Patentes de Software - - I want a Software Patents Free Europe too! And you? - --------------------------------------------------------------- EuropeSwPatentFree - http://EuropeSwPatentFree.hispalinux.es

2 15

Re: [vdr] mp3 plugin : image corruption]
by Simon Baxter 13 Nov '05

13 Nov '05

> > >>Please give "-V xshm" a try. If it works properly, then it is an issue > > >>of this specific output driver. > > > > > > It's the same with all output drivers. The MPEGs play fine with 'xine - > > > l <file.mpeg> > > > > Can you provide me a couple of your mpeg files? Please find attached. They display fine with 'xine -l <file>'. Any help greatly appreciated! Thanks

3 9

[ANNOUNCE] vdr-femon-0.9.5
by Rolf Ahrenberg 13 Nov '05

13 Nov '05

Hi, the "Father's Day" release of vdr-femon plugin is available at: http://www.saunalahti.fi/~rahrenbe/vdr/femon/files/vdr-femon-0.9.5.tgz 2005-11-13: Version 0.9.5 - Updated for vdr-1.3.36. - Added french translation (Thanks to Nicolas Huillard). - Enabled bitrate commands via SVDRP. - Added new SVDRP commands. - Modified femon service without incrementing version number. - Added "Duotone" theme for 2bpp on screen displays. - Fixed crash bug in femonreceiver. - Fixed setup page bug (Thanks to Thomas Günther for reporting this one). BR, -- rofa

1 0

vdr 1.3.27 restart problem
by Matthias Bodenbinder 13 Nov '05

13 Nov '05

Hi, vdr is running fine on my machine except for one strange thing. I can start/stop vdr perfectly fine, but when I select "Neustart" in the vdr menu (restart), it is coming into an endless loop of restarting itself. The logfile then says: ov 12 16:31:56 localhost vdr[16858]: loading /var/lib/vdr/remote.conf Nov 12 16:31:56 localhost vdr[16858]: loading /var/lib/vdr/keymacros.conf Nov 12 16:31:56 localhost input.agent[16860]: evdev: already loaded Nov 12 16:31:56 localhost vdr[16858]: no DVB device found When I say /etc/init.d/vdr restart everything works fine. What is going wrong here? System details are: Ubuntu 5.10 kernel 2.6.12-9-k7 vdr 1.3.27 Hauppauge Nexus-s Rev 2.3 Thanks for your help, Matthias

2 2

[OTAnn] Feedback
by shenanigans 13 Nov '05

13 Nov '05

I was interested in getting feedback from current mail group users. We have mirrored your mail list in a new application that provides a more aggregated and safe environment which utilizes the power of broadband. Roomity.com v 1.5 is a web 2.01 community webapp. Our newest version adds broadcast video and social networking such as favorite authors and an html editor. It?s free to join and any feedback would be appreciated. S. ---------------------------------------------------------------------------------------------------------------------------------------------- Broadband interface (RIA) + mail box saftey = <a href="http://Linux_VDR_Discussion_List.roomity.com">Linux_VDR_Discussion_List.roomity.com</a> *Your* clubs, no sign up to read, ad supported; try broadband internet. ~~1131471847240~~ ----------------------------------------------------------------------------------------------------------------------------------------------

2 1

[patch] network vdr-xine-0.7.6, use -i to select the ip to bind to
by syrius.ml＠no-log.org 12 Nov '05

12 Nov '05

Hi, I did it for me, maybe it could be of some use for someone else. With the genuine vdr-xine plugin -i could be used to choose the instance number and one can have several vdr+vdr-xine running on the same box. Here with the networked vdr-xine, it could be used to select the ip to bind to. What are the differences ? If -i is not used, the networked vdr-xine bind to all local interfaces (as before) If you want to run 2 vdr+vdr-xine on the same machine, it has to have 2 ip addresses, the first vdr has to be ran with -P 'xine -i IP1.IP1.IP1.IP' and the second one with -P 'xine -i IP2.IP2.IP2.IP' it's a quick hack, I hope i've been clear enough and that it may be of some use. --

1 0

Odd behiviour of dish
by Lauri Tischler 12 Nov '05

12 Nov '05

After changing to vdr-1.3.36 and rotor-0.1.2 my dish behives strangely. The dish thinks that it's 'rest' position is allways at S1.0W If I select some channel at S19.2E, the dish moves there and things work normally. If I then select some DVB-T channel, the dish moves back to position S1.0W. EPG scantime is set at 0. Any ideas ? -- lwgt(a)iki.fi * Using HTML-mail is like breaking wind in a church * 60.2N 24.7E * it is not illegal, just extremely bad manners *

2 1

[ANNOUNCE] vdr-softdevice-0.2.1
by Stefan Lucke 12 Nov '05

12 Nov '05

Hello, softdevice team (Torgeir Veimo, Martin Wache and me, Stefan Lucke) with help from softdevice users, is pleased to announce a new release of vdr softdevice plugin. General info: Softdevice plugin enables vdr to run on your desktop with so called budget cards. You'll get vdr output via framebuffer or X11-Xv or DirectFB or vidix to your screen. Decoding is done via ffmpeg. Plugin's homepage is located at: http://softdevice.berlios.de/ Changelog since last release: 2005-11-12: softdevice-0.2.1 - speed up moving of cutmarks by a factor of about 100. I forgot to signal that new data is available in StillPicture() :-/ - new packet mode: make some softdevice functions available to other plugins like softplay useing the new service interface 2005-11-06: - video-xv: some of X11 atoms could be set via OSD too. So using hardcoded hotkeys for brightness, contrast, hue and saturation is obsolete and may be removed soon. - video-dfb: (by Laurence Abbott) selecting field parity and triple buffering on via epia boards. That could be used for others too if primary head is connected to TV. Triple buffering is independently available as a separate option now. "-vo dfb:viatv" "-vo dfb:triple" 2005-11-04: - some more finnish translations (by Rolf Ahrenberg) - sync timer mode selectable via OSD - removed translations of empty lines (by Rolf Ahrenberg) - made sig timer the default one for new users 2005-11-02: - restructured OSD setup 2005-11-01: - some some german translations (with help from Andre Neumann) - hide main menu entry via OSD 2005-10-29: - french translations (by Nicolas Huillard) - packet playback: assume we get complete frames via packet interface. This fixes playing divx via softplay. - fix frame dropping with IEEE1394 read. 2005-10-26: - fix cropmode handling via OSD - set some vars for aspect calculation to reasonable defaults 2005-10-25: - video-xv: fix aspectratio recalculation upon ConfigureNotify events - minor cleanup: moved static floats to member double (cVideoOut) 2005-10-14: - reverted change from 2005-01-12 as effect it not reproducable and delivers now wrong results for some streams. -- Stefan Lucke

1 0

[ANNOUNCE] vdr-autosort-0.0.5
by CopyPoint 12 Nov '05

12 Nov '05

Here's something new to play with: http://www.copypointburscheid.de/linux/vdr-autosort-0.0.5.tgz Have fun Thorsten =============================================================== From History: 2005-11-10: Version 0.0.5 - Fixed a minor compiler warning - Added option 'StartName' witch checks the first character of the channel-name - Added option 'NotName' to exclude names or parts of them - Added option 'HasSource' to seperate by different satellites (as requested by Frank Scherthan) - Fixed some minor bugs in function 'ChannelFitsGroup' - Added missing syslog-entry if config file wasn't found (thanks to Lauri Tischler for reporting this) - Implemented option 'SubSections' witch splits a group into sub-groups A - Z - Raised some important messages from debug- to error-log-level =============================================================== Project's homepage: http://www.copypointburscheid.de/linux/autosort.htm Latest version: http://www.copypointburscheid.de/linux/vdr-autosort-0.0.5.tgz ===============================================================

2 2

IR Blaster
by Simon Baxter 11 Nov '05

11 Nov '05

Has anyone got IR blaster (with i2c or ivtv???) working on a PVR-150 analog card, under VDR??? Thanks

1 0

← Newer
1
...
8
9
10
11
12
13
14
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr November 2005