vdr November 2005

vdr@linuxtv.org

144 participants
178 discussions

alignment problems in (sub)menus (vdr / Rotor Plugin/ Setup Plugin)
by Markus Hahn 11 Nov '05

11 Nov '05

Hi there, by enhancing "Setup plugin" to call other plugins (osdMenu), I get some trouble with Rotor Plugin mentioned alignment resp. EditableWidth. (causes a segfault in rotorplugin menu -> cMenuEditSatItem) Inside SetupMenu of Setup-Plugin I call SetCols(30) to alignment elements of ENTRY (generic menus). If I keep track of Skin Tabs, the value of Tab(2) decreases in Setup Plugin 60 values (pixels???) in compare to MenuMain. I try to set SetCols(0,0) inside the MainMenu of Rotor Plugin etc. but this has no affect at all. Any suggestions? Thanks all movimax

2 1

Re: [vdr] testing vdradmin-0.97-am3.4.2rc3
by C.Y.M 10 Nov '05

10 Nov '05

Jarmo Järvenpää wrote: > I have seen this many times too. I used to use vdradmin and it's > autotimers until got frustrated on the number of wrong recordings. > > This applies too on single recordings created with vdradmin. > > All recent VDR (patched with subtitles, many plugins) versions have had > this. > > > BR, > Jarmo > > > Andreas Mair wrote: > >> Hi, >> >> which VDR version are you using? >> I guess it's >=1.3.24. In this case VDRAdmin uses the status flags >> returned by "lstt". So it might be a bug in VDR. I once had a wrong >> "recording" identification, but failed to reproduce it. >> So if it's reproduceable for you, I think Klaus would like to know if >> it's also the case with vanilla VDR (without patches/plugins). >> >> Kind regards, >> Andreas >> >> On Sunday 06 November 2005 09:42, C.Y.M wrote: >> >>> I have been testing vdradmin-0.97-am3.4.2rc3 from vdrportal.de and have >>> come across a bug that I can not explain. When I check the "Timers" >>> page, it shows the recording light on several timers scheduled >>> throughout >>> the week. For example, today is Sunday, but the timer page says that >>> the >>> timers scheduled on Wednesday and Friday are currently running. Has >>> anyone else noticed this problem? >>> I should have also mentioned that this is *not* a problem with the latest "stable" release of vdradmin (vdradmin-0.97-am3.4.1). I only see the problem with the latest release candidates. I will check lstt and send back. Best Regards,

5 14

[Announce] LNB-sharing patch for VDR 1.3.36
by Matthias Lötzke 09 Nov '05

09 Nov '05

Hello! A new release of the configurable LNB-sharing patch for VDR 1.3 is available at: http://xn--ltzke-jua.de/dvb/VDR_LNB_sharing_patch/configurableLNBshare-VDR_… Changes: - fixed a bug where Device->SwitchChannel() with LiveView == false was not handled the right way in all cases - adapted to VDR 1.3.36 For general information about the LNB-sharing patch have a look at: http://xn--ltzke-jua.de/dvb/VDR_LNB_sharing_patch/Description.txt http://www.vdr-wiki.de/wiki/index.php/Lnbsharing-patch (german) Matthias.

1 0

[Fwd: Re: [vdr] VDR and polarization problems]
by "Sami J. Mäkinen" 09 Nov '05

09 Nov '05

Sigh, my email has changed. This time posting should succeed.

2 1

replace cDvbPlayer
by Patrick Fischer 09 Nov '05

09 Nov '05

Hello A coupe of days ago I wrote to this list an question about current running recordings and time shifting. I got no answer :-( Now I would like to reword my question: If I'm right, the cDVBPlayer(Control) handles all playing of recordings and time shift. Now I would like to add some functions to the player to get some more informations about the current running recording. I can't find a way to implement it by a plugin. I could "re" implement a cMyDVBPlayer and the cMyDVBPlayerControl. But how to replace the original cDVBPlayer with cMyDVBPlayer without patching? By the way: cReplayControl was derivative from cDvbPlayerControl cDvbPlayerControl has a cDvbPlayer cDvbPlayer was derivative from cPlayer every time a new recording should be played vdr cControl::Shutdown() and then cControl::Launch(new cReplayControl); I cant see a possibility to replace it without patching. Maybe somebody (klaus, xine developer, softdevice developer,...) can help me with some words. Patrick P.S. sorry for my bad English

2 1

VDR and polarization problems
by Harri Helmroos 09 Nov '05

09 Nov '05

Hello to everyone! I've been searching for help to a problem I have with VDR. Problem is, that I cannot watch channels with V-polarization without first switching to a channel which has H-polarization. This problem didn't exist before when I had single LNB's, only with the new twin-lnb's I installed. I've tried sooo many different combinations in diseqc.conf without finding a solution (if diseqc.conf is the problem??), so I'm finally turning to you guys, anyone have an idea where the problem is (or might be), or even where to start looking? My setup is as follows: Gentoo Linux Suse Linux 10.0 (Multiboot with Gentoo) Kernel on both systems 2.6.13 3 twin-lnb's (pointing at 1.0W, 5.0E and 13.0E) Diseqc 4-1 Skystar 2-pci with softdevice-plugin If I forgot something, let me know and I'll post the missing info. Thanks in advance, HH

4 10

HOWTO write a simple mpeg-TS writer plugin.
by BRUNETON Béranger 08 Nov '05

08 Nov '05

Hi, I would like to write a very simple plugin which record a tuned channel into a file using mpeg-ts format. The idea is to use svdrp to start recording. Does it look like feasible without an heavy development? Which function from the plugin API can I use? Regards

1 0

external EPG source for several german stations
by Thilo Wunderlich 08 Nov '05

08 Nov '05

I'm looking for a tool to feed EPG data from external source for the following stations: Das Vierte (they are going to provide EPG in the future) XXP Nick Comedy DSF Deutsche Welle TV (the provided EPG is crap) These channels don't provide EPG, do they? Anyone using a program to feed EPG for any of these channels? A channel without EPG is nearly nonexistent for me as I'm just using the 'whats on now/next and program' buttons. Thilo

2 1

[PATCH] turn all VDR remotes on/off
by Lucian Muresan 08 Nov '05

08 Nov '05

Hi, following your suggestions in the thread "@Klaus, before I start working on this patch..." I made a patch that disables/enables all remotes in VDR, only triggerd by a plugin. So the default behaviour remains the same, and if I load my plugin I can quickly enable/disable the remotes (I even need to reenable them right before every HITK and disable them back right after that, therefore the way this was solved in vdr-externalplayer by destroying/creating the cRemote Objects all the time didn't suit me, therefore I need such a quick way of turning them on and off). I hope this gets included in some form, and maybe vdr-externalplayer can then too switch to this method of enabling/disabling the remotes. Sorry that the patch is against 1.3.34, but I think it should apply well even to 1.3.36. Lucian P.S. For those interested, my plugin "vdr-freevo" doesn't do much for now (I guess it will later), but enabling/disabling the remotes via SVDRP command "plug freevo rctl on/off", more details to come later today on the Freevo MLs. diff -Naur vdr-1.3.34_orig/remote.c vdr-1.3.34/remote.c --- vdr-1.3.34_orig/remote.c 2005-09-03 14:29:48.000000000 +0200 +++ vdr-1.3.34/remote.c 2005-11-05 01:03:46.000000000 +0100 @@ -28,6 +28,7 @@ cMutex cRemote::mutex; cCondVar cRemote::keyPressed; const char *cRemote::plugin = NULL; +bool cRemote::Enabled = true; cRemote::cRemote(const char *Name) { @@ -73,6 +74,8 @@ bool cRemote::Put(eKeys Key, bool AtFront) { + if (!Enabled) + return true; if (Key != kNone) { cMutexLock MutexLock(&mutex); if (in != out && (keys[out] & k_Repeat) && (Key & k_Release)) @@ -101,6 +104,8 @@ bool cRemote::PutMacro(eKeys Key) { + if (!Enabled) + return true; const cKeyMacro *km = KeyMacros.Get(Key); if (km) { plugin = km->Plugin(); @@ -118,6 +123,8 @@ bool cRemote::Put(uint64 Code, bool Repeat, bool Release) { + if (!Enabled) + return true; char buffer[32]; snprintf(buffer, sizeof(buffer), "%016LX", Code); return Put(buffer, Repeat, Release); @@ -125,6 +132,8 @@ bool cRemote::Put(const char *Code, bool Repeat, bool Release) { + if (!Enabled) + return true; if (learning && this != learning) return false; eKeys Key = Keys.Get(Name(), Code); @@ -175,6 +184,11 @@ } } +void cRemote::EnableRemote(bool bEnable) +{ + Enabled = bEnable; +} + // --- cRemotes -------------------------------------------------------------- cRemotes Remotes; diff -Naur vdr-1.3.34_orig/remote.h vdr-1.3.34/remote.h --- vdr-1.3.34_orig/remote.h 2005-09-03 14:28:42.000000000 +0200 +++ vdr-1.3.34/remote.h 2005-11-05 00:52:01.000000000 +0100 @@ -29,6 +29,7 @@ static cCondVar keyPressed; static const char *plugin; char *name; + static bool Enabled; protected: cRemote(const char *Name); const char *GetSetup(void); @@ -51,6 +52,7 @@ static const char *GetPlugin(void) { return plugin; } static bool HasKeys(void); static eKeys Get(int WaitMs = 1000, char **UnknownCode = NULL); + static void EnableRemote(bool bEnable = true); }; class cRemotes : public cList<cRemote> {};

1 0

WxH & specific transponder crash
by João Mamede 08 Nov '05

08 Nov '05

Hi again: my 2 problems: 1-> in some channels i'm watching, WxH aspect have bigger H and they appear with big width and small height and that's quite annoying, if I move the window or if I press F(fullscreen toogle) twice it goes 4:3 fine. I'm using softdevice.I'd like to know how to solve this problem. Oh btw if in aspect I change 4:3 ->16:9 instead of doing it (moving the vertical it moves the horizontal) it shrinks the image vertically 2-> When I tune some channels in a specific transponder the image&sounds work for a split of a second and then vdr crashes, it wouldn't used to work, I've tried 2 versions of vdr vdr-1.3.36 and vdr-1.3.34. It was working fine but I had to format all my system and is not ok anymore I hope you understood me Best Regards João Mamede

1 0

← Newer
1
...
9
10
11
12
13
14
15
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr November 2005