vdr February 2005

vdr@linuxtv.org

107 participants
103 discussions

problem with DVB-S in Debian
by Eduardo 14 Feb '05

14 Feb '05

I've got a sat reciver: > Technotrend DVB-S 1.3 Premium into K7 700Mhz 768Mb: > Debian GNU/Linux 2.6.8-2-k7 i686 driver: > Incluidos en el kernel-image. firmware: > dvb-ttpci-01.fw Version 261d software: > VDR version 1.2.6 that I can not make it work. Loading the driver module, an it load ther firmware: > modprobe dvb_ttpci log in /var/log/syslog: kernel: Linux video capture interface: v1.00 kernel: saa7146: register extension 'dvb'. kernel: PCI: Found IRQ 9 for device 0000:00:09.0 << - Technotrend DVB-S 1.3 Premium kernel: PCI: Sharing IRQ 9 with 0000:00:04.2 kernel: PCI: Sharing IRQ 9 with 0000:00:04.3 kernel: saa7146: found saa7146 @ mem f09a5000 (revision 1, irq 9) (0x13c2,0x0000). kernel: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3). kernel: Siemens/Technotrend/Hauppauge PCI rev1.3 adapter 0 has MAC addr = 00:d0:5c:00:90:15 kernel: gpioirq unknown type=0 len=0 kernel: DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261d << - firmware kernel: DVB: AV7111(0) - firmware supports CI link layer interface kernel: av7110(0): adac type set to 0 kernel: videodev: "av7110" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ << - this's warning no error kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] kernel: av7110: found av7110-0. input.agent[3111]: evbug: blacklisted input.agent[3102]: evbug: blacklisted input.agent[3102]: evdev: already loaded input.agent[3111]: evdev: already loaded lsmod: dvb_ttpci 85644 0 dvb_core 88168 1 dvb_ttpci saa7146_vv 50560 1 dvb_ttpci video_buf 22212 1 saa7146_vv saa7146 19236 2 dvb_ttpci,saa7146_vv v4l1_compat 14404 1 saa7146_vv v4l2_common 6208 1 saa7146_vv videodev 9984 1 saa7146_vv firmware_class 10368 1 dvb_ttpci ttpci_eeprom 2880 1 dvb_ttpci info in sysfs: /sys/devices/pci0000:00/0000:00:09.0 << - Technotrend DVB-S 1.3 Premium class config detach_state device irq - >> irq 9 power/ resource subsystem_device subsystem_vendor vendor here's not entry for 0000:00:09.0 !!!! /sys/class/firmware timeout the devices here is it: ls -laF /dev/dvb/adapter0 total 8 drwxr-xr-x 2 root root 4096 2005-02-10 06:10 ./ drwxr-xr-x 6 root root 4096 2005-02-10 06:10 ../ crw-rw---- 1 root video 250, 1 2005-02-10 06:10 audio0 crw-rw---- 1 root video 250, 6 2005-02-10 06:10 ca0 crw-rw---- 1 root video 250, 4 2005-02-10 06:10 demux0 crw-rw---- 1 root video 250, 5 2005-02-10 06:10 dvr0 crw-rw---- 1 root video 250, 3 2005-02-10 06:10 frontend0 crw-rw---- 1 root video 250, 7 2005-02-10 06:10 net0 crw-rw---- 1 root video 250, 8 2005-02-10 06:10 osd0 crw-rw---- 1 root video 250, 0 2005-02-10 06:10 video0 the firmwares here is it: ls /lib/firmware dvb-fe-nxt2002.fw dvb-fe-tda10045.fw dvb-fe-tdlb7.fw dvb-fe-sp8870.fw dvb-fe-tda10046.fw dvb-ttpci-01.fw << - Version 261d Starting vdr: /etc/init.d/vdr start vdr[3324]: VDR version 1.2.6 started vdr[3324]: loading /var/lib/vdr/sources.conf vdr[3324]: loading /var/lib/vdr/diseqc.conf vdr[3324]: loading /var/lib/vdr/channels.conf vdr[3324]: loading /var/lib/vdr/commands.conf vdr[3324]: loading /var/lib/vdr/reccmds.conf vdr[3324]: loading /var/lib/vdr/svdrphosts.conf vdr[3324]: loading /var/lib/vdr/ca.conf vdr[3324]: loading /var/lib/vdr/keymacros.conf vdr[3324]: probing /dev/dvb/adapter0/frontend0 !!! The devece is not found ¡¡¡ vdr[3324]: ERROR: /dev/dvb/adapter0/frontend0: No existe tal dispositivo o dirección vdr[3324]: no DVB device found vdr[3324]: ERROR: invalid primary device number: 1 vdr[3324]: ERROR: no primary device found - using first device! vdr[3324]: ERROR: invalid primary device number: 1 logger: restarting VDR kernel: saa7146: unregister extension 'dvb'. << kernel: saa7146: register extension 'dvb'. kernel: PCI: Found IRQ 9 for device 0000:00:09.0 kernel: PCI: Sharing IRQ 9 with 0000:00:04.2 kernel: PCI: Sharing IRQ 9 with 0000:00:04.3 kernel: saa7146: found saa7146 @ mem f09a5000 (revision 1, irq 9) (0x13c2,0x0000). kernel: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3). kernel: Siemens/Technotrend/Hauppauge PCI rev1.3 adapter 0 has MAC addr = 00:d0:5c:00:90:15 kernel: gpioirq unknown type=0 len=0 kernel: DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261d kernel: DVB: AV7111(0) - firmware supports CI link layer interface kernel: av7110(0): adac type set to 0 kernel: videodev: "av7110" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] kernel: av7110: found av7110-0. input.agent[3383]: evbug: blacklisted vdr[3422]: VDR version 1.2.6 started vdr[3422]: loading /var/lib/vdr/sources.conf vdr[3422]: loading /var/lib/vdr/diseqc.conf vdr[3422]: loading /var/lib/vdr/channels.conf vdr[3422]: loading /var/lib/vdr/commands.conf vdr[3422]: loading /var/lib/vdr/reccmds.conf vdr[3422]: loading /var/lib/vdr/svdrphosts.conf vdr[3422]: loading /var/lib/vdr/ca.conf vdr[3422]: loading /var/lib/vdr/keymacros.conf vdr[3422]: probing /dev/dvb/adapter0/frontend0 vdr[3422]: ERROR: /dev/dvb/adapter0/frontend0: No existe tal dispositivo o dirección vdr[3422]: no DVB device found vdr[3422]: ERROR: invalid primary device number: 1 vdr[3422]: ERROR: no primary device found - using first device! vdr[3422]: ERROR: invalid primary device number: 1 logger: restarting VDR input.agent[3383]: evdev: already loaded input.agent[3407]: evbug: blacklisted input.agent[3407]: evdev: already loaded Is any body can help me? Thanks a lot. Eduardo. PD: I'm sorry by my English.

2 6

Re: [vdr] [ANNOUNCE] vdr-xine-0.7.1 plugin
by Anssi Hannula 13 Feb '05

13 Feb '05

Reinhard Nissl wrote: > Hi, > > Anssi Hannula wrote: > >>> I'm pleased to announce bugfix release 0.7.1: >>> >>> http://home.vr-web.de/~rnissl/vdr-xine-0.7.1.tgz >> >> >> Are you planning to add support for socket connections as proposed by >> Patrick Boettcher anytime soon? > > > We already had a discussion about that. He is currently working on a > "cleaner" approach (just one server side socket and only two sockets at > client side) and that one will be integrated into vdr-xine-0.8.0. By the way, your message didn't go to mailinglist. VDR ml configuration has changed so if you want to send message to mailinglist also, use the "reply to all" function of your email reader. This kind of configuration is commonly used in mailinglists. -- Anssi Hannula

5 11

[PATCH] vdr-1.3.21 source dependent new channel insertation
by Luca Olivetti 13 Feb '05

13 Feb '05

This is a new version of the patch by Christian Schuld that adds new channels in a location dependent on the source (useful to keep channels grouped by source in a multi satellite setup). The difference is that each new channels are added at the end instead of at the beginning (as in the original patch). I't also made against vdr-1.3.21 but it should apply also to 1.3.20 (and maybe earlier versions). Bye -- - Yo también quiero una Europa libre de Patentes de Software - - I want a Software Patents Free Europe too! And you? - --------------------------------------------------------------- EuropeSwPatentFree - http://EuropeSwPatentFree.hispalinux.es

1 0

Re: [vdr] Re: problems with radio recordings
by Wolfgang Rohdewald 13 Feb '05

13 Feb '05

On Samstag 12 Februar 2005 13:33, Klaus Schmidinger wrote: > Can you post the complete channels.conf entry? > It would need to be a channel on Astra 19.2, Astra 28.2 or Hotbird 13 > for me to test, since these are the only satellites I can currently receive. Swiss Classic;Schweizer Radio International:12398:hC34:S13.0E:27500:0:224:0:0:934:318:8500:0 Swiss Pop;Schweizer Radio International:12398:hC34:S13.0E:27500:0:225:0:0:935:318:8500:0 Swiss Jazz;Schweizer Radio International:12398:hC34:S13.0E:27500:0:226:0:0:936:318:8500:0 -- Wolfgang

1 0

[ANNOUNCE] vdr-actuator-0.0.8 plugin
by Luca Olivetti 13 Feb '05

13 Feb '05

Hello, I'm releasing a new version (0.0.8) of the "actuator" plugin available at http://club.telepolis.com/l.o/vdr/ This plugin controls a linear actuator (or an horizon to horizon one) through the parallel port with a simple circuit. CHANGES: - Implement new (in vdr-1.3.20) method Stop - Removed the note about the dxr3 shutdown problem (saving the dish position early with the Stop method makes the problem irrelevant) - Skip non satellite sources in main menu - Changed pid assignment in cMainMenuActuator::Tune() to (hopefully) avoid problems with the new audio pid management in vdr - Added "Scan satellite" option (idea shamelessly stolen from kikko77(a)altervista.org, author of the channelscan plugin) - Changed the 'position-display' patch (adapted for vdr-1.3.20 and avoids overwriting the osd of the newly entered channel number if the dish is moving) - New parameter MinRefresh, to avoid screen artifacts with a dxr3 Bye -- - Yo también quiero una Europa libre de Patentes de Software - - I want a Software Patents Free Europe too! And you? - --------------------------------------------------------------- EuropeSwPatentFree - http://EuropeSwPatentFree.hispalinux.es

1 0

Problem with Premiere option channes
by Dominik Strasser 13 Feb '05

13 Feb '05

Hi all, one last problem remains with my VDR setup: the Premiere option channels (for Premiere Direkt/Fussball) don't work fully. Now with the Bundesliga playing, my channel.conf looks like this (with "update channels" set to "add new channels"): D 1 - 13|45:346:M64:C:6900:0:0:0:0:212:133:1:0 FCK - HANSA:346:M64:C:6900:0:0:0:0:245:133:3:0 HSV - VfB:346:M64:C:6900:0:0:0:0:241:133:3:0 BRE - BMG:346:M64:C:6900:0:0:0:0:244:133:3:0 D 2 - 14|30:346:M64:C:6900:0:0:0:0:211:133:17:0 D 3 - 12|30:346:M64:C:6900:2303:2304=deu,2305=deu;2307=deu:0:1702,1801,1722:210:133:4:0 BVB - BO:346:M64:C:6900:0:0:0:0:240:133:3:0 FREI - H96:346:M64:C:6900:0:0:0:0:243:133:3:0 Info-Kanal:346:M64:C:6900:3327:3328=deu,3329=deu:0:1722,1801,1702:209:133:4:0 BER - FCN:346:M64:C:6900:3071:3072=deu,3073=deu:0:1801,1702,1722:208:133:4:0 Additionally, I have to manually enter my PIN for the two channels that can be shown (the last two). I already started with an empty (repectively with 1 channel per transponder) channels.conf. It doesn't help. I have an AlphaCAM, with a Premiere P02 card which work fine under WINDVBLIVE (with the option channels), so I would rule out problems with these. As you see, some PID's are updated while others aren't. syslog shows messages about changing the PIDs for the working channels, but nothing for the others. Regards Dominik

1 0

[PATCH] Ignore leading special char in recordings
by Patrick Gleichmann 13 Feb '05

13 Feb '05

Hi, just a 5 minute patch that skips the first character if it's not alphanumeric, so basically '%' and '@' when the recordings are sorted. regards patrick (aka ravemax)

2 1

replay-display with playlist ?
by vdr＠pfroen.de 13 Feb '05

13 Feb '05

Hello List, The mp3-plugin provides the possibility to view the player with the current playlist. This is only possible in "classic-view"-mode, as this view is not skinable. As far i understood this, the problem is, that VDR does not provide such a player and therfore the Plugin has to paint it itselfe. @Klaus Is there any hope, that you implement such a view into VDR-core ? I know, that many users would love to have this feature back within text2skin look & feel ... and I'm looking forward to implement it into DeepBlue. Stefan

1 0

upmixing dvb audio
by David Thompson 13 Feb '05

13 Feb '05

Hello: FIrst I want to thank all of you again for your help. My dvb-t pci premium system with vdr is now working absolutely great. Have one last question which is slightly off topic but thought someone here must have dealt with it before. Would like to upmix the 2 channel dvb audio from my ttpci premium card that is fed into my soundblaster live 5.1 soundcard via the line in port. Before I used a ttusb budget device with vdr xine and got used to the 5.1 upmixed audio! Anyone know how to do this? Have looked in vain thus far for a solution .. I am running ALSA - kernel 2.6.7 - emu10k1 driver - soundblaster live 5.1 - analogue 5.1 speakers. Cheers, David

1 0

Re: [vdr] Re: problem with 2 card system
by Stefan Taferner 13 Feb '05

13 Feb '05

On Friday 11 February 2005 18:47, Vladimir Shved wrote: > > -----Original Message----- > > From: vdr-bounce(a)linuxtv.org [mailto:vdr-bounce@linuxtv.org] On Behalf Of > > Stefan Taferner > > Sent: Tuesday, February 08, 2005 2:58 PM > > To: vdr(a)linuxtv.org > > Subject: [vdr] Re: problem with 2 card system > > > > On Tuesday 08 February 2005 12:29, Peter Juszack wrote: > > > I just got a second DVB-S card for my VDR. > > > > > > Nexus-S FF + Technisat Skystar II Rev 2.6 > > > > I do not know which Linux kernel you use nor which dvb driver > > version (hint ;) .... but I had problems with 2.6 kernels > > until I installed 2.6.10. Not Skystar, but Nexus-S + Nova-S. > > > > Kind regards, > > Stefan > > The thing is I was using 2.6.10 kernel w/ cvs dvb drivers but I think I > fixed it. I moved the card to different PCI slot and everything started to > work reliably. Just weird... Then you had a problem with shared interrupts. --Stefan

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr February 2005