vdr July 2006

vdr@linuxtv.org

91 participants
102 discussions

warning - cannot set dumpable: Invalid argument
by Sebastian Kemper 23 Jul '06

23 Jul '06

Hi everybody, I installed kernel 2.6.16.24 lately and get this warning when starting vdr. The same should happen with 2.6.17.4 since both share the same Changelog: http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.17.4 http://www.kernel.org/pub/linux/kernel/v2.6/ChangeLog-2.6.16.24 And I quote: "During security research, Red Hat discovered a behavioral flaw in core dump handling. A local user could create a program that would cause a core file to be dumped into a directory they would not normally have permissions to write to. This could lead to a denial of service (disk consumption), or allow the local user to gain root privileges." So I was wondering if you could adapt vdr's dumpfile handling to the new situation and put the changes in vdr-1.4.2 in order to get rid of the warning, please. Thank you Sebastian

5 10

StreamDev server limited connections?
by JikJikMan 23 Jul '06

23 Jul '06

Hi All, Does streamdev-server plugin for VDR has limited connections? I tried vdr-streamdev-snapshot-20060505 on vdr-1.4.0, but each time my connections with videolan-0.8.5 reaches to five concurrent connections, I could not connect any additional client to it. It doesn't seem to be hardware resource lack, Because my system has 1 GB free ram when five clients connected and also cpu usage is very low. I tested it with 2 client PCs and the results was same. Where is the problem? John.

3 3

[announcement] vdr2jpeg-0.0.9
by Andreas Brachold 22 Jul '06

22 Jul '06

Hello, Here a new release of vdr2jpeg. To build with lastest checkout from ffmpeg svn repository. (tested with last ffmpeg checkout r5812) Changes -------- update VERSION checking to build with ffmpeg-svn COPYING missed inside package cleanup code static linking failed, reorder librarys for linking strip debugging symbols on non-DEBUG target change Makefile to default build without FFMDIR must defined What's it --------- This is a simple program to grab jpeg images from VDR-Recordings. It's used inside xxv to generated preview images of recordings. http://www.deltab.de/index.php?option=com_content&task=view&id=26&Itemid=45 Enjoy, Andreas

1 0

streamdev & xine plugins
by Hazem Hamed 22 Jul '06

22 Jul '06

Hi list I have trouble setting my new notebook as vdr-streamdev client I have this setup server side P4 2.4 GHz processor 512 RAM twinhan budget dvb-s card Mandriva 10.1 with kernel updated to 2.6.16.9 vdr 1.3.41 xine plugin 0.7.6 streamdev cvs around may 2005 few other plugins client side Toshiba sattelite M70/340 centrino 1.73 GHz 512 RAM SUSE 10.1 vdr 1.3.41 xine plugin 0.7.6 streamdev cvs around may 2005 I run # vdr -Pxine -Pstreamdev-client SetVideoFormat: 0 SetAudioChannelDevice: 0 SetVolumeDevice: 255 SetPlayMode: 1 [vVMSetDigitalAudioDevice: 0 SetAudioChannelDevice: 0 aA+10+11+11] vdr-xine: Client connecting ... and on anther konsol window # xine --verbose=2 vdr:/tmp/vdr-xine/stream#demux:mpeg_pes xine: found demuxer plugin: Elementary MPEG stream demux plugin load_plugins: plugin dxr3-mpeg2 failed to instantiate itself. load_plugins: plugin mpeg2 will be used for video streamtype 00. av_offset=0 pts spu_offset=0 pts xine_play play_internal ...done video_out: throwing away image with pts 43718 because it's too old (diff : 4479). but I get no [video|sound|osd] here some logs # tail -f /var/log/messages vdr: [3970] initializing plugin: streamdev-client (0.3.3-pre3-geni): VTP Streaming Client vdr: [3970] setting primary device to 1 vdr: [3970] SVDRP listening on port 2001 vdr: [3970] loading /video/themes/sttng-default.theme vdr: [3970] starting plugin: xine vdr: [3970] starting plugin: streamdev-client vdr: [3970] reading EPG data from /video/epg.data vdr: [3970] loading /video/themes/sttng-default.theme vdr: [3970] ERROR: remote control XineRemote not ready! vdr: [3970] remote control KBD - learning keys vdr: [3976] streamdev-client: sections assembler thread started (pid=3970, tid=3976) vdr: [3977] section handler thread started (pid=3970, tid=3977) vdr: [3978] KBD remote control thread started (pid=3970, tid=3978) vdr: [3970] switching to channel 1 vdr: [3970] Streamdev: Connected to server 192.168.0.4:2004 using capabilities TSPIDS vdr: [3979] transfer thread started (pid=3970, tid=3979) vdr: [3980] receiver on device 6 thread started (pid=3970, tid=3980) vdr: [3981] TS buffer on device 6 thread started (pid=3970, tid=3981) vdr: [3979] setting audio track to 1 (0) # ll /tmp/vdr-xine/ total 0 prw-rw-rw- 1 root root 0 Jul 22 17:13 external.control prw-r--r-- 1 root root 0 Jul 22 17:13 external.result prw-r--r-- 1 root root 0 Jul 22 17:13 stream prw-r--r-- 1 root root 0 Jul 22 17:13 stream.control prw-rw-rw- 1 root root 0 Jul 22 17:13 stream.event prw-rw-rw- 1 root root 0 Jul 22 17:13 stream.result I've noticed that the modified time stamp for the 4 files stream* doesn't change over time I think it should change as when I use xine plugin on my server to watch locally sorry for my long post TIA --------------------------------------------- Free POP3 Email from www.Gawab.com Sign up NOW and get your account @gawab.com!!

1 0

SourceCaps for 1.4.0
by JikJikMan 22 Jul '06

22 Jul '06

Hi All, Where could I find right SourceCaps for vdr-1.4.0? I've tried SourceCaps for vdr-1.3.39 from BigPatch on 1.4.0 in every possible way, but it always reject all hunks in all files! John.

1 0

xineliboutput - no images
by Joerg Riechardt 22 Jul '06

22 Jul '06

Hi, when I try to display an image, I get: [input_vdr] PLAYFILE (Loop: 1, Offset: 0s, File: /video/pics/100B0041.JPG) [input_vdr] Error playing file ! (File not found ? Unknown format ?) [input_vdr] PLAYFILE <STOP>: Closing slave stream What could be the reason, and to make it work? Jörg

1 0

xineliboutput and fast forward/rewind
by Joerg Riechardt 22 Jul '06

22 Jul '06

Hi, when i play a recording and go into fast forward or fast rewind, the replay stops for a moment until it gets fluid again. Could this be improved? (With the xine plugin from Reinhard Nissl the same problem existed in some versions, but not in others.) Jörg

1 0

xineliboutput OSD problem
by Joerg Riechardt 22 Jul '06

22 Jul '06

Hi, I´m using xineliboutput and fbxine, both on the same machine with pipe modus. When I press a key on the remote control or send a svdrp command, that triggers OSD fbxine stops running and the picture freezes. If I restart fbxine immediately I see the error message: [input_vdr] exec_osd_command: Attempt to close non-existing OSD (0) ! [input_vdr] invalid parameter in control message OSDCMD What could I do to solve that? Jörg

1 1

device.c: cDevice::GetDevice
by syrius.ml＠no-log.org 22 Jul '06

22 Jul '06

Hi, let's consider this setup: - one headless computer, 2 dvb-s cards (1 ff, 1 budget) both receiving the exactly the same set of channels - this server runs 2 vdr instances: first main one with streamdev-server handling the dvb cards, the other one with streamdev-client - both of them are running vdr-xineliboutput plugin so that i can have 2 independant outputs(TV) plugged in. - main vdr is doing the recording and also being used a http stream server for one client (occasionnaly) The channels i'm using are those: :BBC BBC 1 London;BSkyB:10773:hC56:S28.2E:22000:5000:5001=eng,5002=NAR:5003:0:6301:2:2045:0 BBC 2 England;BSkyB:10773:hC56:S28.2E:22000:5100:5101=eng,5102=NAR:5103:0:6302:2:2045:0 BBC THREE;BSkyB:10773:hC56:S28.2E:22000:5200:5201=eng,5202=NAR:5203:0:6319:2:2045:0 BBC FOUR;BSkyB:10773:hC56:S28.2E:22000:5300:5301=eng,5302=NAR:5303:0:6316:2:2045:0 :ITV ITV1 Granada;BSkyB:10758:vC56:S28.2E:22000:2318:2319=eng:2320:0:10080:2:2044:0 ITV2;BSkyB:10758:vC56:S28.2E:22000:2314:2315=eng,2363=NAR:2317:0:10070:2:2044:0 ITV3;BSkyB:10906:vC56:S28.2E:22000:2363:2364=eng,2314=NAR:2365:0:10260:2:2054:0 ITV4;BSkyB:10758:vC56:S28.2E:22000:2305:2306=eng:2309:0:10072:2:2044:0 I have added esyslog("GetDevice(1) device #%d imp=%x ndr=%d isreceiving=%d isactual=%d isprimary=%d hasdecoder=%d devprio=%d Priority=%d providesca=%d\n",i,imp,ndr,device[i]->Receiving(),device[i]==ActualDevice(),device[i]->IsPrimaryDevice(),device[i]->HasDecoder(),device[i]->Priority(),Priority,device[i]->ProvidesCa(Channel)); before if (imp < Impact) { and added esyslog("GetDevice(2) device #%d SELECTED imp=%x\n",i,imp); before if (NeedsDetachReceivers) first (main) vdr tunes to bbc 1: it uses the budget card: Jul 4 00:33:24 dvb vdr: [22230] switching to channel 1 Jul 4 00:33:24 dvb vdr: [22230] GetDevice(1) device #0 imp=116202 ndr=0 isreceiving=0 isactual=0 isprimary=0 hasdecoder=1 devprio=-1 Priority=0 providesca=2 Jul 4 00:33:24 dvb vdr: [22230] GetDevice(2) device #0 SELECTED imp=116202 Jul 4 00:33:24 dvb vdr: [22230] INFO: Using software decryption on card 1 Jul 4 00:33:24 dvb vdr: [22230] GetDevice(1) device #1 imp=106202 ndr=0 isreceiving=0 isactual=0 isprimary=0 hasdecoder=0 devprio=-1 Priority=0 providesca=2 Jul 4 00:33:24 dvb vdr: [22230] GetDevice(2) device #1 SELECTED imp=106202 then second vdr is launched and tuned to bbc 2: it uses the ff card: Jul 4 00:37:05 dvb vdr: [22246] GetDevice(1) device #0 imp=116202 ndr=0 isreceiving=0 isactual=0 isprimary=0 hasdecoder=1 devprio=-1 Priority=0 providesca=2 Jul 4 00:37:05 dvb vdr: [22246] GetDevice(2) device #0 SELECTED imp=116202 Jul 4 00:37:05 dvb vdr: [22246] GetDevice(1) device #1 imp=146202 ndr=0 isreceiving=0 isactual=1 isprimary=0 hasdecoder=0 devprio=-1 Priority=0 providesca=2 Jul 4 00:37:06 dvb vdr: [22246] GetDevice(1) device #0 imp=116202 ndr=0 isreceiving=0 isactual=0 isprimary=0 hasdecoder=1 devprio=-1 Priority=0 providesca=2 Jul 4 00:37:06 dvb vdr: [22246] GetDevice(2) device #0 SELECTED imp=116202 Jul 4 00:37:06 dvb vdr: [22246] GetDevice(1) device #1 imp=146202 ndr=0 isreceiving=0 isactual=1 isprimary=0 hasdecoder=0 devprio=-1 Priority=0 providesca=2 Jul 4 00:37:06 dvb vdr: [22246] Streamdev: Setting data connection to 10.0.2.10:48025 How could I adapt GetDevice so that the second vdr would use the same card ? (bbc1 and bbc2 are on the same transponder) Because if i start a recording or the http client on itv1, one transfer mode is interrupted. It's obviously not what i want. I would have expected bbc1 and bbc2 to be handled by only one card letting the other one free for something else. in cDevice::GetDevice (device.c): imp <<= 1; imp |= !device[i]->Receiving() || ndr; could this be replaced by: imp |= ndr; are there cases where ndr is True and device[i]->Receiving() is false ? if device[i]->Receiving() and ndr is false i guess that would mean this device should be selected. (and maybe imp shouldn't be increased in that case) or/and what could i change in: imp <<= 1; imp |= device[i] == ActualDevice(); so that it doesn't increase imp if ActualDevice also provides the desired channel ? (or maybe this test could be skipped in that case ?) another ex: for a reason or another, 1st vdr tunes to bbc1 and uses first dvd card (the ff one) then second vdr wants to tune to bbc1 as well: unfortunatly the selected device is not the first one but the second one because it doesn't have a decoder. (and imp is unconditionnaly increased when the card has a decoder) I understand selecting the appropriate device is not that quite simple. Is there a way to make this selection more modular and add a new setting to select between different GetDevice behabiors ? --

3 4

Demux with two ac3 streams ?
by Gregoire Favre 22 Jul '06

22 Jul '06

Hello, could someone tell me how to demux vdr streams that contains two ac3 streams ? (If possible using command lign, I have tried with vdrsync.pl which result in vdrsync.pl crash, even with a diff from vdrportal and with projectx I get only one ac3 stream). Thank you very much, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org

1 0

← Newer
1
2
3
4
5
6
7
8
...
11
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr July 2006