vdr February 2009

vdr@linuxtv.org

76 participants
71 discussions

Re: [vdr] vdpau output to pal tv,
by Torgeir Veimo 19 Feb '09

19 Feb '09

> On 3 Feb 2009, at 00:58, Theunis Potgieter wrote: > > > There is a VGA -> RGB connector that you can assemble/buy. I've seen > > in the xorg.conf that you can still force your VGA out to run on > 50Hz, > > by disabling EDID on the nvidia xorg.conf Options. > > > Yes this is what I'll be trying, but I'll just get an nvidia component > breakout box, they're about $10 on ebay. It appears that the component output breakout cable still uses the … [View More]

6 14

Running script
by JJussi 18 Feb '09

18 Feb '09

Hi! This is maybe "too simple" question.. I have remote, and one of it's button is connected (in lircd.conf) to word 'AppExit'. How I can connect shell script to that? What I want to do is run script what kills vdr-sxfe and start it again... I know how to connect vdr-pluging to it.. But script? NO! -- JJussi

2 1

Re: [vdr] Small VDR-streamdev patch for Popcorn Hour NMT
by Tomáš Skočdopole 18 Feb '09

18 Feb '09

2009/2/17 Goga777 <goga777(a)bk.ru>: > Приветствую, Tomáš > > can you watch hdtv channels on Popcorn with vdr 174 ? > > > >> Hi, >> >> I want to ask you about actual state of streamdev-server for NMT >> Popcornhour (A-110). >> I have vdr-1.7.0 and streamdev-0.3.4 with patch patpmt_first_v5.diff. >> >> Streamimg to Popcornhour is practically O.K. (without image failure), >> but sometimes popcornhour freezes and hard restart … [View More]

4 4

vdr 1.7.4 + streamdev + Popcorn ???
by Goga777 17 Feb '09

17 Feb '09

Hi could someone to run the streaming with vdr 174 + streamdev-plugin for popcorn Goga

2 3

Streamdev Server and the Mediagate 800
by Hawes, Mark 16 Feb '09

16 Feb '09

>> The MG 800 successfully plays streamed content from the internet, >> but has problems with a stream from the streamdev server. >> The URL I am using from the player is identical to one that >> mplayer can play, e.g. 'http://192.168.0.4:3000/1'. >PCH is not very good on recognizing media formats on FOURCC codes. So it >needs URL with correct prefix. >So could you check with URL and report: >http://192.168.0.4:3000/TS/1.ts >Above URL is … [View More]

1 0

XXV and missing epg data
by Matti Ropo 15 Feb '09

15 Feb '09

Hi I am using xxv with my vdr, but lately there has been strange problem. Couple of channels are missing most of the EPG data. Same data is in the vdr epg file, but does not appear in xxv. I have tried to look some erros from log file but haven't found any error messages. This was what I did found: 853 (200) [2009-02-12 20:39:37] EPG: Compare EPG Database with data from vdr : 55 / 181 for channel 'Sub' - C-0-2-97 If I have understood correctly number 55 refers to programs in xxv … [View More]

3 6

[ANNOUNCE] Plugin: devstatus 0.4.0
by Walter Koch 14 Feb '09

14 Feb '09

Moin, This simple plugin displays the status of all available dvb devices. This could in case of driver problems. It should works with vdr 1.6.x and maybe 1.7.x, but not with 1.5.x or earlier. For every dvb device known to vdr it shows * its type (DVB-T, DVB-C (not tested), DVB-S) * its name * its /dev path (/dev/dvb/adapter*) * its current recordings with their start time and title. Selecting a recording and pressing 'ok' starts it for timeshift viewing. Press the red key to … [View More]toggle the recordings display. * the channels the device is currently tuned to. The provider of every channel is also shown. The live channel is marked with a plus sign. Crypted channels are marked with a "x". There are also marks for radio channels ("r"), tv channels ("t"), video only channels ("v") and payload free channels("?"). The channels are selectable; pressing OK switches to this channel (without exiting the plugin). Pressing the keys "7" or "9" will change to the closest transponder with lower or higher frequency. Attention: This will break a current recordind on this device! Press the yellow key to show/hide this channel display. * the signal strength and the signal / noise ratio of the device. Note: Some dvb device driver do not provide this info. Press the green key to toggle the signal display. Press the blue key to refresh the screen (and thus the values) * The device which delivers the live view is marked with the text "live" * the settings are retained between sessions * there is also a small setup page This plugin is heavily based on the recstatus plugin by Christian Wieninger and Mike Constabel (<http://www.constabel.net/vdr/plugins.de.htm>). Joe_D at vdr-portal.de implemented the automatic repaint of the screen as soon as channel are switched or recording starts or stops. Thanks. I used also some code from the femon plugin (http://www.saunalahti.fi/~rahrenbe/vdr/femon/). Example OSD output: Device status --- Device 1 (device with decoder, primary device) --- satellite card (ST STV0299 DVB-S) - /dev/dvb/adapter0/frontend0 frequency: 12070 MHz, signal: 65%, s/n: 81% currently no recordings 1045 t x PREMIERE START (PREMIERE) 3080 t x TNT SERIE (PREMIERE) 3133 t x BLUE MOVIE Extra () 3134 t x BLUE MOVIE Gay () 3135 t x BLUE MOVIE () 3326 t x GOLDSTAR TV (PREMIERE) 3337 t x HEIMATKANAL (PREMIERE) 3342 t x HIT24 (PREMIERE) 3468 t x RTL CRIME (PREMIERE) 3471 t x RTL PASSION (PREMIERE) 3684 r x P-60ER/70ER (PREMIERE) 3685 r x P-80ER/90ER (PREMIERE) 3686 r x P-COUNTRY (PREMIERE) 3687 r x P-DEUTSCHE CHARTS (PREMIERE) 3689 r x P-LOVE SONGS (PREMIERE) 3690 r x P-RnB/HIP HOP (PREMIERE) 3691 r x P-ROCK HYMNEN (PREMIERE) --- Device 2 -- Live --- terrestrial card (Philips TDA10045H DVB-T) - /dev/dvb/adapter1/frontend0 frequency: 706 MHz, signal: 80%, s/n: 99% currently no recordings 101 t + Das Erste (ARD) 104 t arte (ARD) 118 t EinsFestival (ARD) 120 t Phoenix (ARD) --- Device 3 --- terrestrial card (Afatech AF9013 DVB-T) - /dev/dvb/adapter2/frontend0 frequency: 746 MHz, signal: 100%, s/n: 0% currently no recordings 107 t SAT.1 (ProSiebenSat.1) 108 t ProSieben (ProSiebenSat.1) 109 t kabel eins (ProSiebenSat.1) 121 t N24 (ProSiebenSat.1) no recordings no strength no channels Refresh display Example SVDRP-Session: PLUG devstatus 214-Plugin devstatus v0.3.0 - Status of dvb devices 214-SVDRP commands: 214- DEVSTAT RECNUMBER 214 End of HELP info PLUG devstatus RECNUMBER 900-Number of concurrent recordings: 900- Device 1: 0 900- 900- Device 2: 0 900 PLUG devstatus DEVSTAT 900-List of DVB devices: 900- --- Device 1 (device with decoder, primary device) ---: 900- currently no recordings 900- 900- --- Device 2 ---: 900- currently no recordings 900 Gruss, Walter -- Die Gedanken sind frei. Auschnahme regelt ein Bundeschgesetz. [View Less]

1 1

Re: [vdr] why I must first compile xine-lib?not ffmpeg?
by LinHai 14 Feb '09

14 Feb '09

LinHai kirjoitti:> when I first compile xine-lib is OK?second compile ffmpeg is OK.>> IF I first compile ffmpeg is OK?second compile xine-lib is failure.>> the syslog:>> make[2]: *** [xineplug_decode_faad_la-xine_faad_decoder.lo] Error 1>> make[2]: Leaving directory `/root/xine-lib-1-2-926ee2edf0d8/src/audio_dec'>> make[1]: *** [all-recursive] Error 1>> make[1]: Leaving directory `/root/xine-lib-1-2-926ee2edf0d8/src'>> make: *** [all-recursive] Error … [View More]

3 2

rotor and vdr
by Goga777 14 Feb '09

14 Feb '09

Hi is there any working solution for moving of rotor with vdr ? Goga

4 7

OSD on the 2nd FF-Card possible??
by Alfred Zastrow 13 Feb '09

13 Feb '09

Hello all, is there a way to display the OSD-Menue additionly on the 2nd FF-Card? The background for this question is, that I want to use the mp3-funtion of my vdr with a small 7"-LCD-monitor instead of the big tv-set. best regards Alfred

3 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr February 2009