vdr November 2011

vdr@linuxtv.org

37 participants
45 discussions

Re: [vdr] xine dropped frames warning
by Arturo Martinez 22 Nov '11

22 Nov '11

With gui.dropped_frames_warning:0 in the config file (which was added while xine was not running) I still get a popup if I use the OSD for a minute or so See screenshot: http://dl.dropbox.com/u/9975371/IMG_20111122_124523.jpg So since the line does not truly disable warnings for me, my question still remains valid. Is there a different line I need to put in the config file or else how can I mod the source code to make the warnings invisible?

3 2

Re: [vdr] xine dropped frames warning
by Arturo Martinez 21 Nov '11

21 Nov '11

You assumed incorrectly. I killed xine and edited the file while xine was not running. in fact the line gui.dropped_frames_warning:0 is now permanently in the config file but still I get the notifications (or at least some of them) Nobody reading these lines knows what part of xine´s source code do I need to murder to get rid of the notifications once and for all ? wrote: > > I have added > > > > > > gui.dropped_frames_warning:0 > > > > but still if the … [View More]

2 1

[ANNOUNCE] VDRAdmin-AM v3.6.9
by Andreas Mair 21 Nov '11

21 Nov '11

Hi, version 3.6.8 of VDRAdmin-AM has been released. You can get it from http://andreas.vdr-developer.org/vdradmin-am/ Have fun! Andreas *** Changes from v3.6.8 to v3.6.9 *** - Added: Support changed SVDRP LSTR output of VDR >= 1.7.21. - Fixed: --log 0 command line argument. - Improved: Startup error messages on module load failures. - Added: -L/--logfile command line arg for overriding config. - Changed: Honor config logging options with --nofork. - Changed: Specifying -L or -l … [View More]

1 0

[PATCH] Fix crash when deleting a recording while cutting it.
by Ville Skyttä 20 Nov '11

20 Nov '11

--- cutter.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/cutter.c b/cutter.c index 778302b..95b661d 100644 --- a/cutter.c +++ b/cutter.c @@ -100,7 +100,8 @@ void cCuttingThread::Action(void) if (fromIndex->Get(Index++, &FileNumber, &FileOffset, &Independent, &Length)) { if (FileNumber != CurrentFileNumber) { fromFile = fromFileName->SetOffset(FileNumber, FileOffset); - fromFile-… [View More]

1 0

xine dropped frames warning
by Arturo Martinez 20 Nov '11

20 Nov '11

I have added gui.dropped_frames_warning:0 but still if the system gets stressed I get a warning box Some xine dev knows by any chance how to remove xine´s ability to display warning boxes or to make them of size 0x0 pixels ? On Sat, Nov 19, 2011 at 7:04 AM, Arturo Martinez wrote: > This works well but ocassionally the system is busy and I get a warning > that too many frames have been dropped > > > Is there some way I can make sure I get no such warnings? > The PC has … [View More]

2 1

VDR and Hybrid DVB Cards ( was "HVR 4000 drivers broken - adapter0/frontend1 busy" in linux-media list )
by Hawes, Mark 19 Nov '11

19 Nov '11

Lars, Thanks for the reply. Output of ls -la /dev/dvb/adapter0: root@Nutrigrain:/home/digitalTV/vdr-1.7.21# ls -la /dev/dvb/adapter0/* crw-rw---- 1 root video 212, 1 Nov 14 19:20 /dev/dvb/adapter0/demux0 crw-rw---- 1 root video 212, 5 Nov 14 19:20 /dev/dvb/adapter0/demux1 crw-rw---- 1 root video 212, 2 Nov 14 19:20 /dev/dvb/adapter0/dvr0 crw-rw---- 1 root video 212, 6 Nov 14 19:20 /dev/dvb/adapter0/dvr1 crw-rw---- 1 root video 212, 0 Nov 14 19:20 /dev/dvb/adapter0/frontend0 crw-rw---- 1 root … [View More]video 212, 4 Nov 14 19:20 /dev/dvb/adapter0/frontend1 crw-rw---- 1 root video 212, 3 Nov 14 19:20 /dev/dvb/adapter0/net0 crw-rw---- 1 root video 212, 7 Nov 14 19:20 /dev/dvb/adapter0/net1 root@Nutrigrain:/home/digitalTV/vdr-1.7.21# As you can see there is a demux1 and dvr1 but all hung off adapter0 which is presumably the problem. I actually want to use both the DVB-S2 and the DVB-T frontends, though not concurrently. Happy to work with you on developing the required patch. If as you suggest that this is actually a VDR problem then I'll also post this reply in the VDR mailing list and we can take it from there. Regards, Mark. -----Original Message----- From: linux-media-owner(a)vger.kernel.org [mailto:linux-media-owner@vger.kernel.org] On Behalf Of L. Hanisch Sent: Tuesday, 15 November 2011 5:35 AM To: linux-media(a)vger.kernel.org Subject: Re: HVR 4000 drivers broken - adapter0/frontend1 busy Hi, Am 14.11.2011 04:14, schrieb Hawes, Mark: > Hi, > > I have just acquired a Hauppauge HVR 4000 hybrid DVB-S2 / DVB-T / > Analogue card > which I am trying to use with VDR 1.7.21 on the latest Slackware stable release > using kernel 2.6.37.6. vdr doesn't know anything about hybrid cards where you can access only one frontend at the same time. On startup vdr opens all frontends, so when accessing the second one this is blocked. Since I don't know this card exactly, what devices does it create? Is there also a demux[01] and dvr[01] or just a demux0 and dvr0? Which frontend do you want to use? For now you have to choose one and start vdr with the "-D" parameter to tell it which to use. If there's no demux1 and dvr1 and you want to use frontend1 you'll have the next problem since vdr asumes that every frontend has its own demux/dvr. I wrote a patch, so vdr uses demux0 with frontend1. http://linuxtv.org/pipermail/vdr/2011-November/025411.html Soon I will have some DVB-C/T hybrid device so I will try to extend the patch so both frontends can be used (not at the same time of course). It would be nice if you can send me the output of "ls -la /dev/dvb/adapter0/*". I don't know exactly what the dvb/v4l spec is saying about hybrid devices and how they should expose their capabilities but it seems to me there's some discussion about this topic from time to time. After all this is a problem at application level, not driver level. If I'm wrong please correct me. And maybe you want to read the vdr mailing list... Regards, Lars. > > The drivers seem to detect the card OK as seen in dmesg output: > > [ 7.501729] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded > [ 7.503174] cx88[0]: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2 > [ 7.503373] cx88[0]: TV tuner type 63, Radio tuner type -1 > [ 7.551718] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 7.551788] i915 0000:00:02.0: setting latency timer to 64 > [ 7.564218] i915 0000:00:02.0: irq 41 for MSI/MSI-X > [ 7.564399] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 7.564825] [drm] initialized overlay support > [ 7.579830] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded > [ 7.583007] No connectors reported connected with modes > [ 7.583077] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 7.588874] Console: switching to colour frame buffer device 128x48 > [ 7.591121] fb0: inteldrmfb frame buffer device > [ 7.591144] drm: registered panic notifier > [ 7.591174] No ACPI video bus found > [ 7.591316] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 > [ 7.617097] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner > [ 7.702578] IR RC5(x) protocol handler initialized > [ 7.728589] IR RC6 protocol handler initialized > [ 7.730628] cx2388x alsa driver version 0.0.9 loaded > [ 7.746096] IR JVC protocol handler initialized > [ 7.749962] IR Sony protocol handler initialized > [ 7.918601] IR MCE Keyboard/mouse protocol handler initialized > [ 7.980484] lirc_dev: IR Remote Control driver registered, major 243 > [ 7.994039] IR LIRC bridge handler initialized > [ 7.994767] tda9887 15-0043: creating new instance > [ 7.994795] tda9887 15-0043: tda988[5/6/7] found > [ 7.995608] tuner 15-0043: Tuner 74 found with type(s) Radio TV. > [ 7.997560] tuner 15-0061: Tuner -1 found with type(s) Radio TV. > [ 8.035897] tveeprom 15-0050: Hauppauge model 69009, rev B2D3, serial# 3313260 > [ 8.035934] tveeprom 15-0050: MAC address is 00:0d:fe:32:8e:6c > [ 8.035965] tveeprom 15-0050: tuner model is Philips FMD1216MEX (idx 133, type 78) > [ 8.036005] tveeprom 15-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) > [ 8.036055] tveeprom 15-0050: audio processor is CX882 (idx 33) > [ 8.036085] tveeprom 15-0050: decoder processor is CX882 (idx 25) > [ 8.037240] tveeprom 15-0050: has radio, has IR receiver, has no IR transmitter > [ 8.038391] cx88[0]: hauppauge eeprom: model=69009 > [ 8.042759] tuner-simple 15-0061: creating new instance > [ 8.043910] tuner-simple 15-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner) > [ 8.087006] Registered IR keymap rc-hauppauge > [ 8.088273] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:03:00.2/rc/rc0/input6 > [ 8.089502] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:03:00.2/rc/rc0 > [ 8.090743] input: MCE IR Keyboard/Mouse (cx88xx) as /devices/virtual/input/input7 > [ 8.092315] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0 > [ 8.093521] cx88[0]/2: cx2388x 8802 Driver Manager > [ 8.094694] cx88-mpeg driver manager 0000:03:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 8.095882] cx88[0]/2: found at 0000:03:00.2, rev: 5, irq: 19, latency: 64, mmio: 0xfc000000 > [ 8.097825] cx8800 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 8.099081] cx88[0]/0: found at 0000:03:00.0, rev: 5, irq: 19, latency: 64, mmio: 0xfa000000 > [ 8.112941] WARNING: You are using an experimental version of the media stack. > [ 8.112943] As the driver is backported to an older kernel, it doesn't offer > [ 8.112944] enough quality for its usage in production. > [ 8.112945] Use it with care. > [ 8.112945] Latest git patches (needed if you report a bug to linux-media(a)vger.kernel.org): > [ 8.112946] e9eb0dadba932940f721f9d27544a7818b2fa1c5 [media] V4L menu: add submenu for platform devices > [ 8.112947] 1df3a2c6d036f4923c229fa98725deda320680e1 [media] cx88: fix menu level for the VP-3054 module > [ 8.112948] 486eeb5628f812b4836405e2b2e76594287dd873 [media] V4L menu: move all PCI(e) devices to their own submenu > [ 8.197600] wm8775 15-001b: chip found @ 0x36 (cx88[0]) > [ 8.211895] cx88/2: cx2388x dvb driver version 0.0.9 loaded > [ 8.213155] cx88/2: registering cx8802 driver, type: dvb access: shared > [ 8.213801] cx88[0]/0: registered device video0 [v4l2] > [ 8.213847] cx88[0]/0: registered device vbi0 > [ 8.213891] cx88[0]/0: registered device radio0 > [ 8.215082] cx88_audio 0000:03:00.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 8.215106] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards > [ 8.220763] cx88[0]/2: subsystem: 0070:6902, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68] > [ 8.222053] cx88[0]/2: cx2388x based DVB/ATSC card > [ 8.223339] cx8802_alloc_frontends() allocating 2 frontend(s) > [ 8.272844] tuner-simple 15-0061: attaching existing instance > [ 8.274126] tuner-simple 15-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead > [ 8.279264] DVB: registering new adapter (cx88[0]) > [ 8.280558] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)... > [ 8.282871] DVB: registering adapter 0 frontend 1 (Conexant CX22702 DVB-T)... > [ 8.423842] Adding 1954444k swap on /dev/sda2. Priority:-1 extents:1 across:1954444k > [ 8.503564] fuse init (API version 7.15) > [ 9.184585] EXT4-fs (sda1): re-mounted. Opts: (null) > [ 9.308820] EXT4-fs (sda1): re-mounted. Opts: (null) > [ 9.581725] lp0: using parport0 (interrupt-driven). > [ 9.583036] lp0: console ready > [ 14.900540] ATL1E 0000:01:00.0: irq 42 for MSI/MSI-X > [ 20.345506] ATL1E 0000:01:00.0: eth0: NIC Link is Up<10 Mbps Full Duplex> > [ 29.618702] NET: Registered protocol family 10 > [ 29.618871] lo: Disabled Privacy Extensions > [ 40.210009] eth0: no IPv6 routers present > [ 308.497672] start_kdeinit (2104): /proc/2104/oom_adj is deprecated, please use /proc/2104/oom_score_adj instead. > [ 313.497259] ata3.00: configured for UDMA/133 [ 313.497262] ata3: > EH complete [ 314.195827] EXT4-fs (sda1): re-mounted. Opts: commit=0 > > However, VDR is only able to use the first of the two frontends, reporting that the second frontend (DVB/T) is busy: > > Nov 13 20:04:06 Nutrigrain vdr: [2426] VDR version 1.7.21 started Nov > 13 20:04:06 Nutrigrain vdr: [2426] codeset is 'ISO-8859-1' - known Nov > 13 20:04:06 Nutrigrain vdr: [2426] found 28 locales in ./locale Nov 13 > 20:04:06 Nutrigrain vdr: [2426] loading plugin: > ./PLUGINS/lib/libvdr-sc.so.1.7.21 Nov 13 20:04:06 Nutrigrain vdr: > [2426] cTimeMs: using monotonic clock (resolution is 1 ns) Nov 13 > 20:04:06 Nutrigrain vdr: [2426] loading plugin: > ./PLUGINS/lib/libvdr-rotor.so.1.7.21 > Nov 13 20:04:06 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/setup.conf Nov 13 20:04:07 Nutrigrain vdr: [2426] unknown locale: '0' > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/sources.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/diseqc.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/channels.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/timers.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/commands.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/svdrphosts.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/remote.conf > Nov 13 20:04:07 Nutrigrain vdr: [2426] loading > /home/digitalTV/config/keymacros.conf > Nov 13 20:04:07 Nutrigrain vdr: [2427] video directory scanner thread > started (pid=2426, tid=2427) Nov 13 20:04:07 Nutrigrain vdr: [2428] > video directory scanner thread started (pid=2426, tid=2428) Nov 13 > 20:04:07 Nutrigrain vdr: [2426] reading EPG data from > /home/digitalTV/video/epg.data Nov 13 20:04:07 Nutrigrain vdr: [2427] > video directory scanner thread ended (pid=2426, tid=2427) Nov 13 20:04:07 Nutrigrain vdr: [2428] video directory scanner thread ended (pid=2426, tid=2428) Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'A - ATSC' > Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'C - DVB-C' > Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'S - DVB-S' > Nov 13 20:04:07 Nutrigrain vdr: [2426] registered source parameters for 'T - DVB-T' > Nov 13 20:04:07 Nutrigrain vdr: [2426] probing > /dev/dvb/adapter0/frontend0 Nov 13 20:04:07 Nutrigrain vdr: [2426] new > device number 1 Nov 13 20:04:12 Nutrigrain vdr: [2426] frontend 0/0 > provides DVB-S2 with QPSK ("Conexant CX24116/CX24118") Nov 13 20:04:12 > Nutrigrain vdr: [2431] tuner on frontend 0/0 thread started (pid=2426, > tid=2431) Nov 13 20:04:12 Nutrigrain vdr: [2432] section handler > thread started (pid=2426, tid=2432) Nov 13 20:04:17 Nutrigrain vdr: > [2426] ERROR: /dev/dvb/adapter0/frontend1: Device or resource busy Nov > 13 20:04:17 Nutrigrain vdr: [2426] found 1 DVB device > > I initially tried using the stock drivers that came with 2.6.37.6 which is where I first experienced the problem. I then tried the latest s2-liplianin- f5cd7d75370e drivers and finally (in the example above) the latest v4l-dvb drivers, all of which exhibit the same problem. I have also tried to use the mfe drivers from November 2008 but could not get them to compile. > > Any assistance in resolving this issue would be much appreciated. > > Thanks, > > Mark Hawes. > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" > in the body of a message to majordomo(a)vger.kernel.org More majordomo > info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html [View Less]

7 25

xine dropped frames warning
by Arturo Martinez 19 Nov '11

19 Nov '11

Hello, I lauch xine with this line: xine --no-gui --no-logo --no-splash -pq -A alsa -f -V xxmc --post vdr --post vdr_video --post tvtime:method=Greedy2Frame,enabled=1,pulldown=vektor,framerate_mode=full,judder_correction=0,use_progressive_frame_flag=0,chroma_filter=0,cheap_mode=0 --config=/home/config vdr://tmp/vdr-xine/stream#demux:mpeg_pes This works well but ocassionally the system is busy and I get a warning that too many frames have been dropped In my /home/config file I have: engine.… [View More]

2 1

Re: [vdr] femon request; historic data
by Rolf Ahrenberg 18 Nov '11

18 Nov '11

On Fri, 11 Nov 2011, Torgeir Veimo wrote: > Am wondering if it would be hard to enhance the femon plugin to show a > graph of signal quality and correction statistics? > > Basically, a histogram with STR, SNR, BER and UNC, so that one doesn't > have to oogle the screen constantly to see how signal quality changes. > > Even better if it was possible to trigger such monitoring without the > femon display showing. It should be more feasible to utilize the original command … [View More]

2 1

xineliboutput problem
by Scott Waye 17 Nov '11

17 Nov '11

Hi, I upgraded my xinelib-1.2 to the latest from hg, recompiled xineliboutput and its frontends and now vdr-sxfe will not start. I get this in the log: Nov 17 22:56:26 giradot vdr-sxfe[6256]: [6256] [scrnsaver] Error: The name org.gnome.ScreenSaver was not provided by any .service files Nov 17 22:56:26 giradot vdr-sxfe[6256]: [6256] [xine-vo ] wire_video_driver() FAILED (vo_driver != vos_driver) Nov 17 22:56:26 giradot kernel: vdr-sxfe[6256]: segfault at 0 ip (null) sp 00007fffa201d2b8 … [View More]

1 0

Dorcel TV + 5 other channels in 13E
by Arturo Martinez 16 Nov '11

16 Nov '11

Hi, I am considering to buy this card: http://www.smartcard24.com/dorcel-tv-+-freex-5-kanaele-12-monate-viaccess-a… But I am concerned that although I have a strong signal I can not scan those channels. Does anybody have a channels.conf with those channels in it, so I can check I get a lock ?

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr November 2011