vdr

vdr@linuxtv.org

2 participants
6731 discussions

vdr-sxfe crashing all the time
by Mr. Tux 20 May '10

20 May '10

Hello Martti Please add the following two lines in ~./.xine/config to enable OSD with opengl: video.driver:opengl video.output.opengl_renderer:2D_Tex then restart vdr for changes to take effect > > Date: Mon, 03 May 2010 17:19:31 +0300 > From: Martti Kuparinen <martti.kuparinen(a)iki.fi> > Subject: Re: [vdr] vdr-sxfe crashing all the time > > 02.05.2010 21:55, Halim Sahin kirjoitti: >> Hi, >> Try the opengl driver with fglrx (not xv!). > > It starts but I don't see the OSD and I noticed this warning >

3 2

xineliboutput teletext streaming
by Newsy Paper 20 May '10

20 May '10

Hi, Is there a way to stream teletext plugin with xineliboutput so that you can use the teletext function of vlc, as vlc offers teletext level 2.5. Or will vdr prevent streaming of teletext pid? kind regards Newspaperman

2 2

unicable patch from vdrportal.de
by Eddi De Pieri 17 May '10

17 May '10

Hi, Have you seen this patch? http://www.vdrportal.de/board/thread.php?threadid=89731&sid=529f3f9e990d7bf… by adjusting unicable.conf, it works for me... with inverto lnb scr Regards and many thanks to "*fds2001<http://www.vdrportal.de/board/profile.php?userid=25037&sid=a61beff62ad61c08…> *"

2 1

dvb-s2 transponder can be received but channels are not automatically found
by Newsy Paper 16 May '10

16 May '10

hi! I noticed a new vdr problem concerning only some of those dvb-s2 transponders. If I create a new channel in channel list with these transponder datas and "add new channels" is activated in vdr settings nothing happens either. But when I set manually SID manually video + audio pids are found automatically but not the other channels on that transponders are added automatically. One of these problem transponders is 12129 V 27500 5/6 DVB-S2 on Astra 23.5°East. kind regards Newspaperman

2 6

Re: [vdr] xineliboutput - choppy problem
by Jiri Dobry 16 May '10

16 May '10

Hello, I has similar problem with jerky video on vdpau. After some investigation I hope that I found solution. I was try increase volume of output surfaces. In file xine-lib-1.2/src/video_out/video_out_vdpau.c change line: #define NOUTPUTSURFACE 2 I am trying value 6 and it is perfect on nVidia G100 or G130 graphic, and almost perfect on 8300/shared I can confirm it on 3 machines, and I have confirmation from 2 other people. Jiri

1 0

Re: [vdr] xineliboutput - choppy problem
by Scott Waye 15 May '10

15 May '10

Have you tried with the CPU governor turned off? I know you said the CPU is not busy, but worth elimninating. Scott Sent from my HTC ----- Reply message ----- From: "Jiri Jansky" <janskj1(a)fel.cvut.cz> Date: Sat, May 15, 2010 22:12 Subject: [vdr] xineliboutput - choppy problem To: "VDR Mailing List" <vdr(a)linuxtv.org> My problem isn't VDPAU related, because I have same no smooth playing with XV output too. (I tested pal mpeg2 television stations without postprocessing and i used about 20% on my pentium4). Halim Sahin napsal(a): > hi, > Make sure that your vdpau is working. > Have installed the xinelib-1.2-vdpau branch? > To check if you have vdpau run > vdr-xfe --video > you have the right info and the last two lines: > Available video drivers: dxr3 aadxr3 xv raw opengl xshm none sdl fb > Available audio drivers: pulseaudio alsa oss esd none file > > Your machine should list vdpau as well (I dont have it). > > You can download the right xinelib with vdpau support from hg with this command: > hg clone http://hg.debian.org/hg/xine-lib/xine-lib-1.2-vdpau > HTH. > Halim > _______________________________________________ vdr mailing list vdr(a)linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

1 0

xineliboutput - choppy problem
by Jiri Jansky 15 May '10

15 May '10

Hi, I bought nvidia g210 (with vdpau support) and would like use it as video output device with VDR. I installed nvidia driver and mplayer plays all videos well both with VDPAU or XV. I never using xineliboutput plugin before, because I had DXR3 card and it seems it's run better with DXR3 VDR plugin. So, I began from scratch. I installed xinelib-1.2 into system and xinelibplugin into VDR. But result dosn't look good. I have many problems, but most significant is jerky video in few second after channel switch and in from time to time after it. In logs, I'am getting messages like this: video_out: throwing away image with pts 2920558 because it's too old (diff : 5694). video_out: throwing away image with pts 2974558 because it's too old (diff : 6457). video_out: throwing away image with pts 3028558 because it's too old (diff : 7171). 200 frames delivered, 0 frames skipped, 5 frames discarded I googled it, but nothing usefull found. I tested it on MPEG2 PAL television station with xineliboutput both with XV and VDPAU (processor is pentium4(a)2.8GHz) with same result. So can anybody help me with my problem? Is any solution of it? How set it up you? (I run vdr in play X server....) Thanks Jiri Jansky

4 4

vdr 1.7.10 no record channel
by Senufo 14 May '10

14 May '10

Hi, I found the problem. VDR does not detect the frame independent in this stream because in the function : cFrameDetector:: Analyze (const uchar * Data, int Length) in the file remux.c. ((Data [i +2]>> 3) & 0x07) is equal to 0 instead of 1 for stream that work. I applied this patch : --- remux.c 2010-05-04 14:55:50.000000000 +0200 +++ remux.c.orig 2010-05-04 21:57:38.000000000 +0200 @@ -960,6 +960,7 @@ return Processed; // flush everything before this new frame newFrame = true; independentFrame = ((Data[i + 2] >> 3) & 0x07) == 1; // I-Frame + if (((Data[i + 2] >> 3) & 0x07) == 0) { independentFrame = 1;} if (synced) { if (framesPerPayloadUnit <= 1) scanning = false; and record is working again. I do not know what has changed in the stream. I tested this patch since yesterday and so far I have not had any problems. What do you think? Senufo

2 1

ANNOUNCE vdr-ttxtsubs 0.2.2 for VDR 1.7.13
by Tobi 08 May '10

08 May '10

A maintenance release that mainly fixes a problem with live subtitles on systems with FF cards, where the DVB card might not be in transfer mode. The changes: * Fixed channel retune triggering in VDR patch and updated patch to 1.7.14 (Dropped 1.7.12 and 1.7.13 patch) * Got rid of the background thread * Fixed live TV subtitles on FF cards, where there is no transfer mode * Updated README and TROUBLESHOOTING (Closes #323) * Increased internal frame buffer and log buffer overflows (Closes #295) As always: Any help is welcome! Development site: http://projects.vdr-developer.org/projects/show/plg-ttxtsubs Downloads: http://projects.vdr-developer.org/projects/list_files/plg-ttxtsubs Git-Web: http://projects.vdr-developer.org/git/?p=vdr-plugin-ttxtsubs.git Anonymous Git-access : git://projects.vdr-developer.org/vdr-plugin-ttxtsubs.git I've revived the VDR patch repsitory, so yo can find the ttxtsubs patch for VDR also in: git://projects.vdr-developer.org/vdr-patches.git ...which is based on: git://projects.vdr-developer.org/vdr.git This is intended to be a community maintained project! Don't expect me to fix your problems, I'm merely maintaining the project! Please report any bugs, ideas or feature requests to the project site (no registration required for this!). If you want to contribute patches, new features or whatever, post an issue or patch to the projects issue tracker or request to join the project. I would happily add everyone as a project member, who would like to contribute to the project! Tobias

1 1

Re: [vdr] dvb-s2 transponder can be received but channels are not automatically found
by Newsy Paper 07 May '10

07 May '10

sorry, one more thing to mention: I just deleted all those channels on that frequency. Ned3 HD Film1 HD Sport1 HD were automatically added but the other were not. kind regards Newspaperman --- Newsy Paper <newspaperman_germany(a)yahoo.com> schrieb am Fr, 7.5.2010: > Von: Newsy Paper <newspaperman_germany(a)yahoo.com> > Betreff: dvb-s2 transponder can be received but channels are not automatically found > An: vdr(a)linuxtv.org > Datum: Freitag, 7. Mai, 2010 09:45 Uhr > hi! > > I noticed a new vdr problem concerning only some of those > dvb-s2 transponders. > If I create a new channel in channel list with these > transponder datas and "add new channels" is activated in vdr > settings nothing happens either. But when I set manually SID > manually video + audio pids are found automatically but not > the other channels on that transponders are added > automatically. > > One of these problem transponders is 12129 V 27500 5/6 > DVB-S2 on Astra 23.5°East. > > kind regards > > Newspaperman > > >

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr