vdr

vdr@linuxtv.org

6731 discussions

Howto set dvb capability in vdr
by Mr. Tux 30 Apr '09

30 Apr '09

My dvb-t usb device (TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1) works well with vdr 1.6.0-2, but it can't handle more than one channel at once properly. If I record a channel and tune to a second channel on the same frequency, this will cause artefacts in the recording or in live display of the second channel. How do I change vdr detection of this device, so vdr knows it can only replay/record one channel at once? Is there a patch available already? Vdr should change to the recording channel and lock it during the recording (usefull if someone tries to switch channel by mistake). I do have others dvb device installed in my vdr system - whatever changes I apply should not affect them. Thanks and greetings Mr Tux _________________________________________________________________ http://redirect.gimas.net/?n=M0904xIE8_MSN4 Internet Explorer 8 jetzt für MSN - kostenlos!

1 0

Re: [vdr] VDR feature request: GotoStoredPosition
by martinez＠embl.de 29 Apr '09

29 Apr '09

To enable/disable GotoStoredPosition we would need a setting (on/off) on the Diseqc setup menu If on, then in diseqc.conf commands like are sent to the rotor: S19.2E 11700 V 9750 t W15 [E0 31 6B 01] W15 v t S19.2E 99999 V 10600 t W15 [E0 31 6B 01] W15 v T S19.2E 11700 H 9750 t W15 [E0 31 6B 01] W15 V t S19.2E 99999 H 10600 t W15 [E0 31 6B 01] W15 V T (the syntax is E0 header, 31 first rotor, 6B = gotostored position So If gotostoredposition is ON and the third byte of the diseqc 1.2 command is 6B then issue the command, otherwise block it

3 2

Best practices for running vdr-xine
by lucian orasanu 28 Apr '09

28 Apr '09

Ok more detalies. vdr-1.7.6 vdr-xine-1.9.1 on an gentoo distro and i start xine from .xinitrc like this: /usr/bin/xine -V vdpau -f -pq -A alsa --post vdr_video --post vdr_audio vdr://tmp/vdr-xine/stream#demux:mpeg_pes and for mplayer ihave this on mplayer.sh #!/bin/sh CMDLINE="mplayer -fs -vo vdpau -ao alsa -cache 4096 -slave -nolirc -quiet" DISPLAY=:0.0 $CMDLINE "$1" |logger exit but I have an question for others too! how to make mplayer to load subtitles from media or video directory?

2 1

(no subject)
by lucian orasanu 28 Apr '09

28 Apr '09

1 0

Best practices for running vdr-xine
by lucian orasanu 28 Apr '09

28 Apr '09

Hy, I use inittab like this and i have no problems # VDR vdr:35:respawn:/usr/local/bin/runvdr X:35:respawn:/usr/bin/startx

1 0

Re: [vdr] Record with 1.7.4 or 1.7.5 and iptv
by Senufo 28 Apr '09

28 Apr '09

Hi, I found the error. With IPTV you must define the type of stream in channels.conf In my channels.conf I wrote TF1;IPTV:1:IPTV|S0P0|UDP|232.0.1.17|8200:P:0:1217=2:1317:0:0:1:0:0:0 where VPID = 1217 and stream type = 2. If i change stream type with 27 (0x1B in Hexa). Record works fine. Thanks Klaus for your help Senufo On 26.04.2009 18:11, Senufo wrote: >/ Hi, />/ />/ I have add />/ />/ type = 0x1B; />/ />/ before the />/ />/ switch (type) { />/ />/ and now record work fine !! / Well, then all we need is a way to find out the correct video stream type. Apparently the PMT says it is 2, while in fact it is 0x1B. Does anybody know why the PMT is "lying", or how to detect that it actually isn't 2, but 0x1B? Klaus >>/ This looks like the "Access Unit Delimiter" code. />>/ />>/ Please try to force 'type' to 0x1B, for instance by putting />>/ />>/ type = 0x1B; />>/ />>/ right before the />>/ />>/ switch (type) { />>/ />>/ line. Does it work then? />>/ />>/ Klaus /

2 1

vdr and vdpau
by martinez＠embl.de 27 Apr '09

27 Apr '09

I have installed an nvidia driver with vpdau support, patched xine-lib1.2 with the vpdau patch, and recompiled xine-ui I have improvement with HD channels cpu utilization wise but still choppy image. Do I need to patch vdr itself or change some config options to optimize the speed? nvidia 8200 on-board

4 3

BBC HD and vdpau
by Rob Davis 27 Apr '09

27 Apr '09

I'm in a half way stage with VDR and h264. I didn't want the multipro drivers, but wanted to get a few HD channels working with vdpau. I have VDR working with BBC HD almost, and Sky HD +24 and a few others, however, BBC doesn't seem to display properly, as well as having problems with the audio selection. It looks like it has macrovision protection or something like that.. (Using vdr-sxfe and xine-libs with h264 support). As I said, other channels seem to work. I would try ITV HD but there's never anything on... Any tips? (In xxmc it sort of works, but jumps as it doesn't seem to have the guts to play the source.) VDR 1.6.0 with h264 patch. BBC HD works with streamdev :3000/TS/channel info.. on vlc.

6 12

ANNOUNCE vdr-ttxtsubs 0.1.0 for VDR 1.7.6
by Tobi 26 Apr '09

26 Apr '09

This is the first version with support for the VDR 1.7.x development branch. VDR versions older than VDR 1.7.6 are not supported anymore! Major credits go to Rolf Ahrenberg! Thanks a lot! The changes: * Updated VDR patch and plugin to VDR 1.7.6 with support for the TS recording format and added separate delay setting for TS recordings. * Silence compiler warning about unchecked read return value. * After replaying, reset the last channel variable and trigger a channel switch to reinitialize the live ttxtsubs display. * Removed unused local copy of vdrttxtsubshooks.c|h The major goal for the future developement of the Ttxtsubs plug-ins is to integrating ttxtsubs into the VDR core. Rolf Ahrenberg already provided solutions for some of the problems regarded to this goal: http://projects.vdr-developer.org/issues/show/117 http://projects.vdr-developer.org/issues/show/118 As always: Any help is welcome! Development site: http://projects.vdr-developer.org/projects/show/plg-ttxtsubs Downloads: http://projects.vdr-developer.org/projects/list_files/plg-ttxtsubs Git-Web: http://projects.vdr-developer.org/git/?p=vdr-plugin-ttxtsubs.git Anonymous Git-access : git://projects.vdr-developer.org/vdr-plugin-ttxtsubs.git For the required VDR-patches, I've also set up a Git-Repository, based on the one maintained by Dieter Hametner: http://projects.vdr-developer.org/git/?p=vdr-patches.git;a=summary git://projects.vdr-developer.org/vdr-patches.git This is intended to be a community maintained project! Don't expect me to fix your problems, I'm merely maintaining the project! Please report any bugs, ideas or feature requests to the project site (no registration required for this!). If you want to contribute patches, new features or whatever, post an issue or patch to the projects issue tracker or request to join the project. I would happily add everyone as a project member, who would like to contribute to the project! If you want to contribute but don't know what to do - start with some code refactoring! Currently some help from translators would be welcome for the Swedish translation. Tobias

1 0

Re: [vdr] Record with 1.7.4 or 1.7.5 and iptv
by Senufo 26 Apr '09

26 Apr '09

Hi, I have add type = 0x1B; before the switch (type) { and now record work fine !! Senufo >This looks like the "Access Unit Delimiter" code. > >Please try to force 'type' to 0x1B, for instance by putting > > type = 0x1B; > >right before the > > switch (type) { > >line. Does it work then? > >Klaus

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr