vdr

vdr@linuxtv.org

6731 discussions

Re: [vdr] about the hvr-4000 tuning problems
by Niels Wagenaar 16 Jan '09

16 Jan '09

Op Do, 15 januari, 2009 23:30, schreef Mika Laitio: > Hi > > -- SNIP -- > > I have following in my channel conf for dvb-t and dvb-s channels: > YLE > TV1;YLE:546000:B8C23G8M64T8Y0:T:27500:512=2:650=fin:2321:0:17:8438:4097:0 > arte;ARD:10743:hC56M5O0S0:S19.2E:22000:401=2:402=deu,403=fra:404:0:28724:1:1051:0 > Concerning Arte, I've got that same setting in my channels.conf. And I'm able to see that channel instantly. > Klaus, do you have any idea from which functions I should try to track > more for finding the problem? > I use a Hauppauge NOVA-HD-S2 and I've updated to the latest S2API drivers on the s2-liplianin repository. It uses the same kernel-driver as the HVR-4000. And I don't have any tuning problems at all on Hotbird 13.0, Astra 19.2, Astra 23.5 and Astra 28.2. This is with VDR 1.7.0 and my own S2API patch as well as with VDR 1.7.3. By any chance, did you try disabling diseqc? Because I had tuning problems when I used standard diseqc values with no retries with my diseqc 1.0 switch. I had to use the following safe diseqc commands for my diseqc 1.0 configuration: # # port 1 S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W100 [E0 10 38 F0] W100 [E0 11 00] W100 A W15 t S19.2E 99999 V 10600 t v W15 [E0 10 38 F1] W100 [E0 10 38 F1] W100 [E0 11 00] W100 A W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W100 [E0 10 38 F2] W100 [E0 11 00] W100 A W15 t S19.2E 99999 H 10600 t V W15 [E0 10 38 F3] W100 [E0 10 38 F3] W100 [E0 11 00] W100 A W15 T # port 2 S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W100 [E0 10 38 F4] W100 [E0 11 00] W100 B W15 t S13.0E 99999 V 10600 t v W15 [E0 10 38 F5] W100 [E0 10 38 F5] W100 [E0 11 00] W100 B W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W100 [E0 10 38 F6] W100 [E0 11 00] W100 B W15 t S13.0E 99999 H 10600 t V W15 [E0 10 38 F7] W100 [E0 10 38 F7] W100 [E0 11 00] W100 B W15 T # port 3 S23.5E 11700 V 9750 t v W15 [E0 10 38 F8] W100 [E0 10 38 F8] W100 [E0 11 00] W100 A W15 t S23.5E 99999 V 10600 t v W15 [E0 10 38 F9] W100 [E0 10 38 F9] W100 [E0 11 00] W100 A W15 T S23.5E 11700 H 9750 t V W15 [E0 10 38 FA] W100 [E0 10 38 FA] W100 [E0 11 00] W100 A W15 t S23.5E 99999 H 10600 t V W15 [E0 10 38 FB] W100 [E0 10 38 FB] W100 [E0 11 00] W100 A W15 T # port 4 S28.2E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.2E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.2E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.2E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T S28.5E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.5E 99999 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.5E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.5E 99999 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T > Mika > Regards, Niels Wagenaar

2 1

about the hvr-4000 tuning problems
by Mika Laitio 15 Jan '09

15 Jan '09

Hi I have tried to add some more printouts to dvbdevice.c for trying to understand why the vdr-1.7.x fails to tune to dvb-s or dvb-s2 channels. hvr-1300 is in /dev/dvb/adapter0 and hvr-4000 is in /dev/dvb/adapter1 I added printouts to SetFrontEnd() and Action() methods. In SetFrontEnd() method it seems that the code is at least always going to correct if/else block. (No, diseq, dvb-t, dvb-s or dvb-s2 depending on what channel I try to tune) If I watch dvb-t channel (which works), I can see a following logs: Action(): cardIndex: 0, tunerStatus: 1, NewStatus: 0 SetFrontEnd(): DVB-T, fd_frontend: 4, cardIndex: 0 Action(): cardIndex: 0, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 0, tunerStatus: 2, NewStatus: 1 ... Action(): cardIndex: 0, tunerStatus: 2, NewStatus: 31 frontend 0 regained lock on channel 1, tp 546 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 3, NewStatus: 31 frontend 0 regained lock on channel 1, tp 546 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 3, NewStatus: 31 frontend 0 regained lock on channel 1, tp 546 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 3, NewStatus: 31 ... If I instead try to tune to new dvb-s channel that I have not previously pre-tuned with szap or szap-s2 (for example arte), vdr will fail to show the channel and I can see a following: Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 31 Action(): cardIndex: 1, tunerStatus: 1, NewStatus: 31 Setup.DiSeqC == false SetFrontEnd(): DVB-S, fd_frontend: 6, cardIndex: 1 (frequency * 1000UL): 993000 channel.Modulation(): 9 channek.Srate() * 1000UL): 22000000 channel.CoderateH(): 5 channel.Inversion(): 2 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 3 frontend 1 lost lock on channel 5, tp 110743 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 3 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 1 ... If I have pre-tuned for example to same arte with szap-s2, then vdr is able to show that channel, and I get a following output: Action(): cardIndex: 1, tunerStatus: 0, NewStatus: 1 Action(): cardIndex: 1, tunerStatus: 1, NewStatus: 3 Setup.DiSeqC == false Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 SetFrontEnd(): DVB-S, fd_frontend: 6, cardIndex: 1 (frequency * 1000UL): 993000 channel.Modulation(): 9 channek.Srate() * 1000UL): 22000000 channel.CoderateH(): 5 channel.Inversion(): 2 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 2, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 frontend 1 regained lock on channel 5, tp 110743 Action(): cardIndex: 0, tunerStatus: 0, NewStatus: 0 Action(): cardIndex: 1, tunerStatus: 3, NewStatus: 31 ... I have following in my channel conf for dvb-t and dvb-s channels: YLE TV1;YLE:546000:B8C23G8M64T8Y0:T:27500:512=2:650=fin:2321:0:17:8438:4097:0 arte;ARD:10743:hC56M5O0S0:S19.2E:22000:401=2:402=deu,403=fra:404:0:28724:1:1051:0 Klaus, do you have any idea from which functions I should try to track more for finding the problem? Mika

1 0

[ANNOUNCE] vdr-plugin-muggle 0.2.3
by Wolfgang Rohdewald 15 Jan '09

15 Jan '09

vdr-plugin-muggle 0.2.3 is available at http://projects.vdr-developer.org/projects/list_files/plg-muggle Changes: http://projects.vdr-developer.org/projects/plg-muggle/news -- mit freundlichen Grüssen with my best greetings Wolfgang Rohdewald dipl. Informatik Ing. ETH Rohdewald Systemberatung Karauschenstieg 4 D 21640 Horneburg Tel.: 04163 826 819 Fax: 04163 826 828 Internet: http://www.rohdewald.de

1 0

Minimal VDR install
by Chris Silva 15 Jan '09

15 Jan '09

Hi, folks. My current vdr is instaled over "normal" ubuntu desktop since forever. Now I want to try something similar starting with ubuntu server and reducing installed packages to the minimum. I found a similar ideia at this link: http://kuparinen.org/martti/comp/vdr/vdr.html Now for the questions: - Anyone with similar approach? - What is the minimum xorg needed? - Recommended settings? The ideia is to have a lightweight system installed on a usb pen (almost all files are read only, so no problem) and add one or more HDD drives to perform the recording. Those drivers will only work when a recording is scheduled. Thus reducing noise to the minimum. Currently I have almost no dB coming from my vdr box, except for the disks. I need to take in account other applications xorg needs. Like xine, mplyer, whatever. I really want to end up with a minimal/no noise fully working system. Thanks.

5 6

Re: [vdr] why the VDR-PC can't auto run runvdr?
by LinHai 15 Jan '09

15 Jan '09

thank you! Udo Richter After I patched the runvdr-0.4.0-xserver-commandline.diff, the runvdr can auto run sucessfully. But auto runvdr can't change the OSD Language. IF I logined the system, and press /etc/init.d/runvdr start, at this time the vdr can change the OSD Language. why? _________________________________________________________________ MSN新版在线社交网络，与您的MSN好友更全面互动！ http://im.live.cn/msn9/

1 0

Can't compile VDR
by Chris Silva 15 Jan '09

15 Jan '09

Hi. I'm having problems compiling VDR 1.7.0 and 1.7.3. This is the error: /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:64:28: error: linux/compiler.h: No such file or directory In file included from /usr/local/src/s2-liplianin/linux/include/linux/videodev.h:16, from dvbdevice.c:13: /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:560: error: field '__user' has incomplete type /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:560: error: expected ';' before '*' token /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:567: error: expected ';' before '*' token /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:569: error: variable or field '__user' declared void /usr/local/src/s2-liplianin/linux/include/linux/videodev2.h:569: error: expected ';' before '*' token In file included from dvbdevice.c:13: /usr/local/src/s2-liplianin/linux/include/linux/videodev.h:148: error: expected ';' before '*' token In file included from dvbdevice.c:17: /usr/local/src/s2-liplianin/linux/include/linux/dvb/video.h:162: error: expected ';' before '*' token /usr/local/src/s2-liplianin/linux/include/linux/dvb/video.h:195: error: expected ';' before '*' token dvbdevice.c: In member function 'virtual void cDvbDevice::StillPicture(const uchar*, int)': dvbdevice.c:1299: error: too many initializers for 'video_still_picture' dvbdevice.c:1299: error: invalid conversion from 'char*' to 'int32_t' dvbdevice.c:1305: error: too many initializers for 'video_still_picture' dvbdevice.c:1305: error: invalid conversion from 'char*' to 'int32_t' make: *** [dvbdevice.o] Error 1 Same error happens with s2-liplianin *and* v4l-dvb, with latest revisions. Tried googling for it, but no solution... Any thoughts? Thanks

3 4

why the VDR-PC can't auto run runvdr?
by LinHai 14 Jan '09

14 Jan '09

My VDR system run on xorg without KDE. cp init.d.runvdr.Debian /etc/init.d/runvdr chmod a+x /etc/init.d/runvdr cp runvdr /usr/bin/runvdr chmod a+x /usr/bin/runvdr cp runvdr.conf.example /etc/runvdr.conf ln -s /etc/init.d/runvdr /etc/rc2.d/S99runvdr runvdr.conf:--------------------------------------------------# Fire up own X server as output deviceXSERVER="/usr/bin/X -nolisten tcp -config /etc/X11/xorg-runvdr.conf :0"-------------------------------------------------- when I start the VDR-PC,The Screen displays: /usr/bin/runvdr:line 576: 4515 Segmentation fault waiting for X server to shut downPID=4515RET=139VDR died within 10 seconds, this happened 6 time(s).Terminating because VDR died 6 times in a row quickly at wed Jan 14 06:51:28 CST 2009Sending 1 processes the TERM signal.terminated. /usr/bin/runvdr:line 576: 4515 Segmentation fault-----------------------------------------------------# Act as a proxy for calling VDR, from within X sessionif [ -n "$XSERVERPROXY" ] ; then eval "$VDRCMD &" PID=$! echo "PID $PID" > "$XSERVERPROXY" wait $PID #line 576: 4515 Segmentation fault echo "RET $?" >> "$XSERVERPROXY" exit 0fi ----------------------------------------------------- But after I logined the VDR-PC.root@vdr:/etc/inti.d/runvdr startthe VDR-PC run X at first, next run vdr is OK. why the VDR-PC can't auto run runvdr，but after I logined the VDR-PC,press the command:/etc/inti.d/runvdr start，the vdr running is OK? _________________________________________________________________ 微软地图率先推出跨城市多点驾车路线查询！ http://ditu.live.com/?form=MRAHAB&rtp=pos.30.454167_116.308611_%E5%A4%AA%E6…

3 2

xineliboutput - front ends not detected?
by Simon Baxter 14 Jan '09

14 Jan '09

Hi I'm trying to install xineliboutput on a EPIA SP13000, but am getting the following error: [root@freddy xineliboutput-1.0.3]# make install Makefile:68: ******************************************************** Makefile:69: xine-lib not detected ! frontends will not be compiled. Makefile:70: ******************************************************** Makefile:170: libextractor not found. make: Nothing to be done for `install'. [root@freddy xineliboutput-1.0.3]# rpm -qa | grep xine xine-0.99.5-5.fc10.i386 xine-lib-1.1.15-3.fc10.i386 xine-lib-pulseaudio-1.1.15-3.fc10.i386 totem-xine-2.24.3-1.fc10.i386 What am I missing? Thanks Simon

3 3

[ANNOUNCE] VDR developer version 1.7.3
by Johann Friedrichs 14 Jan '09

14 Jan '09

It is much easier than in my previous message to get plugins running, that use cReadDir: add DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE \ -D_LARGEFILE64_SOURCE to Make.config Regards, Johann

1 0

Re: [vdr] [ANNOUNCE] VDR developer version 1.7.3
by Johann Friedrichs 13 Jan '09

13 Jan '09

Hi, with vdr 1.7.3 I had no directory display in the pictures-plugin and crashes in dvdswitch, while it initially scanned the defined base directory for DVD-Images. I found, that with the LARGEFILE options I had to change cReadDir accordingly to use dirent64 and readdir64_r (tools.h, tools.c) Those Plugins, using cReadDir like pictures, epgsearch, dvdswitch then also had to change dirent to dirent64. With these changes the plugins are working again (Base system is Debian etch). Regards Johann

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr