vdr

vdr@linuxtv.org

6731 discussions

dvbtextsubs 0.2
by listnisse 10 Jul '07

10 Jul '07

Hi all, I have searched the internet (including archive.org) for dvbtextsubs-0.2.tar.gz but haven't found it. I would really appreciate if some friendly soul on this list would like to send me the file or point me to a location. Kind regards Anders

5 6

HELP! vdr-1.4.1 and softdevice-0.4.0 aren't working any more
by Harald Milz 09 Jul '07

09 Jul '07

Hi, after having reinstalled my VDR with OpenSUSE 10.1 a couple of weeks ago (after which VDR was working happily for some time) some very strange things happened. At first, after a reboot, sound was gone, without any change in the configuration, only after rebooting. My setup is still as described in http://www.vdr-wiki.de/wiki/index.php/Softdevice-plugin#Matrox_G550_mit_DVI… (in German, though). In particular, softdevice is invoked as softdevice -ao alsa:pcm=plug:spdif#ac3=plug:spdif# -vo dfb: No sound from VDR. Video was displayed fine. I could play testsounds with aplay just fine. I started to troubleshoot the system to no avail. After one more reboot with no apparent change in the configuration (I checked all settings in setup.conf), VDR started to crash reliably each time vdr starts. The crash happens so quick that no logs are written, except over the network. The relevant last lines are (I changed "alsa:pcm=plug:spdif" to "alsa:pcm=default" bit no change): (HW setup: 3 dumb cards, budget, budget-ci and b2c2). Jul 7 17:20:02 linvdr linvdr vdr: [3322] VDR version 1.4.1 started Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading plugin: ./PLUGINS/lib/libvdr-softdevice.so.1.4.1 Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/setup.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] ERROR: unknown config parameter: softdevice.AlsaAC3Device = plug:spdif Jul 7 17:20:02 linvdr linvdr vdr: [3322] ERROR: unknown config parameter: softdevice.AlsaDevice = default Jul 7 17:20:02 linvdr linvdr vdr: [3322] ERROR: unknown config parameter: softdevice.Postprocess Method = 0 Jul 7 17:20:02 linvdr linvdr vdr: [3322] ERROR: unknown config parameter: softdevice.Postprocess Quality = 0 Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/sources.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/diseqc.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/channels.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/timers.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/commands.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/reccmds.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/svdrphosts.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/remote.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] loading /etc/vdr/keymacros.conf Jul 7 17:20:02 linvdr linvdr vdr: [3322] reading EPG data from /etc/vdr/epg.data Jul 7 17:20:02 linvdr linvdr vdr: [3323] video directory scanner thread started (pid=3322, tid=3323) Jul 7 17:20:02 linvdr linvdr vdr: [3324] video directory scanner thread started (pid=3322, tid=3324) Jul 7 17:20:03 linvdr linvdr vdr: [3322] probing /dev/dvb/adapter0/frontend0 Jul 7 17:20:03 linvdr linvdr vdr: [3322] probing /dev/dvb/adapter1/frontend0 Jul 7 17:20:03 linvdr linvdr vdr: [3327] tuner on device 1 thread started (pid=3322, tid=3327) Jul 7 17:20:03 linvdr linvdr vdr: [3328] section handler thread started (pid=3322, tid=3328) Jul 7 17:20:03 linvdr linvdr vdr: [3322] probing /dev/dvb/adapter2/frontend0 Jul 7 17:20:03 linvdr linvdr vdr: [3330] tuner on device 2 thread started (pid=3322, tid=3330) Jul 7 17:20:03 linvdr linvdr vdr: [3331] section handler thread started (pid=3322, tid=3331) Jul 7 17:20:03 linvdr linvdr vdr: [3322] found 3 video devices Jul 7 17:20:03 linvdr linvdr vdr: [3322] initializing plugin: softdevice (0.4.0): A software emulated MPEG2 device Jul 7 17:20:03 linvdr linvdr vdr: [3333] tuner on device 3 thread started (pid=3322, tid=3333) Jul 7 17:20:03 linvdr linvdr vdr: [3334] section handler thread started (pid=3322, tid=3334) Jul 7 17:20:03 linvdr linvdr vdr: [3322] [dfb] init Jul 7 17:20:04 linvdr linvdr lircd-0.7.2[2067]: accepted new client on /dev/lircd Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Supported video Modes are: Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Enumerating display Layers Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Configuring CooperativeLevel for OSD Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] (osdLayer): flags, options, pixelformat: 0000000f, 00000000 00418c04 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] (osdLayer): width, height: 1280 720 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] osdLayer without !! alpha channel Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] surface capabilities for (scrSurface): videoonly, double-buffered, flippi ng, PixelFormat = 0x00418c04 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] width = 1280, height = 720 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] got fmt = 0x00418c04 bpp = 32 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Using this layer for OSD: (FBDev Primary Layer - [1280x720]) Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] surface capabilities for (osdSurface): videoonly, double-buffered, flippi ng, PixelFormat = 0x00418c04 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Configuring CooperativeLevel for Overlay Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] surface capabilities for (videoSurface): videoonly, PixelFormat = 0x00200 806 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Using this layer for OSD: FBDev Primary Layer Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Using this layer for Video out: Matrox Backend Scaler Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] Display frame time is 16647 microseconds Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] (re)configuring Videolayer to 720 x 576 (720x576) Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb]: Testconfiguration failed flags: 00000040 (disabling failed flags) Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] SetParams: action=IDirectFBDisplayLayer::SetConfiguration(DFBDisplayLayer Config&), result=Out of video memory! Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] surface capabilities for (videoSurface): videoonly, double-buffered, flip ping, PixelFormat = 0x00200806 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [dfb] (re)configured 0x08100609 Jul 7 17:20:04 linvdr linvdr vdr: [3322] [softdevice] videoOut OK ! Jul 7 17:20:04 linvdr linvdr vdr: [3322] [softdevice-audio] Opening alsa device default Jul 7 17:20:04 linvdr linvdr vdr: [3322] [softdevice-audio] Using alsa AC3 device plug:spdif Jul 7 17:20:04 linvdr linvdr lircd-0.7.2[2067]: removed client Jul 7 17:20:04 linvdr linvdr vdr: [3322] [softdevice-audio] Device opened! Ready to play Jul 7 17:20:04 linvdr linvdr vdr: [3322] setting primary device to 4 Jul 7 17:20:04 linvdr linvdr vdr: [3322] SVDRP listening on port 2001 Jul 7 17:20:04 linvdr linvdr vdr: [3322] setting current skin to "sttng" Jul 7 17:20:04 linvdr linvdr vdr: [3322] loading /etc/vdr/themes/sttng-default.theme Jul 7 17:20:04 linvdr linvdr vdr: [3322] starting plugin: softdevice Jul 7 17:20:04 linvdr linvdr vdr: [3322] remote control softdevice-dfb - keys known Jul 7 17:20:04 linvdr linvdr vdr: [3322] remote control KBD - keys known Jul 7 17:20:04 linvdr linvdr vdr: [3322] switching to channel 1 (What is the "result=Out of video memory!" telling me?) And then it crashed, machine completely freezed. Kernel and DVB drivers were unchanged from the last time it worked, as well as DirectFB, DFB++, ffmpeg, and Fusionsound. I have no ideas where to look further. What may be happening here? TIA!!! -- panic: kernel trap (ignored)

3 2

Re: [vdr] Beta version of vdr with dvb-s2 support
by Martin Werner 08 Jul '07

08 Jul '07

So, at this time we are waiting for the backend. Hopefully interleaced H264 comes soon. So long, Martin Sent by Good Messaging (www.good.com) -----Original Message----- From: Stefan Lucke [mailto:stefan@lucke.in-berlin.de] Sent: Sunday, July 08, 2007 02:47 PM W. Europe Standard Time To: VDR Mailing List Subject: Re: [vdr] Beta version of vdr with dvb-s2 support On Sunday 08 July 2007 14:14, Reinhard Nissl wrote: > Hi, > > Martin Werner wrote: > > > I am stil uncertain of what DVB-S2 Hardware I should buy. But if you can give me a hint, I go - buy - and watch Pro7 tomorrow in HDTV. I don't want to make an advertisement here, but it's easy for me to grab a SAT PCI-KARTE TECHNISAT SKYSTAR HD (Bestnr.: 941604) http://www.conrad.de/scripts/wgate/zcop_b2c/!?perform_special_action=Produk… > > > > Does it work? I use anways XINE as frontend .. so, I only would need to install the new card and apply your patch. > > Well, the next vdr-xine release will support it. It works here already, > but the biggest drawback is that FFmpeg "lacks" interlaced H.264 > decoding (PAFF, MBAFF), i. e. FFmpeg crashes after a few frames. Like the following mplayer messages: Movie-Aspect is 1.76:1 - prescaling to correct movie aspect. VO: [xv] 1920x1088 => 1920x1088 Planar YV12 [ASPECT] Warning: No suitable new res found! [ASPECT] Warning: No suitable new res found! [ASPECT] Warning: No suitable new res found! New_Face failed. Maybe the font path is wrong. Please supply the text font file (~/.mplayer/subfont.ttf). subtitle font: load_sub_face failed. New_Face failed. Maybe the font path is wrong. Please supply the text font file (~/.mplayer/subfont.ttf). subtitle font: load_sub_face failed. [h264 @ 0x87fdf00]PAFF interlacing is not implemented??% ??,?% 0 0 [h264 @ 0x87fdf00]PAFF interlacing is not implemented [h264 @ 0x87fdf00]PAFF interlacing is not implemented -- Stefan Lucke _______________________________________________ vdr mailing list vdr(a)linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

2 1

Beta version of vdr with dvb-s2 support
by jlac vdr 08 Jul '07

08 Jul '07

Hi, This is a beta version of vdr which support dvb-s2. So this version is able to watch TVHD through a streaming plugin (streamdev plugin is include in archive). http://www.freewebs.com/jlacvdr/vdr-s2hd/vdr-1.4.6-s2hd-070630.tar.bz2 The DVB-S2 channels must have 'M8' in modulation field of channels.conf, for example: ASTRAPROMO_HD:12721:hC23M8:S19.2E:22000:767:768:0:0:10202:1:1119:0 tested with: - linux 2.6.19 - TT3200 card (manu drivers and laasa patch) JLac

6 6

noad plugin, where?
by Torgeir Veimo 08 Jul '07

08 Jul '07

Am looking for the noad plugin, but google doesn't seem to know where it is..? -- Torgeir Veimo torgeir(a)pobox.com

5 6

subtitles-0.5.0 and gentoo
by JJussi 07 Jul '07

07 Jul '07

Hi! I have problem with YLE and subtitles. Subtitles work on "live", but can't see them when watching recording.. OK, If I have understand right the information what I found from net, that should be fixed at subtitles-0.5.0.. So.. I use gentoo and it's packeting system. How I can include this 0.5.0 version to my system, gentoo have only 0.4.0 version on it's repository.. Who is upkeeping vdr stuff at gentoo side... (OK, that "who" should insert vdr-1.4.7 too) Is only solution to "override" whole gentoo packeting system and compile everything itself? -- JJussi

4 4

No signal - Dish seems fine - femon output follow
by Peer Oliver Schmidt 06 Jul '07

06 Jul '07

Hello, after my vacation I no longer have any reception. 3x DVB-S Budget cards vdr (1.4.7/1.4.5) - The Video Disk Recorder xineliboutput (1.0.0rc2) - X11/xine-lib output plugin vompserver (0.2.6) - VDR on MVP plugin by Chris Tallon femon (1.1.1) - DVB Signal Information Monitor (OSD) streamdev-server (0.3.3-pre3-geni) - VDR Streaming Server The setup has been running for quite some time, after receiving a new dish and some new cables. Since then I have had a couple of month of very good reception. Now, after two weeks of vacation it is no longer functioning. Visiting the logs it seems the errors started around 20:03h, June 25th. /var/log/messages: Jun 25 20:03:22 vdr vdr: [11512] frontend 1 lost lock on channel 7, tp 112544 After that; I see very sporadic Jun 26 16:06:14 vdr vdr: [11512] frontend 1 regained lock on channel 7, tp 112544 femon reports vdr:~# femon -a 0 using '/dev/dvb/adapter0/frontend0' FE: Samsung S5H1420 DVB-S (SAT) status 00 | signal b6b6 | snr bfce | ber 00000000 | unc 00000000 | status 00 | signal b5b5 | snr bfce | ber 00000000 | unc 00000000 | vdr:~# femon -a 1 using '/dev/dvb/adapter1/frontend0' FE: Samsung S5H1420 DVB-S (SAT) status 00 | signal b0b0 | snr bfca | ber 00000000 | unc 00000000 | status 00 | signal b0b0 | snr bfca | ber 00000000 | unc 00000000 | vdr:~# femon -a 2 using '/dev/dvb/adapter2/frontend0' FE: Samsung S5H1420 DVB-S (SAT) status 00 | signal b0b0 | snr bfc4 | ber 00000000 | unc 00000000 | status 00 | signal b0b0 | snr bfc4 | ber 00000000 | unc 00000000 | 2 of the three cards are connected to a multiswitch, the third one is directly connected to an LNB. szap ARD reports vdr:~# szap ARD reading channels from file '/root/.szap/channels.conf' zapping to 1 'ARD': sat 0, frequency = 11837 MHz H, symbolrate 27500000, vpid = 0x0065, apid = 0x0066 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal b5b5 | snr fffe | ber 00000000 | unc 00000000 | status 00 | signal b6b6 | snr fffe | ber 00000000 | unc 00000000 | status 00 | signal b5b5 | snr fffe | ber 00000000 | unc 00000000 | showing no lock. Any and help in finding the problem is greatly appreciated. -- Best regards Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA

4 9

convert the channels.conf from scantv to the vdr format
by Sebastian Dellit 06 Jul '07

06 Jul '07

Hoppa VDR readers, I'm new at this list. My name is Sebastian, 25 years old and I coms from Germany. My first question: Is there a possibility to convert the result of scantv in to a vdr supported channels.conf format? I try the example from vdr-wiki but my vdr means, "error by reading ...". :-( I use vdr 1.4.7 on a Debian Lenny/Sid System with e-toby. The channels.conf must be for the analogtv plugin. What can I do? Thanks and -- Best regards Sebastian ICQ: 264706583 / MSM: sebo(a)blinzeln.de / Skype: sebo_de E-Mail: sebo(a)blinzeln.de / Web: www.blindzeln.de

1 0

femon and xineliboutput
by Simon Natterer 04 Jul '07

04 Jul '07

Hi, when I try to start femon with xineliboutput nothing apears. It seems to to start but nothing is shown on screen (using vdr-sxfe or xine directly). Starting femon on console works when vdr is not running. All other plugins seem to work. Experimenting with OSD settings in xineliboutput options didn't solve the problem. femon 1.1.3 xineliboutput 1.0.0-rc2 vdr 1.4.7 Any ideas? Simon

2 2

[PATCH] prefermenu-0.6.6 for VDR >= 1.5.3
by Thomas Günther 04 Jul '07

04 Jul '07

Hello! Here is a patch for the prefermenu-0.6.6 plugin and VDR >= 1.5.3: http://toms-cafe.de/vdr/download/prefermenu-0.6.6-1.5.3.diff It's the same problem as in the sysinfo plugin: cFont::GetFont() is called to early. Tom

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr