vdr

vdr@linuxtv.org

6731 discussions

Possible bug with recording...
by VDR User 17 Feb '07

17 Feb '07

I was watching something via the mplayer plugin. A recording timer was triggered which aborted the mplayer playback. Is this behavior intentional? If so, can the abort be disabled while still allowing the timer to function properly? I know there's always the option of not watching anything else during a timer/recording event but I would suggest that defeats one of the main purposes of a recording in the first place, ...a means to allow you to watch a show at your own convenience. In this case it was not convenient to abort what I had already watching and was right in the middle of. Thanks for your input fellas.

2 2

Re: [vdr] mp3 plugin error
by s.huelswitt＠gmx.de 17 Feb '07

17 Feb '07

On 26 Jan 2007 Marco Skambraks <marco(a)ammec.de> wrote: > On Thu, 25 Jan 2007, Halim Sahin wrote: >> >> The plugin remembers the last played directory but does not check if the >> dir is >> available before loading it. >> >> A fix can be possible in LoadDir function???? > > I made a dirty hack and it looks OK but not very fast and not nice > menu.c - LoadDir line 141: You're right. Thanks for reporting. I adapted the patch as attached. Regards. -- Stefan Huelswitt s.huelswitt(a)gmx.de | http://www.muempf.de/

1 0

how to setup VDR with my hardware ?
by Travel Factory S.r.l. 16 Feb '07

16 Feb '07

In the last 3 years I have cumulated some different hardware gizmo and it is my goal to put them in production now.... but I'd like to hear from more expert people if feasible or not. My VDR server is a 200mhz IBM netstation, with a Nexus DVB-S and a dvb-t card. netstation has been modified to host a notebook harddisk. it has a 100mbit lan. It is located in my "computer room" and connected to the kitchen tv via a CVBS (for viewing) and VGA (for configuring) My other equipment is: - Hauppauge MVP (unused) - dlink 320 (dvd/divs player with lan connection using uPNP protocol) in living room - a couple of other PC Now I'd like to: a) start using the MVP to connect to television in bedroom: I think that VOMPserver should be used b) start using the dlink 320.... just for replay if realtime tv not possible.... I don't think there is an hook to vdr for uPNP servers... I may configure the server to "export" the VDR directory structure... c) stream the live tv or replays to the notebook or the PC I usually use... what plugins/patches/setup/programs should I use on the VDR server and on the Windows or Linux (dual boot) PC ? A link to documentation is of course ok. Thank you, Francesco PS: I know that a 200mhz server is nowadays wery outdated.... but it's chipset is a genuine intel and it is able to succesfully record up to 3 streams concurrently (but VDR responsiveness is really bad...). Other PC I may use have poor quality chipsets that can't handle that load, have AMD processors that need HUGE and noisy heatsink.....

1 0

VDR user input slowness
by Teemu Suikki 16 Feb '07

16 Feb '07

Hi, Why is the user input so slow? When I press a key in remote, there seems to be a random delay of 0-0.5sec or so.. Sometimes it's fast, sometimes not. It's fine in channel switching but really annoying when you a trying to input filenames or something. I have been using VDR for two years and the problem has always been there. However I just made another VDR box, that doesn't have any DVB cards. It just streams data from the bigger box, with streamdev. Remote control is really fast and snappy here, no lag at all! So is it the DVB handling that slows vdr down? Perhaps some priority issue that could be adjusted? Both boxes use dxr3-plugin as output device, and pretty much identical software setup (copied over from box1 to box2).. VDR version is 1.4.5. -- Teemu Suikki http://www.z-power.fi

3 6

Ideal conditions for VDR
by Stuart Morris 16 Feb '07

16 Feb '07

What are the ideal conditions under which to run VDR? For example: Nice level? Nice level relative to other apps, daemons and stuff running at the same time? Pre-emptive kernel? Kernel timer 250Hz? 1000Hz? Quantity of system memory? Processor speed? Frequency scaling? I am running VDR with Vompserver for the front end. --------------------------------- All New Yahoo! Mail Tired of unwanted email come-ons? Let our SpamGuard protect you.

1 0

UK Freeview Logical Channel Numbers
by Andrew Herron 15 Feb '07

15 Feb '07

Does anyone know if the Logical Channel Numbers that are used in the UK on Freeview DVB-T transmissions are currently handled by VDR in anyway? Cheers Andrew Herron

6 13

Is there a way to give inode entries a higher cache priority than data in the linux kernel?
by Carsten Koch 15 Feb '07

15 Feb '07

I have a distributed VDR system in my house with a lot of disks that are NFS mounted by VDR PCs in two rooms. In order to conserve energy, I have used hdparm to set a spin down delay after which the disks turn themselves off. When /video/.update is touched (one of the VDR PCs creates/deletes/ edits a recording, I move a recording into a folder, etc.) or when the vdr program is started, it reads all directories from all disks. Most of these directories are unchanged, so there really is no need to spin up the disk just to read a few inode entries. However, my observation is that they are always spun up. So my questions are: 1) Is there a bug in the linux kernel that makes it spin up the disk needlessly even if the data are still in the cache? 2) Is there a way to configure the kernel, so the inode entries are locked in the cache or at least get a much higher cache priority than ordinary data? Thanks and Cheers, Carsten.

5 6

streamdev hang after short burst noise.
by Ali H.M. Hoseini 15 Feb '07

15 Feb '07

Hi all, I've a vdr box that i use with streamdev plugin. I watch this streams over my windows computer with vlc. But now, there is some random noise that appears in my input signal, causes to streamdev to fail completely. the noise time is so short that vdr works and does not restart, but I should restart it to restart streamdev server. Any clue or solution for this problem. With the best wishes. J. Anderson.

1 0

pvrinput radio
by Simon Baxter 14 Feb '07

14 Feb '07

I've asked this before, last year, but never had a response. How do I configure radio channels in VDR. My channels.conf has: Classic Hits:90000:I999C0:C:0:0:300:305:A1:12003:1:1006:0 But I think I'm picking up the wrong device, as I hear no audio. I have a single PVR-150 with ivtv and the following devices: /dev/video0 /dev/video24 /dev/video32 When I do a 'ivtv-radio -f90000' I see: aplay -f dat < /dev/video24 #which works So....what should my Parameters be?? C0 - Input 0 C12 - Input 1 C23 - Input 2 C34 - Input 3 C45 - Input 4 C56 - Input 5 C67 - Input 6 C78 - Input 7 C89 - Input 8 C999 - Input 9 Thanks - in advance!

2 11

streamdev hang after short burst noise.
by Ali H.M. Hoseini 14 Feb '07

14 Feb '07

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr