vdr

vdr@linuxtv.org

2 participants
6731 discussions

Start a nNew thread

Re: [vdr] Querying CAM doesn't work
by Dominique Dumont 29 Aug '05

29 Aug '05

Hello Here are some explanation provided by a CAM developer. HTH

2 1

minor OSD bug: missing menu update
by Alfred Zastrow 29 Aug '05

29 Aug '05

Hello Klaus, please try: - "pause" the live picture - view the recording by pressing "play" - press "exit" to stop viewing (OSD shows the recording list) - delete the live recording -> 2 x "OK" -> the timer is stoping - press "exit" to go to the main menu, you will still see the option to stop the recording, but this is allready stopped regards Alfred

4 5

[PATCH] ignore k_Repeat in cInterface::Wait()
by Marko Mäkelä 29 Aug '05

29 Aug '05

While testing my suspend patch (see the previous message), I noticed somewhat annoying behaviour of cInterface::Wait(). If I press the "Suspend" key for a long time, so that it makes a normal keypress event as well as a k_Repeat event, the "Press any key to cancel shutdown" prompt will be cleared by the k_Repeat event. I presume that the same would happen with the "Power" key. If I understood the loop termination condition in cInterface::Wait() correctly, only k_Repeat of kOk would be filtered out. I think it would be better to ignore all k_Repeat keycodes. Please see the attached patch. Marko

2 2

UPDATE: vdr-1.3.31-dvbplayer5.patch
by Reinhard Nissl 28 Aug '05

28 Aug '05

Hi, from http://home.vr-web.de/~rnissl/vdr-patches-README.txt dvbplayer5 (highly recommended) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fixes VDR's recording replayer to send proper I-frames to a device. Without this patch it is very likely that incomplete I-frames are sent and therefore many I-frames will not be displayed by devices like vdr-xine or dxr3. This patch has a very positive effect on moving cutting marks and all fast trickspeed modes as well as slow motion rewind. NOTE: without this patch it is likely that xine disconnects from vdr-xine while moving cut marks. NOTE: the 1.2.6 version already contains the transfer patch. These are the links: http://home.vr-web.de/~rnissl/vdr-1.3.31-dvbplayer5.patch http://home.vr-web.de/~rnissl/vdr-1.2.6-dvbplayer5.patch This new release adds MPEG 1 support for the 1.2.6 version and fixes behaviour on radio recordings as well as recordings which were created by external sources and contain system level packets like "pack header", "system header" and "stream end". Special thanks to Fabian Wolter for supplying a suitable recording. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

2 2

VDR-1.3.31: moving cutting marks: cDvbPlayer::SkipFrames() is off by one for I frame only recordings (currently radio recordings)
by Reinhard Nissl 28 Aug '05

28 Aug '05

Hi, you may have experienced that moving cutting marks in radio recordings always changes the frame counter by 2. The attached patch fixes this issue. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

1 0

Re: [vdr] Re: [linux-dvb] Problems using two devices (ff & budget)
by I.Seeberg 28 Aug '05

28 Aug '05

Hello, I just realized that while recording (i.e. starting and stopping all the time) the process "kdvb-fe-0" has 65% CPU usage (PIII-600 - 128 MB RAM) and that there are "a lot" (no other messages viewable and pages ...) of i2c master_xfer failed messages in the dmesg output. I don't know wether this has to do with my problem or is just because of the start and stopping of the timer - here again the full log: Aug 28 17:27:43 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') added (active) Aug 28 17:27:43 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') set to event Son 28.08.2005 17:15-17:45 'Mein Garten' Aug 28 17:27:43 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') start Aug 28 17:27:43 cinema vdr[4347]: record /video/Mein_Garten/2005-08-28.17:11.50.99.rec Aug 28 17:27:49 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') stop Aug 28 17:27:49 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') start Aug 28 17:27:49 cinema vdr[4347]: record /video/Mein_Garten/2005-08-28.17:11.50.99.rec Aug 28 17:27:54 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') stop Aug 28 17:27:54 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') start Aug 28 17:27:54 cinema vdr[4347]: record /video/Mein_Garten/2005-08-28.17:11.50.99.rec Aug 28 17:28:00 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') stop Aug 28 17:28:00 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') start Aug 28 17:28:00 cinema vdr[4347]: record /video/Mein_Garten/2005-08-28.17:11.50.99.rec Aug 28 17:28:06 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') stop Aug 28 17:28:06 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') start Aug 28 17:28:06 cinema vdr[4347]: record /video/Mein_Garten/2005-08-28.17:11.50.99.rec Aug 28 17:28:13 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') stop Aug 28 17:28:13 cinema vdr[4347]: timer 6 (4 1711-1755 'Mein Garten') start Aug 28 17:28:13 cinema vdr[4347]: record /video/Mein_Garten/2005-08-28.17:11.50.99.rec (...) There is no emergency exit and just very slow reaction of vdr commands (press key - 10 seconds until action). I am using vdr-1.3.30 and kernel 2.6.12.5 with dvb-patches (for kernel 2.6.13) from linuxtv.org. Sorry for posting it partly again but I missed a lot the first time. -- Greetings, Ingo Seeberg

1 0

VDR-1.3.28-31: BUG with appending sequence end code while moving cutting marks of radio recordings
by Reinhard Nissl 28 Aug '05

28 Aug '05

Hi, I'm sorry for having introduced this bug. It is wrong to append a sequence end code (video stream related) to an audio stream, when moving cuttingv marks of radio recordings. The attached patch fixes this issue. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@gmx.de

1 0

[Announce] LNB-sharing patch for VDR 1.3.31
by Matthias Lötzke 28 Aug '05

28 Aug '05

Hello! A new release of the configurable LNB-sharing patch for VDR 1.3 is available at: http://xn--ltzke-jua.de/dvb/VDR_LNB_sharing_patch/configurableLNBshare-VDR_… Changes: - adapted to VDR 1.3.31 - slightly better documentation in the source code For general information about the LNB-sharing patch have a look at: http://xn--ltzke-jua.de/dvb/VDR_LNB_sharing_patch/Description.txt http://www.vdr-wiki.de/wiki/index.php/Lnbsharing-patch (german) Matthias.

1 0

Problem when no input signal
by Jarmo Järvenpää 28 Aug '05

28 Aug '05

Dear list, With Vdr 1.3.31 and newest dxr3 -plugin there seems to be a problem when dvb-t card receives no signal at all. The screen is blank, but any remote control key presses cause no immediate effects. For example, menu-button causes menu to appear after waiting about 10s. When signal is ok, menu appears as wanted. The problem affects any key presses user might do. BR, Jarmo

6 11

Re: [linux-dvb] Problems using two devices (ff & budget)
by Patrick Boettcher 28 Aug '05

28 Aug '05

Hi, On Sun, 28 Aug 2005, I.Seeberg wrote: > Yesterday I upgraded my vdr system into a two dvb-s devices system. > First it all seems to work. But in the evening I realized that recording > is not possible. > > In the logs I found: > Aug 28 17:53:42 cinema vdr[5733]: timer 6 (7 1656-1810 'Wissen Extrem: > Monster Maschinen') stop > Aug 28 17:53:42 cinema vdr[5733]: timer 6 (7 1656-1810 'Wissen Extrem: > Monster Maschinen') start > Aug 28 17:53:42 cinema vdr[5733]: record > /video/Wissen_Extrem:_Monster_Maschinen/2005-08-28.16:56.50.99.rec I don't see any error here. > dmesg shows the following using the b2c2-flexcop-pci module of kernel > [..] > b2c2-flexcop: initialization of 'SkyStar 2 DVB-S (old version)' at the 'PCI' bus controlled by a 'FlexCopII' complete > an a lot of > b2c2-flexcop: i2c master_xfer failed > messages! Ignore them, the driver is probing the possible demodulators it can have. In fact your log looks good. > I don't know what to do. > Is kernel 2.6.12.5 equipped with a recent dvb driver version? Yes, but the problem some cards have (suddenly no data transfer anymore) is not fixed in 2.6.12. It will be included in 2.6.13. Or you use the patches for 2.6.12 from http://www.linuxtv.org/downloads/patches/. Btw. if you can, don't use the skystar2-driver anymore. It is superseded by the flexcop-modules. This is just information about the driver situation. I'm unfortunately not able to help you with your real problem. Does VDR do an emergency exit or why do you assume that recording is not possible anymore? best regards, Patrick. -- Mail: patrick.boettcher(a)desy.de WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr