vdr

vdr@linuxtv.org

2 participants
6731 discussions

keymacros strange behaviour
by Helmut Auer 06 May '05

06 May '05

Hello, I have defined in Keymacros.conf: ... User2 Commands 1 BACK ... Executing this key opens the Menu window ( No matter if pressing the key or sending HITK user2 ) Otherwise executing it via SVDRP: HITK Commands HITK 1 HITK BACK works as expected ( Comand window opens , CD gets ejected ( Menu No 1 ) and BACK does nothing. when I define: ... User2 Commands 1 ... its also working as expected. Why does BACK break the command before ? -- Helmut Auer, helmut(a)helmutauer.de

2 1

MP3-plugin problems with slow cpu
by Markku Tavasti 06 May '05

06 May '05

I was complaining earlier mp3-plugin is unstable with dxr3. However, now I have FF card on other system, and similar unstability there also. Both systems are with splow cpu. DXR3 is on P350, and now testing with P266. Everything works fine, but then after 5-500 minutes remote stops working, and 5-60 seconds after that music stops playing. Sometimes vdr restarts (with watchdog), sometimes not. On dxr3 system I have tested only with vdr-1.3.23 (http://www.e-tobi.net/vdrdevel/sarge/experimental/ multipatch) On FF+P266 system I tested: - vdr-1.3.23 * http://www.e-tobi.net/vdrdevel/sarge/experimental/ multipatch * http://www.e-tobi.net/vdrdevel/sarge/experimental/ standard - vdr-1.3.17 * http://www.e-tobi.net/vdrdevel/sarge/testing/ multipatch I run mp3 plugin showing track title & progressbar. Normally I have background scanner running, but I had one crash also without it. I suppose recording during listening music makes things worse. I suppose this might be possible to fix, since system is responsive and working, but on some point it stops working totally. Anybody else similar experiences? -- M. Tavasti / tavasti(a)tavastisolutions.com / +358-40-5078254

3 6

Recording HD with full featured device
by Michal Dobrzynski 06 May '05

06 May '05

Hi, I was just wondering whether there is any sort of workaround if I want to record (but not view or replay) HD recording on a VDR setup. I use a full featured DVB-S device for output and it crashes if a HD stream is passed to it. I would like to use the HD recording for transcoding to xvid and and I think it would be great if I could take advantage of my VDR box for scheduling and recording rather than having to build a second box (or buy another DVB-T card) especially since the HD stream is already available to VDR on the same frequency while I'm watching and/or recording the SD stream. Would it be possible to mark channels as HD in the Channels menu and then have an option to not send those channels or their recordings to the output device? It would seem like a relatively easy patch but I'm not confident in my ability to make it myself. Regards, Michal

1 0

transfron compile error
by Patrick Maier 06 May '05

06 May '05

Hi, Ive tried to compile transfron 0.3.2 with VDR 1.3.23 but without success. Does anyone know how to correct that problem? make[1]: Entering directory `/usr/local/video/vdr-1.3.23/PLUGINS/src/transfron' g++ -Wall -Woverloaded-virtual -Werror -O2 -DPLUGIN_NAME_I18N='"transfron"' -I../../../include -I../../../../DVB/include -c schedule.cpp schedule.cpp: In member function `void TFScheduleItem::select(bool)': schedule.cpp:74: error: `clrBackground' undeclared (first use this function) schedule.cpp:74: error: (Each undeclared identifier is reported only once for each function it appears in.) schedule.cpp:74: error: `SetColor' undeclared (first use this function) schedule.cpp:78: error: `userColor' undeclared (first use this function) schedule.cpp: In member function `eOSState TFScheduleMenu::convProtocol()': schedule.cpp:111: error: `Interface' undeclared (first use this function) make[1]: *** [schedule.o] Error 1 make[1]: Leaving directory `/usr/local/video/vdr-1.3.23/PLUGINS/src/transfron' Greets Patrick -- There are only 10 kind of people who understand binary digits: Those who do - Those who don't...

4 6

VDR sounds through a soundcard
by Jarkko Järvinen 05 May '05

05 May '05

Hi, For some reason all the sounds from my Hauppauge DVB-C card died (both from the stereo plug and the J2 connector). The card is very likely broken. It seems that the card isn't produced anymore, so it might be really hard to replace it. Is there any relatively easy way of getting the sounds out of a soundcard instead of the DVB-card? I have a spare Trust 514DX which is Alsa compatible. Any ideas? Thanks beforehand, Jarkko

2 1

[Announce] VDR-Maintainance-Patch f. 1.3.23
by Joachim Wilke 05 May '05

05 May '05

Hello everyone, I have created a "maintainance-patch", which does daily housekeeping-tasks at a predefined time. This tasks are: - automatic calling of noad for new recordings - cut all recordings, marked as ready before Till now, pressing '2' in a recording starts the cutting immediately. Now, you have the possibility to press '3' and mark this recording as "ready for cutting". Cutting is then done during the next maintainance run. Pressing '3' again removes the ready mark. You can see the current status of a recording in the Recordings overview. Recordings marked for cutting are indicated with a "+"-sign. In the Settings-Menu you can setup the different features in the new "Maintainance"-submenu. For those of you interested, you can download the patch from: http://joachim-wilke.de/vdr-patches.xml Joachim.

1 0

Diskspace Calculation (Time left for recordings)
by Manuel Hartl 05 May '05

05 May '05

hi i know HD recording is rather new, but it renders the calculation of the "Recordings time left" a little bit useless?! i think we need a second calculation for HD material. just an idea... manuel.

2 1

1.3.22: memory leaks
by s.huelswitt＠gmx.de 05 May '05

05 May '05

Hi, while investigating VDR with valgrind and other memory tracing tools, I found two places where memory leaks. First is in dvbplayer.c, where the Action() code builds a frame from the replayed file (readFrame). If the ringbuffer is already full, this frame cannot be put immediately. If Empty() is called in such a situation, the premade frame is lost. Solution: --- dvbplayer.c 2005-01-14 15:00:56.000000000 +0100 +++ dvbplayer.c 2005-03-26 21:41:23.000000000 +0100 @@ -296,6 +296,7 @@ nonBlockingFileReader->Clear(); if ((readIndex = backTrace->Get(playDir == pdForward)) < 0) readIndex = writeIndex; + delete readFrame; readFrame = NULL; playFrame = NULL; ringBuffer->Clear(); Second is in epg.c tComponent::FromString(). I cannot find anything bad with the code there, but valgrind reports a lot of memory leaks with the sscanf() call. So I guessed that sscanf() is leaking internaly when used with "%a[\n]" (at least with my glibc version 2.2.5). After changing to code to the suggestion below, the leaks disappeared: --- epg.c 2005-02-19 12:35:00.000000000 +0100 +++ epg.c 2005-03-27 10:53:06.000000000 +0200 @@ -28,13 +28,12 @@ bool tComponent::FromString(const char *s) { unsigned int Stream, Type; - int n = sscanf(s, "%X %02X %3c %a[^\n]", &Stream, &Type, language, &description); - if (n != 4) + char buf[512]; + int n = sscanf(s, "%X %02X %3c %511[^\n]", &Stream, &Type, language, buf); + if (n==4 && !isempty(buf)) + description = strdup(buf); + else description = NULL; - else if (isempty(description)) { - free(description); - description = NULL; - } stream = Stream; type = Type; return n >= 3; Regards. -- Stefan Huelswitt s.huelswitt(a)gmx.de | http://www.muempf.de/

6 13

SemiOT: vdr, suse, aver 771
by mc8647 04 May '05

04 May '05

I have an aver 771 (DVB-T) that I'd like to integrate into my vdr box actually running on Suse 8.1 and a Nexus. I read somewhere that tha aver card has better support in kernel 2.6 so I'm ready to update in-place to Suse 9.2. Please stop me if you think that the update will have no benefit or give me some clues on better integrating the Aver card. Thank you, Francesco

1 0

initial tuning file
by tony 04 May '05

04 May '05

Hello, I have discovered that France Television is free to air in DVB on Atlantic Bird 5W. Does anyone have an initial tuning file for this satellite please? TIA Tony

8 15

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr