vdr

vdr@linuxtv.org

2 participants
6731 discussions

1.3 DVB-S FF and sc plugin
by Kim Patovaara 27 Apr '05

27 Apr '05

Hi, Is it possible to use this FF card with sc plugin and share card with Technisat budget DVB-S card. If it is posible is there some restrictions like not possible to receive whole mux with FF card ? Kim

7 8

RE: [vdr] vdr-1.3.23 + xine-0.7.3-network problems
by Rantanen Teemu 26 Apr '05

26 Apr '05

Reinhard Nissl wrote: > Strange is, that you have that large numbers in CLEAR(...). I'd say, > vdr-xine and input_vdr.[ch] do not match. The number in brackets is a > sequence number, and typically it matches the number which vdr-xine > outputs. I've used it to debug some deadlock situations before I've > released 0.7.3. How do I know if they match or not? I took them from Peter's site: http://mitglied.lycos.de/peterweber69/xine/xine.htm I have 2 versions of xine installed into separate directories, and there is of course a small change that I've forgot to update some path somewhere, but I've double checked them so many times that I don't think that could be the cause. Teemu

1 0

RE: [vdr] vdr-1.3.23 + xine-0.7.3-network problems
by Rantanen Teemu 26 Apr '05

26 Apr '05

Reinhard Nissl wrote: > Previously, when a PTS wrap happend, xine stopped > replay for about 26.5 hours. Heh, that's a quite long time... but still I'd prefer the picture to jump rather than audio... > Did you patch VDR-1.3.23 with vdr-1.3.23-dvbplayer3.patch? Yes I did. In 1.3.22+0.7.2 combo I have the very first (if I remember correctly) dvbplayer patch sent to the list. > If this patch doesn't fix the rewind issue, would you please be so kind > and explain in detail, what's going wrong? When I press e.g. ff-rewind, VDR starts to rewind, but the rewind picture updates do not happen as often as they should (perhaps 3 picture updates / second). And after few seconds the rewind freezes completely as if I had pressed pause. Pressing play at that point does not do anything at first, but after waiting for some time VDR wakes up again and continues normal playback. > Please include the output of VDR and xine --verbose=2 when you select > rewind. I forgot to pipe VDR output to file, but for xine output see here: http://tvr.dy.fi/xine.log I started vdr, then started xine, went directly to a recording, started ff-rewind, waited few seconds until it got stuck, waited for some time (this time vdr didn't wake up, I may have pressed play couple more times), pressed finally q in xine to quit. Teemu

2 1

RE: [vdr] vdr-1.3.23 + xine-0.7.3-network problems
by Rantanen Teemu 26 Apr '05

26 Apr '05

Jouni Karvo writes: > try defining WRAP_THRESHOLD 200000 in xineDevice.c - this helped a lot > in my case. (with non-network xine) It took me some time to find the place for this (not in xineDevice.c), but I changed it and now the live tv seems to be working. Teemu

1 0

AW: Re: [vdr] [ANNOUNCE] vdr-xine-0.7.3 via network without streamdev
by peter_weber69 26 Apr '05

26 Apr '05

Hi, Only for xine-0.7.2. you can find it on my Homepage. bye > Von: Jose Alberto Reguero <jareguero(a)telefonica.net> > An: Klaus Schmid inger's VDR <vdr(a)linuxtv.org> > Betreff: Re: [vdr] [ANNOUNCE] vdr-xine-0 7.3 via network without streamdev > Datum: Tue, 26 Apr 2005 13:45:09 +0 200 > <pre>Do you have a separate network patch o xine-plugin and netw ork patch to appply > to xine-lib? > Thanks. > Jose Alberto > > El Miércoles, 13 de Abril de 2005 13:09, peter_weber69 escribió: > > Hi, > > > > xine-plugin on Server, only xine-player on client > > > > File s on my Homepage: > > <a href=http://mitglied.lycos.de/peterweber69/>htt p://mitglied.lycos.de/peterweber69/</a>> > > direct: > > <a href=http:/ /mitglied.lycos.de/peterweber69/xine/xine.htm>http://mitglied.lycos.de/pe terweber69/xine/xine.htm</a>> > > see also (german): > > <a href=http:/ /www.vdr-portal.de/board/thread.php?threadid=32770&sid=>http://www.vdr-po rtal.de/board/thread.php?threadid=32770&sid=</a>> > > best regards, > > peter > > > > Nutzen Sie Outlook für Lycos Mail! - > > <a href=http:/ /mail.lycos.de/app/lycosinside/setupLI.exe>http://mail.lycos.de/app/lycos inside/setupLI.exe</a> > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > <a href=http://www.linuxtv.org /cgi-bin/mailman/listinfo/vdr>http://www.linuxtv.org/cgi-bin/mailman/list info/vdr</a> > </pre> Nutzen Sie Outlook für Lycos Mail! - http://mail.lycos.de/app/lycosinside/setupLI.exe

1 0

[ANNOUNCE] vdr-xine-0.7.3 via network without streamdev
by peter_weber69 26 Apr '05

26 Apr '05

Hi, xine-plugin on Server, only xine-player on client Files on my Homepage: http://mitglied.lycos.de/peterweber69/ direct: http://mitglied.lycos.de/peterweber69/xine/xine.htm see also (german): http://www.vdr-portal.de/board/thread.php?threadid=32770&sid= best regards, peter Nutzen Sie Outlook für Lycos Mail! - http://mail.lycos.de/app/lycosinside/setupLI.exe

3 2

RE: [vdr] 1.3 DVB-S FF and sc plugin
by jori.hamalainen＠teliasonera.com 26 Apr '05

26 Apr '05

> If the HW decoding is the keyword and software decoding is > "illegal", then I guess duplicating subscription cards should > be legal, as long as they are used in STB:s with hardware decoders. I think SC as a CA module isn't illegal itself, because SC itself isn't sufficient to circumvent content protection (needs keys). But SC might have licensing problems if it uses patented technology to decrypt stream, for example Conax. And from that point it is illegal. If someone interprets that SC software is illegal because it can be used for emulating CA-module, then also RSA/DES/DSA/... -libraries would become illegal because they also can be used to decrypt the same data. Its a line drawn in water. Are Magic/Matrix/Joker CAs (what ever there are) illegal? They are ARM-boards, and into it you can load software which emulates multiple CA-systems, and you can insert a valid subscription card. Those fulfill the dedicated hardware part. > Could someone tell which countries have legislation that > dictates that CA channels should be decoded in hardware and > using software is illegal? And as we all know valid CA modules are software solutions also.. :-) They just embed StrongArm or similar processor. Of course there might be some card with custom crypto chip existing. This stuff goes on and goes on. Am I breaking some law because if I watch TV programs via DVI and not via HDCP / HDMI which is required by film studios etc. Best regards, Jori

1 0

Audio menu problems
by anders＠sandell.net 25 Apr '05

25 Apr '05

Hi all, I have problems with the audio menu when playing a recording. When playing a recording from channels like Eurosport or Nickelodeon that have two audio tracks and two languaghes in each track the audio menu will only appear if i press the audio button immedialety after starting the replay. Sometimes the audio menu wont show until after several stop/start replay attempts. During normal viewing the audio menu pop up as expected. I am running vdr 1.3.23 on a system with Fedora Core 2. Any help is appreciated. Kind regards Anders

1 0

RE: [vdr] HDTV recording with VDR, some results
by jori.hamalainen＠teliasonera.com 25 Apr '05

25 Apr '05

> > Does prosieben actually work in Finland? > > My dish setup is as follows: > > 1) Triax multifocus with four LNB:s > Astra1, Hotbird, Sirius and Thor > (S19.2E, S13.0E, S5.0E, S1.0W) > > 2) A regular 80cm dish for Eurobird/Astra2 (S28.2E) Well my setup is 85cm single focus dish with 4 LNB's, similar to above setup "1". And I live in same region as previous example was (Tampere, Finland). And I can receive signals well with cheapo LNB's and, 4-in-1 switch, 30m cable and 2-in-1 intelligent receiver switch (which receiver is on, VDR or normal satellitebox). So there is a lot of dB loss on my setup. But on Astra I am just on green side.. :) And the weather during the capture was clear. http://www.jori.ws:81/qwerty/vdr.jpg Best regards, Jori

3 2

Re: [vdr] Help on some decisions...
by Stephan Loescher 25 Apr '05

25 Apr '05

Björn Fischer <thebear80(a)gmx.net> writes: Hi! > So far the hardware. Now I need Software... I tought about using the > LinVDR distribution, but I also want to use the computer as a > file-server, and therefore I think that LinVDR is a bit too > restrictive, so I will use a "standard" distribution. This will then > probably be Gentoo. Any Problem with that? I use Gentoo for my "VDR-and-everything-server". There is no Problem. (I do not use the Gentoo-VDR, because I migrated from Suse to Gentoo and used to compile VDR myself. But there should be no problems...) The main advantage of Gentoo: You are not forced to do a classical migration from version X to Y (eg. Suse 9.0 to 9.1). You can update your Linux whenever you want/need in whole or in part. I find this very useful, because my VDR can not have long downtimes. No VDR - no TV, you know :-) Stephan. -- loescher(a)gmx.de http://www.loescher-online.de/ Try LEO: http://www.leo.org/

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr