Hi there, I am new to VDR and to DVB-T and I have been trying to configure VDR 1.3.34to work with 2 Hauppauge Nova-T DVB-T cards under Debian (kernel 2.6.13) and have run into some problems. Can someone confirm that the output of dmesg (below) looks to be ok in respect of the NOVA-T cards? dmesg output; cx2388x v4l2 driver version 0.0.5 loaded PCI: Found IRQ 5 for device 0000:02:0a.0 PCI: Sharing IRQ 5 with 0000:02:0a.2 PCI: Sharing IRQ 5 with 0000:02:0a.4 cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx88[0]: hauppauge eeprom: model=90002, tuner=76 cx88[0]: registered IR remote control cx88[0]/0: found at 0000:02:0a.0, rev: 5, irq: 5, latency: 64, mmio: 0xf4000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 PCI: Found IRQ 11 for device 0000:02:0b.0 PCI: Sharing IRQ 11 with 0000:00:1d.7 PCI: Sharing IRQ 11 with 0000:02:0b.2 PCI: Sharing IRQ 11 with 0000:02:0b.4 cx88[1]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18,autodetected] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe cx88[1]: hauppauge eeprom: model=90002, tuner=76 cx88[1]: registered IR remote control cx88[1]/0: found at 0000:02:0b.0, rev: 5, irq: 11, latency: 64, mmio: 0xf1000000 cx88[1]/0: registered device video1 [v4l2] cx88[1]/0: registered device vbi1 cx2388x blackbird driver version 0.0.5 loaded When we run w_scan to generate channels.conf we get the following error; moon2:/tmp/w_scan# ./w_scan -o3 >> /var/lib/vdrdevel/channels.conf Info: using DVB adapter auto detection. Info: unable to open frontend /dev/dvb/adapter0/frontend0' Info: unable to open frontend /dev/dvb/adapter1/frontend0' Info: unable to open frontend /dev/dvb/adapter2/frontend0' Info: unable to open frontend /dev/dvb/adapter3/frontend0' main:1779: FATAL: ***** NO USEABLE DVB CARD FOUND. ***** Please check wether dvb driver is loaded and verify that no dvb application (i.e. vdr) is running. Any help would be greatly appreciated. Thanks in advance. Andrew