Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe. The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today. I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/linux-dvb@linuxtv.org/msg27438.html a patch i have done.
c
Edgar (gimli) Hucek
On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote:
Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe. The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today. I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/linux-dvb@linuxtv.org/msg27438.html a patch i have done.
c
Edgar (gimli) Hucek
Oh, nice one, could you correct my update on your work for multiproto_plus : http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html
I must have different hardware because all works just fine here...
Thanks,
On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote:
Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe. The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today. I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/linux-dvb@linuxtv.org/msg27438.html a patch i have done.
c
Edgar (gimli) Hucek
Oh, nice one, could you correct my update on your work for multiproto_plus : http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html
I must have different hardware because all works just fine here...
I use a WinTV Nova HD S2. As soon i have time i'll check your latest patch and the new multiproto_plus tree.
cu
Edgar (gimli) Hucek
Thanks,
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre
Hi,
sorry, took a little bit longer to find time for made the patch. This patch is against multiproto_plus + HVR-4000-multiproto_plus-2008-04-25.diff. With this combination i'm able to tune all HDTV channels on Astra 19.2E. My Hardware is a WinTV Nova HD S2.
cu
Edgar (gimli) Hucek
On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote:
Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe. The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today. I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/linux-dvb@linuxtv.org/msg27438.html a patch i have done.
c
Edgar (gimli) Hucek
Oh, nice one, could you correct my update on your work for multiproto_plus : http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html
I must have different hardware because all works just fine here...
Thanks,
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre
On Fri, May 02, 2008 at 12:03:48AM +0200, gimli wrote:
Hi,
sorry, took a little bit longer to find time for made the patch. This patch is against multiproto_plus + HVR-4000-multiproto_plus-2008-04-25.diff. With this combination i'm able to tune all HDTV channels on Astra 19.2E. My Hardware is a WinTV Nova HD S2.
With this new patch, there is no change for me, which is fine, because everything was already working so it don't break anything here :-)
I attach an all in one patch just to be easier to follow, and as you wrote it to VDR's ml, I sent a copy there also.
Steven and Manu : could it be included into multiproto_plus ?
Thanks you very much,
Gregoire Favre wrote:
On Fri, May 02, 2008 at 12:03:48AM +0200, gimli wrote:
Hi,
sorry, took a little bit longer to find time for made the patch. This patch is against multiproto_plus + HVR-4000-multiproto_plus-2008-04-25.diff. With this combination i'm able to tune all HDTV channels on Astra 19.2E. My Hardware is a WinTV Nova HD S2.
With this new patch, there is no change for me, which is fine, because everything was already working so it don't break anything here :-)
I attach an all in one patch just to be easier to follow, and as you wrote it to VDR's ml, I sent a copy there also.
Steven and Manu : could it be included into multiproto_plus ?
after this patch the multiproto_plus does not compile against my older kernel (suse 10.2 stock kernel 2.6.18)
On Fri, May 02, 2008 at 01:15:45PM +0200, Lars Bläser wrote:
after this patch the multiproto_plus does not compile against my older kernel (suse 10.2 stock kernel 2.6.18)
Have you replaced linux/include/linux/compiler.h with the one from your kernel ? (in multiproto_plus dir) if that's going to be included, this shouldn't be in of course.
Gregoire Favre wrote:
On Fri, May 02, 2008 at 01:15:45PM +0200, Lars Bläser wrote:
after this patch the multiproto_plus does not compile against my older kernel (suse 10.2 stock kernel 2.6.18)
Have you replaced linux/include/linux/compiler.h with the one from your kernel ? (in multiproto_plus dir) if that's going to be included, this shouldn't be in of course.
your patch included the compiler.h, after replacing it with the right one the drivers are build your patch also created a .config.old in v4l and the cx88 modules are not build (the .config created during make does only contain inaktive lines for cx88 modules), i modified the .config manual and started make again
On Fri, May 02, 2008 at 06:12:53PM +0200, Lars Bläser wrote:
Have you replaced linux/include/linux/compiler.h with the one from your kernel ? (in multiproto_plus dir) if that's going to be included, this shouldn't be in of course.
your patch included the compiler.h, after replacing it with the right one the drivers are build your patch also created a .config.old in v4l and the cx88 modules are not build (the .config created during make does only contain inaktive lines for cx88 modules), i modified the .config manual and started make again
OK, here's one without compiler.h and without .config.old (by the way, I don't understand why make distclean didn't remove it...).
Good new, such way the patch is even smaller, so it would be really good to have it included finally into the repo :-)
Any objection to the inclusion ?
Have you replaced linux/include/linux/compiler.h with the one from your kernel ? (in multiproto_plus dir) if that's going to be included, this shouldn't be in of course.
your patch included the compiler.h, after replacing it with the right one the drivers are build your patch also created a .config.old in v4l and the cx88 modules are not build (the .config created during make does only contain inaktive lines for cx88 modules), i modified the .config manual and started make again
OK, here's one without compiler.h and without .config.old (by the way, I don't understand why make distclean didn't remove it...).
Good new, such way the patch is even smaller, so it would be really good to have it included finally into the repo :-)
Any objection to the inclusion ?
with this patch I have the error
May 3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument
when I try to tune on dvb-s2 channels on VDR
But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me
Igor
sorry, I was wrong
with the latest cumulative hvr4000-patch from Gregoire HVR-4000-multiproto_plus-2008-05-02.diff.bz2 I can tune on dvb-s2 channels on my VDR 170
this patch is OK for me
@Gregoire thank you very much
Igor
-----Original Message----- From: Igor goga777@bk.ru To: VDR Mailing List vdr@linuxtv.org Date: Sat, 03 May 2008 22:51:26 +0400 Subject: Re: [linux-dvb][vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
Have you replaced linux/include/linux/compiler.h with the one from your kernel ? (in multiproto_plus dir) if that's going to be included, this shouldn't be in of course.
your patch included the compiler.h, after replacing it with the right one the drivers are build your patch also created a .config.old in v4l and the cx88 modules are not build (the .config created during make does only contain inaktive lines for cx88 modules), i modified the .config manual and started make again
OK, here's one without compiler.h and without .config.old (by the way, I don't understand why make distclean didn't remove it...).
Good new, such way the patch is even smaller, so it would be really good to have it included finally into the repo :-)
Any objection to the inclusion ?
with this patch I have the error
May 3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument
when I try to tune on dvb-s2 channels on VDR
But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me
with this patch I could receive dvb-s2 channels on my VDR 170 I don't have the error
May 3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument
anymore @gilmi thanks
Igor
sorry, took a little bit longer to find time for made the patch. This patch is against multiproto_plus + HVR-4000-multiproto_plus-2008-04-25.diff. With this combination i'm able to tune all HDTV channels on Astra 19.2E. My Hardware is a WinTV Nova HD S2.
cu
Edgar (gimli) Hucek
On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote:
Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe. The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today. I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/linux-dvb@linuxtv.org/msg27438.html a patch i have done.
c
Edgar (gimli) Hucek
Oh, nice one, could you correct my update on your work for multiproto_plus : http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html
I must have different hardware because all works just fine here...
Thanks,
GrИgoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre
ATTACHMENT: application/octet-stream (HVR-4000-multiproto_plus-2008-04-25_inversion.diff)
Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe.
do you mean my hvr4000-problem with ERROR (dvbdevice.c,302): Invalid argument ??
The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today.
it will be fine
I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/linux-dvb@linuxtv.org/msg27438.html a patch i have done.
there's January hvr4000 patch http://www.linuxtv.org/pipermail/linux-dvb/2008-January/023390.html
and multifrontend patch http://www.linuxtv.org/pipermail/linux-dvb/2008-January/023416.html
may be they will help to you
Igor
-
gimli -
Gregoire Favre -
Igor -
Lars Bläser