vdr January 2006

vdr@linuxtv.org

153 participants
203 discussions

VDR 1.3.37 not recording to multpile video partitions.
by Dave 23 Jan '06

23 Jan '06

I have an issue with 1.3.37 version VDR not recording to any other partition other than /video0. VDR sees the recordings taped onto the disk from previous versions, and will play/delete them, but VDR always insists on recording to the basically full /video0 when /video1 is only half full. Was there a fix/patch for this that I missed? I need this version to work. .38 thru to .40 work fine Thanks!

1 0

Yaepg plugin problem
by Mlists 23 Jan '06

23 Jan '06

Hi there, I have compiled yaepg successfully with vdr-1.3.38 and have now upgraded to vdr-1.3.40. This problem happens on both and I'm hoping its a quick fix. When I select on the plugin to go 'up' or 'down' in channel numbers when I press page up/page down it goes in the right direction but the channels listed in the display go the opposite direction! Very odd! Anyone see this and any ideas how to fix? Norm

1 0

About Buffer reserve and 1.3.40
by Lauri Tischler 22 Jan '06

22 Jan '06

--- klip --- Disabled the "buffer reserve" in Transfer Mode. Last chance to complain if you really need it it will be completely removed in the next version. If you are experiencing problems with a/v running out of sync, try the latest driver and firmware (if you are using a full featured DVB card). -- klip -- I'm running kernel 2.6.15 with included drivers, so that should qualify. What is considered 'latest firmware' ? I mean oldest that works, latest's usually have problems. - 261c - 261d - 261f - 262 - 263

2 1

[ANNOUNCE] VDR developer version 1.3.40
by Klaus Schmidinger 22 Jan '06

22 Jan '06

VDR developer version 1.3.40 is now available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.3.40.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.3.39-40.diff The changes since version 1.3.39: - Fixed a second place where a message should be given when an instant recording is started (reported by Jesus Bravo Alvarez). - Modified logging so that even on NPTL systems each line in the log file shows the individual thread's pid (based on a suggestion from Francois-Xavier Kowalski). - Fixed a problem with @plugin in keymacros.conf in case the named plugin is not loaded (reported by Franz Gangkofer). - Fixed a crash after executing the SVDRP command CLRE, caused by dangling 'schedule' pointers from cChannel objects (reported by Malte Schröder). - Updated the Finnish OSD texts (thanks to Rolf Ahrenberg). - Improved NULL checking in strreplace(). - Fixed a crash in the Schedule menu with events that have no title (reported by Rolf Ahrenberg). cEvent::FixEpgBugs() now assigns a "No title" string to events that have no title. - Updated the Estonian OSD texts (thanks to Arthur Konovalov). - Recordings are now only started if there is at least 300MB free disk space (suggested by Markus Hahn). - When entering text via the numeric keys, the cursor now automatically advances (based on a patch from Rolf Ahrenberg). - Updated the Polish OSD texts and the fontosd-iso8859-2.c file (thanks to Jaroslaw Swierczynski). - Disabled the "buffer reserve" in Transfer Mode. Last chance to complain if you really need it - it will be completely removed in the next version. If you are experiencing problems with a/v running out of sync, try the latest driver and firmware (if you are using a full featured DVB card). - Switching channels with the Up/Down or Channel+/Channel- keys now works a lot faster when the repeat function kicks in, by not actually switching the channel every time, but rather only displaying the channel info and doing the final switch when the key is released. - The channel display is now updated _before_ the channel is switched. - Added a missing initialization of 'timeout' in the cDisplayChannel constructor. - Fixed detecting if there can be any useful further input when entering channel numbers (thanks to Thomas Bergwinkl). - Updated the Spanish OSD texts (thanks to Jesus Bravo Alvarez). - Fixed handling the '0' key for switching between the last two channels (thanks to Thomas Bergwinkl). Have fun! Klaus

1 0

[ANNOUNCE] vdr-filebrowser-0.0.3
by Holger Brunn 22 Jan '06

22 Jan '06

Hello list, I'm glad to announce a new version of the filebrowser plugin, you can get it from http://www.stud.uni-karlsruhe.de/~uqg8/vdr/filebrowser/vdr-filebrowser-0.0.… There have been some important fixes/enhancements, so I recommend to everyone who has an older version to update: - Fixed running threads not being killed properly when vdr shuts down - Added number keys for menuothercommands - Possibility to pause/resume commands - Show full path in title, add possibility to turn this off (suggested by Ronny Kornexl) - Changed sort order to have [..] as first entry in all cases (thanks to Ronny Kornexl) - Use IFS[0] instead of hardcoded blank for separating commandline arguments - Added a flag (r) to have threads removed automaticially (if they ended without error) - File view is updated when a thread finishes - Fixed some idiocy concerning my use of fork/exec - fixes threads not showing up as finished and some other weird ones - No need to patch vdr sources any more (vdr >= 1.3.38) For people not knowing what's this all about, a readme file is provided on http://www.stud.uni-karlsruhe.de/~uqg8/vdr/filebrowser Your comments, bug reports and patches would be appreciated, regards Holger

1 0

Trouble with conditional access
by Pierre JUHEN 22 Jan '06

22 Jan '06

Hi, I built a vdr box, with a Viaccess CAM, to access TPS. CAM module is detetected correctly. I can access the smartcard data through the menu. my ca.conf has a line : 10002 TPS WHen I try to put a line "CaCaps = 1 10002" in setup.conf , this line is removed when vdr is launched. I get "Channel not available" when I try to go to a TPS channel. I run vdr 1.3.36 on a Fedora Core 4 using livna RPMs. I am lost. Thank you for your help. Pierre JUHEN

9 42

[ANNOUNCE] vdr-image-0.2.5
by Andreas Brachold 22 Jan '06

22 Jan '06

Hello, here are a update of vdr-image plugin... Now ================= * Bounce to vdr-1.3.38 (required now vdr-1.3.38 or newer) * add exif support, show vdr info screen (required libexif) now inital rotation depends founded exif data but this feature could disable with "make plugins WITHOUT_LIBEXIF=1" * update any translations via babelfish If you mean that the translation are incorrect, which is very probable, please send me a corrected i18n.c file. Changes ================= - split exif page to two page for tags and marker nodes - fix wrong limits on NTSC zoom mode - fix consider the border values at zoom mode - fix first image was'nt rotation depends founded exif data - fix show vdr info screen via official vdr way - fix build failed without defined FFMDIR - add italian/dutch/portuguese/spanish translations via babelfish - add contrib/show-raw-digital-photo.patch for anytopnm to show raw digital photo from many digital cameras. - add russian translation - add french translation - prepare for Hrvatski/Eesti/Dansk translation - Updated finnish translations. (Thanks to Rolf Ahrenberg) What is it : ============ This is a plugin for vdr and allows the display of digital images, like jpeg, tiff, png, bmp and some more, on the TV screen, using the DVB out device from vdr. Depends: ======== see included README for more details netpbm, or as alternative imagemagick ffmpeg libexif Link : ====== Homepage : http://vdr-image.berlios.de/ Download : http://download.berlios.de/vdr-image/vdr-image-0.2.5.tar.gz Cu, Andreas

1 0

Bug in VDRadmin-0.97-am3.3
by Pasi Juppo 21 Jan '06

21 Jan '06

Noticed a bug in VDRAdmin when adding an autotimer via TV-onscreen. In case the title had exclamination character (!) in the name (in this case it was the last characher: Start!) autotimer could not find the title from EPG and therefore could not add new timer. Once the character was removed the title was found and new timer was added. Br, Pasi

1 0

DVD audio output problem
by Paavo Hartikainen 21 Jan '06

21 Jan '06

DVD plugin seems to work well, except for audio. I only got noise from analog output of TechnoTrend DVB-C 2.1. I suppose there is byteswap problem when running on big-endian system. Configuration: PowerPC 604e Linux 2.6.14 Debian GNU vdr (1.3.37) dvd (0.3.6-b03) -- "pienena / Paavo "Rainbow Rat" Hartikainen minusta / E-mail: pahartik(a)sci.fi tulee / URL: http://www.sci.fi/~pahartik/ rotta" / EFnet: pahartik at #Atari and #LionKing

2 2

SourceCaps patch for VDR 1.3.39.
by Carsten Koch 21 Jan '06

21 Jan '06

The attached patch allows a VDR system with multiple cards to attach each card to an individual dish pointing at a different satellite. I have 3 DVB cards in my VDR system: 1) FF card connected to one output of LNB at a dish pointed at Astra 19.2E. 2) budget card connected to another output of LNB at a dish pointed at Astra 19.2E. 3) budget card connected to output of LNB at a dish pointed at Eutelsat 13.0E. I am using the following entries for that in my setup.conf: SourceCaps = 1 S19.2E SourceCaps = 2 S19.2E SourceCaps = 3 S13.0E

1 0

← Newer
1
...
5
6
7
8
9
10
11
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr January 2006