vdr

vdr@linuxtv.org

2 participants
6731 discussions

Re: [vdr] Arabic language EPG is inappropriately displayed
by semsem85 sami 30 Sep '10

30 Sep '10

>Please let me know whether it actually works as expected. >Klaus I tested it today by upgrading to yavdr 0.3, and Arabic language is working perfectly:) Thanks alot Klaus for your help. Regards Sami

1 0

.TS recordings
by Dominic Evans 29 Sep '10

29 Sep '10

For reason, when playing back 1 out of every 10 .ts recordings (from vdr 1.7.x) in XBMC, it is unable to skip forwards through the recording, instead it just jumps back to the start of the recording (00:00). Any idea why this might be? Cheers, Dom

1 1

Fwd: Re: vdr xine-lib eac3
by dplu 26 Sep '10

26 Sep '10

Hi I use a "recent" ffmepg , I can use ffplay to play the ts records and I have sound, even with the e-ac3 spectral extention available in France on DVB-T HD Some others French user will try from their side also and I will check asap my patch and libs ... and install the very latest ffmpeg from git Thanks for the job Regards Le Sunday 26 September 2010 20:47:04 Jose Alberto Reguero, vous avez écrit : > El Domingo 26 Septiembre 2010, dplu escribió: > > Hi > > > > I Just test your patch, thanks for it, it applied well but seems not > > working, no e-ac3 sound on sample e-ac3 record for French DVB-T but AC3 > > sound is still OK > > > > Which xine-lib 1.2 did you use ? this one : > > http://hg.debian.org/hg/xine-lib/xine-lib-1.2/ > > is not allways well synchronized, for example the patch for demux_ts on > > 1.1.18 changeset a1ba73e0b475 (april 9) is not on 1.2 > > > > I will check another time to see if I made no error on patching > > > > Regards > > You need a recent ffmpeg. I use latest hg xine-lib-1.2, and latest ffmpeg > svn. > > Jose Alberto. > > > Le Tuesday 21 September 2010 00:57:39 Jose Alberto Reguero, vous avez > > écrit : > > > El Domingo, 13 de Junio de 2010, Luca Olivetti escribió: > > > > Al 25/03/10 16:08, En/na Jose Alberto Reguero ha escrit: > > > > > Patch for xine-lib that don't need to patch remux.c to work. > > > > > > > > Today I applied this patch (strange it isn't in xine-lib-1.2 yet) but > > > > there's still no sound on tvehd (vdr 1.7.15, vdr-xine and playing the > > > > ts directly through xine). > > > > Do I need some special options to configure xine-lib for this patch > > > > to take effect? > > > > > > > > Bye > > > > > > With this two patches vdr-xine work with eac3. I can't test if it still > > > work with normal ac3. One patch is for the plugin, and the other is for > > > xine-lib 1.2. > > > > > > Jose Alberto > > > > _______________________________________________ > > vdr mailing list > > vdr(a)linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr -------------------------------------------------------

1 0

streamdev CVS - recent tarball?
by Gavin Hamill 26 Sep '10

26 Sep '10

Hi, I'm trying to compile streamdev 0.5.0 on an elderly 2006 Ubuntu and am getting some compile errors. Frank Schmirler says the current CVS contains fixes for that, but the CVS server at vdr-developer.org is down. Does anyone have a recent CVS checkout they wouldn't mind sending me? streamdev is the last thing I need to finally upgrade from VDR 1.4.7 :) Cheers, Gavin.

3 7

cDvbDevice::Initialize
by syrius.ml＠no-log.org 25 Sep '10

25 Sep '10

Hi, I'm having a setup with 4 dvb cards, and I'm running 3 vdr instances. I'm using an udev rules to make sure adapter numbers don't change. I'm using the -D option the assign cards to vdr instances. I've just discovered that vdr -D 3 would not use the adapter 3 if adapter2 was missing from /dev/dvb/. Here is the patch i'm testing to correct this issue, feel free to comment. --

2 2

Re: [vdr] [PATCH] Add support for shared frondends cards
by support.intranet 25 Sep '10

25 Sep '10

---------- Initial Header ----------- >From : vdr-bounces(a)linuxtv.org To : "VDR Mailing List" vdr(a)linuxtv.org Cc : Date : Wed, 22 Sep 2010 21:41:01 +0100 Subject : Re: [vdr] [PATCH] Add support for shared frondends cards > On 21 Sep 2010, at 16:06, support.intranet wrote: > > > The attached patch (for VDR 1.7.16) implements support for multituner cards where only one tuner can be active at one time, the so called shared frontend cards (notably the HVR-4000 and its derivatives). > > Currently VDR tries to open all the frontends on startup, with the result that the first frontend (usually DVB-S) works, but the second (usually DVB-T) fails with "Device or resource busy" error. The patch adds a new configuration option to setup.conf, called "OnDemand"; it defaults to 0 (exactly the current behaviour). If set to 1, tuners will be appropriately opened and closed when switching channels. I've tested it with the vnsi plugin and XBMC. > > I'd be happy if someone could review it and tell me if there is anything to correct and if it is possible to mainline it. > > Alberto > > <aod.diff>_______________________________________________ > > vdr mailing list > > vdr(a)linuxtv.org > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > > > Ciao Alberto, > > Interesting work. I live in the UK and have an HVR4000 for DVB-S. Unfortunately DVB-T reception is poor where I live (hence the satellite solution - additional multilnb to point at 28.2E and 13.0E for L'Eridita) so I cannot fully test this past patching and compiling which I assume will work as you state you have tested. > > Looking at the patch, there is something about inhibit epgscan. I do not know much about vdr internals. Would patching vdr and enabling the ondemand option stop epg from updating? A slight negative if this is the case. > > > Ian. > > > _______________________________________________ > vdr mailing list > vdr(a)linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > Hi Ian, thanks for your answer. The problem with background epg scan is that it tries to access the device you are not using to watch/record as it thinks it is free, so if I don't disable it your favourite program would be stopped every few moments because the scan is taking place (and it closes down all other devices to access its one). I'm currently working on a better approach to this, so that if VDR is opened but you are not using it epg scan is allowed to work. Alberto

3 3

TechnoTrend T-3000 Hybrid works under VDR?
by Ali H.M. Hoseini 25 Sep '10

25 Sep '10

Hi, Anybody tested DVB-T TechnoTrend T-3000 Hybrid under VDR? I want to order two of this card for VDR installation, and I don't know if it will works well with VDR or not. Sincerely yours. A. Hoseini.

1 0

priorities < 0
by Rainer Blickle 23 Sep '10

23 Sep '10

Hi, i have a question regarding receivers with priority < 0. I have taken a look at cDvbDevice::ProvidesChannel (1.7.15). When priority is < 0 hasPriority gets set to true even if there are other receivers for a different channel. In this case NeedsDetachReceivers is set to false. If cDvbDevice::ProvidesChannel is called with a priority < 0, then the Channel parameter has to be the Channel currently receiving on the device. Why: If the cDvbDevice::ProvidesChannel is called with priority < 0 and a channel other than the current receiving, needsDetachReceived would be kept to false, the receiver would be added the the list of receivers, but the channel doesn't get switched. Or does the Channel doesn't matter if the priority is < 0 ? My question: is my assumption correct ? Regards, Rainer

2 1

[PATCH] Add support for shared frondends cards
by support.intranet 22 Sep '10

22 Sep '10

The attached patch (for VDR 1.7.16) implements support for multituner cards where only one tuner can be active at one time, the so called shared frontend cards (notably the HVR-4000 and its derivatives). Currently VDR tries to open all the frontends on startup, with the result that the first frontend (usually DVB-S) works, but the second (usually DVB-T) fails with "Device or resource busy" error. The patch adds a new configuration option to setup.conf, called "OnDemand"; it defaults to 0 (exactly the current behaviour). If set to 1, tuners will be appropriately opened and closed when switching channels. I've tested it with the vnsi plugin and XBMC. I'd be happy if someone could review it and tell me if there is anything to correct and if it is possible to mainline it. Alberto

2 1

Re: [vdr] Arabic language EPG is inappropriately displayed
by semsem85 sami 21 Sep '10

21 Sep '10

>Please let me know whether it actually works as expected. >Klaus Hi Klaus, I would love to do so now but I am using yavdr 0.2 and waiting for the yavdr team to make the new VDR developer version available to upgrade(As I am new into linux scene and cant build it myself:( Regards Sami

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr