vdr

vdr@linuxtv.org

6731 discussions

System reboots...
by Andrey Kuzmin 25 Oct '06

25 Oct '06

I've compiled vanilla vdr 1.4.3 on fresh Ubuntu installation. When I run vdr, systems goes to reboot without any information. What is the easiest way to figure out what is the reason of reboot? kernel 2.6.15 Nexus WinTV FF card Thanks!

3 3

mini-PCI card suggestion
by Simon Baxter 25 Oct '06

25 Oct '06

I'm building a remote VDR device on a Dell GX260 SFF PC, which has 1x AGP low-rise slot and 1x PCI I'm having trouble finding a selection of video cards which will fit in the SFF case. Can someone recommend a card? It needs to have s-video out (doesn't need to have VGA - but must have s-video/Component/RGB)

1 1

Diseqc setup ?
by Grégoire FAVRE 25 Oct '06

25 Oct '06

Hello, I have just installed a new parabola (BISAT-G3 from http://www.radio-materiel.ch/scripts/rama/fiche.w?ref=BISAT-G3 ) with a nice diseqc (VNE-G3/G4 from http://www.radio-materiel.ch/scripts/rama/fiche.w?ref=VNE-G3%2FG4 ). And if I only use my first FF card it seems to work (only tested on hotbird and astra 19.2E). I used the full diseqc setup found in vdr source archive : is that the right one ? My second FF card don't tune to anything, even if I change the cable from second to first and vice-versa. Using only the budget card seems also to work, but I can't use two cards simultenously... Any idea what to do ? Thank you very much, -- Grégoire FAVRE

2 5

desperated with vdr-burn
by Leo Márquez 25 Oct '06

25 Oct '06

Hi, Finally I'm desperated with vdr-burn. Few days ago I exposed my problem but seems that I'm the one person that experience it. The problem is boost related: terminate called after throwing an instance of 'boost::io::too_many_args' what(): boost::too_many_args: format-string refered to less arguments than were passed Avortat I have tried the libboost debian package and the boost-for-burn that readme says. Is there any boost expert that can explain my problem? I can't believe that anyone known this problem. I have recompiled vdr and plugins many times. I'm desperated with this problem amb my hard disk is full. my vdr is 1.4.3 burn is cvs (I have tried it with pre-20 and pre-21 versions) Thanks for your help.

2 7

Any DST change problems?
by Dave P 24 Oct '06

24 Oct '06

We're coming up to the weekend when Daylight Saving Time ends in Europe. I seem to recall last time I tried this that there were problems with setting timers before the changeover to record programmes after it. Is this still an issue, and if so would restarting VDR after the change help? I see that timers.conf has the events in 'wallclock' time (when setting timers through vdradmin at least). -- Dave

1 0

Hauppage wintv nova-t PCI?
by alexander bustamante 24 Oct '06

24 Oct '06

Is it a "good" card to use with VDR? It's a USB via PCI-device, is this a good or a bad thing, does it matter at all? Thanks!

1 0

Can xineliboutput and dxr3 coexist?
by Glyn Edwards 23 Oct '06

23 Oct '06

Hi, I've got VDR (1.4.3) running on a machine by my TV and have just been playing with the xineliboutput plugin to stream vdr over the network. Everything works well on its own but I'd like to be able to have someone watching TV on one channel via the dxr3 and someone else watching a recording on the network via xineliboutput. Is this possible? Currently, if I install the xineliboutput plugin then there is no longer any output to the TV via the dxr3. Thanks Glyn

4 8

Re: [vdr] FF card A/V sync suggestion
by Guy Roussin 23 Oct '06

23 Oct '06

>> if i make this, the file play fine (vdr ffcard) : >> >> mv 001.vdr _001.vdr >> mv index.vdr _index.vdr >> mplayer -vo mpegpes:001.vdr -ao mpegpes 001.vdr >> genindex >> >> But now the file 001.vdr is 100Mb ! > > Am I doing something wrong? I dont seem to have any sound.. also if you move > 001.vdr to _001.vdr, then the command below will not be able to find the file. > :) Sorry for the typo : mplayer -vo mpegpes:001.vdr -ao mpegpes _001.vdr -- Guy Roussin ___________________________________ http://www.teledetection.fr

3 3

Re: [vdr] FF card A/V sync suggestion
by Guy Roussin 23 Oct '06

23 Oct '06

Tero Siironen <izero79(a)gmail.com> wrote : > Here is a 3 minute clip from the episode of Lost I told earlier. > http://kotisivu.suomi.net/izero/lost.tar > > 80MB file and played ok at least with VLC v 0.8.5. and MPlayer on OS X > if i make this, the file play fine (vdr ffcard) : mv 001.vdr _001.vdr mv index.vdr _index.vdr mplayer -vo mpegpes:001.vdr -ao mpegpes 001.vdr genindex But now the file 001.vdr is 100Mb ! -- Guy Roussin ___________________________________ http://www.teledetection.fr

2 1

VDR deletes directories
by Matthias Fechner 22 Oct '06

22 Oct '06

Hi, I have the problem that VDR deletes directories in my /video0 or /video1 ... which not belongs to VDR. I use vdrconvert to convert my VDR recordings to DVDs so I have a directory /video1/filme which VDR deletes and vdrconvert breaks. Is it possible to deny the delete of this directory? (vdr is running as root here) Best regards, Matthias -- "Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to produce bigger and better idiots. So far, the universe is winning." -- Rich Cook

8 14

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr