vdr

vdr@linuxtv.org

6731 discussions

VDR and system time setting
by Bernd Juraschek 20 Oct '06

20 Oct '06

Hello, I've configured VDR to set the system time. But it's not possible to change the channel to use. I can switch the setting to another channel and vdr is saving setup.conf. But if I reenter the settings, I see the old channel again. The channel displayed on OSD is 126, but setup.conf contains "TimeTransponder = 113". What's going on? Greetings, Bernd

2 1

VDR (xine?) playback
by martin 20 Oct '06

20 Oct '06

If your picture gets blue, then you use overlay - as the "blue" is the colour that is used to replace with the TV pic! Try my config, that you have to place into your ~/.xine dir. I am using the nvidia legacy driver, as I had problems with the newer driver. It did not accept the ModeLines! >From dpkg -l ii nvidia-glx-legacy 1.0.7174+2.6.15.11-5 NVIDIA binary XFree86 4.x/X.Org 'legacy' dri ii nvidia-kernel-common 20051028+1 NVIDIA binary kernel module common files ii nvidia-settings 1.0-3ubuntu7 Tool of configuring the NVIDIA graphics driv xorg.conf attached .. you need to set the settings via nvidia-settings! But see my show-vdr script which is executed at login. You also see the iecset and amixer settings that I need in order to get Dolby Digital pass though to spdif! And from your xorg.log -> the modeline was not accepted .. see my xorg.log (**) NVIDIA(0): Validated modes for display device TV-0: (**) NVIDIA(0): Mode "720x576@50i": 14.1 MHz, 15.6 kHz, 50.0 Hz (I) (**) NVIDIA(0): Mode "720x576PAL": 27.5 MHz, 31.2 kHz, 50.0 Hz (II) NVIDIA(0): Virtual screen size determined to be 720 x 576 Regards, Martin -----Ursprüngliche Nachricht----- Von: Boguslaw Juza [mailto:bogdan@uci.agh.edu.pl] Gesendet: Dienstag, 17. Oktober 2006 08:56 An: martin Betreff: Re: AW: [vdr] VDR (xine?) playback On Tue, 17 Oct 2006, martin wrote: > are you sure that xine actually utilizes xxmc? 10% for your system seems a > bit high CPU load. I've a Pentium M running at 1.2GHz with 3% CPU load. It's > really tricky to find the right settings in xine, where to set a checkmark > without breaking the xxmc driver. Well, Im sure. There is a characteristic symptom: when I'm setting new channel, the picture is all blue for short time before normal tv video starts. Xine debug tells, that using xxmc. And xine takes 2-15% CPU. Or even more, when OSD appears. > * (I was searching for the reference, but it's too late for today). As far > as I remember correctly, Hardware mpeg2 can only do interlaced or bob > deinterlaced streams. So if you want hardware support, deinterlacing support > is very limited. Unfortunatly... > * I am wondering, why you want to deinterlace - since a TV set is perfectly > accepting interlaced PAL! It's its native format. > * Have you checked your X config? You will need a handcrafted modeline to > have 50Hz refresh rate. Maybe there is a problem. Lets check: Im using nVidia Xorg driver ver.8774 I have set VertRefresh to 100, or 50, or even 1000 - no diference, every time X starts and (I think) one silently ingored this settings. The same with ModeLine. Could You send me your xorg.conf ? >From log: (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16 (==) NVIDIA(0): RGB weight 565 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TVStandard" "PAL-B" (**) NVIDIA(0): Option "TVOutFormat" "SVIDEO" (**) NVIDIA(0): Option "TVOverScan" "0.85" (**) NVIDIA(0): Option "TripleBuffer" "1" (**) NVIDIA(0): Enabling RENDER acceleration (**) NVIDIA(0): Forcing SVIDEO output (**) NVIDIA(0): TV Standard string: "PAL-B" (II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:1:5:0 (--) NVIDIA(0): VideoRAM: 131072 kBytes (--) NVIDIA(0): VideoBIOS: 04.34.20.54.18 (II) NVIDIA(0): Detected AGP rate: 8X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:5:0: (--) NVIDIA(0): NVIDIA TV Encoder (TV-0) (--) NVIDIA(0): NVIDIA TV Encoder (TV-0): 350.0 MHz maximum pixel clock (--) NVIDIA(0): TV encoder: NVIDIA (II) NVIDIA(0): Assigned Display Device: TV-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "800x600" (II) NVIDIA(0): Virtual screen size determined to be 800 x 600 > * You also need to check your settings with nvidia-settings for "*Sync" > entries. 0/XVideoTextureSyncToVBlank=1 0/XVideoBlitterSyncToVBlank=1 0/XVideoSyncToDisplay=256 It is realy used? Boguslaw Juza

1 0

Cheapest FF card?
by Girish Venkatachalam 19 Oct '06

19 Oct '06

Hello vdr, Greetings! I am looking for a somewhat affordable(whatever that means :-) full featured DVB TV card since that is the only thing supported by vdr apparently. I hear they are above the 150$ range, it is very expensive for me. I want to be able to decode pay channels as well but apparently I can do that using a card reader that is not build into the TV card itself. Many thanks! regards, Girish -- Duty for duty's sake without hope for reward or fear of punishment

5 10

VDR and Samba charset conversion
by Rene Bartsch 19 Oct '06

19 Oct '06

Hi, I'm struggling with charset conversion using Samba and VDR. The Samba server is version 3.0.22 (on Gentoo). Locales are: GDM_LANG=en_US.utf8 LANG=en_US.utf8 LANGUAGE=en_US.utf8 LC_ADDRESS=en_US.utf8 LC_ALL=en_US.utf8 LC_COLLATE=en_US.utf8 LC_CTYPE=en_US.utf8 LC_IDENTIFICATION=en_US.utf8 LC_MEASUREMENT=en_US.utf8 LC_MESSAGES=en_US.utf8 LC_MONETARY=en_US.utf8 LC_NAME=en_US.utf8 LC_NUMERIC=en_US.utf8 LC_PAPER=en_US.utf8 LC_TELEPHONE=en_US.utf8 LC_TIME=en_US.utf8 In smb.conf I've added dos charset = UTF8 unix charset = UTF8 display charset = UTF8 The Samba server should work with all NT4/XP-based based Windoze clients, MacOS 10.x- and Linux clients using de_DE.utf8 charset. The Problem is the VDR-Box. It's the Minidvblinux distribution with samba-client-2.2.3a-1. As there are no environment variables for charset I assume it uses standard POSIX/C. I've tried different iocharset and codepage options for smbmount on the MLD-VDR box, but still get weird chars. Thanx for any hint how to configure Samba/smbmount Renne

1 0

RE: [vdr] Problem with audio sync in playback
by jori.hamalainen＠teliasonera.com 19 Oct '06

19 Oct '06

>> I tested with VDR 1.4.3 and test_av app included in 22623 test >> firmware package, with firmwares 261a, 261f, 2622 and that test version 22623. >> Everytime playback stuttered and lost a/v sync after scene change situation. >> >> So I think this is more like dvb firmware/driver problem than VDR problem. >> However this is very annoying. >I agree, this is not VDR problem but firmware. However, I don't know which mailing > list is better to report this problem: vdr or dvb thus I've sent this here. My gut feeling is that these problems appeared around when AC3 bitstream out came into DVB firmware, and I think that was done by Werner Fink. I think he has kept knowledge by himself, so maybe he should be able fix the situation? http://www.linuxtv.org/download/firmware/ 2004-12-26 dvb-ttpci-01.fw-261d Changes by Werner Fink: - Implement AC3/DTS replay capability - Proper handling of OSD bitmap loading with timeouts - Set interpolated option of video decoder to reduce block noise on hard picture changes - FlushTS command fixes 2003-10-13 dvb-ttpci-01.fw-261b fixed distortions when switching channel while recording .. 2003-07-09 dvb-ttpci-01.fw-261a (this is the first new type of firmware(is it?), and was already tested by you) But this is a feeling, not a fact. So maybe older default firmware for old type of driver should be tested, I mean not dvb-ttpci* type of file, I mean Root & Dpram -files.

1 0

vdradmin-am and autotimer
by CR 19 Oct '06

19 Oct '06

Hi, I'm trying to use the autotimer so I can enter in my favorite shows and have them automatically recorded. (I think this is functionality VDR itself needs to have but that is another discussion). If I use the search box on the bottom, left, vdradmin-am 3.4.7b lists the show I want. If I click AutoTimer, type in the same search pattern (i.e. Star Trek Next Generation), enable Title, Subtitle, Description and then hit "Test", nothing is listed. What am I missing here? Is there a plug-in needed on vdr to make this work? Can we try to bring together some documentation for vdradmin-am? I searched high and low and didn't find anything. Thanks, CR.

3 2

[PATCH] Ogginfo utf8 conversion for mp3 plugin
by Thomas Günther 18 Oct '06

18 Oct '06

Hi! Here is a patch that converts ogginfos from utf8 to the setup charset. It is tested with mp3 plugin 0.9.15 and mp3ng plugin 0.0.9a. The cache file /video/id3info.cache (or /video/id3info.dat for mp3ng) has to be removed. http://toms-cafe.de/vdr/download/mp3-0.9.15-ogg-conv-utf8.diff Tom

1 0

Harman Kardon AVR 435 working with spdif of full featured cards ?
by Dieter Bloms 18 Oct '06

18 Oct '06

Hi, I plan to buy the harman kardon avr 435 receiver and want to connect the pin4 from jumper 2 of my full featured card to it. Does anybody know if this receiver works with the rev 1.3 card ? I don't mean the voltage, but the non audio bit problem. Thank you for an answer ! -- Gruß Dieter -- I do not get viruses because I do not use MS software. If you use Outlook then please do not put my email address in your address-book so that WHEN you get a virus it won't use my address in the From field.

2 1

mediamvp and subtitles
by Jouni Karvo 18 Oct '06

18 Oct '06

hi, I was wondering of moving the (low) noise VDR machine away from the living room. For that, I would need something new, and was considering Hauppauge MediaMVP. So a couple of questions: - does MediaMVP and work with dvb-subtitles plugin? - which plugin to use: mediamvp plugin, or vompserver plugin? - do these plugins show VDR:s OSD (so that e.g. tvonscreen or osdteletext would work) ? yours, Jouni

4 4

VDR deletes timers?
by Lars Fredriksson 17 Oct '06

17 Oct '06

Hi! I'm having a problem, I think that it came up whan i deleted all my config files and started from the beginning. I have one "server" with the DVB-cards and one "client" without any DVB-cards. Whan I add a timer at the server using vdradmin (3.4.7) och SVDRP it looks like this in /var/log/messages: Oct 17 22:52:46 digestive vdr: [9229] timer 1 (4 2058-2205 'House') added Oct 17 22:52:46 digestive vdr: [9229] closing SVDRP connection Oct 17 22:52:47 digestive vdr: [9229] timer 1 (4 2058-2205 'House') set to event Tue 17.10.2006 21:00-21:55 'House' Oct 17 22:53:02 digestive vdr: [9229] deleting timer 1 (4 2058-2205 'House') The timer gets deleted almost directly after it's added!? I have stopped the vdradmin process so it is not vdradmin that deletes the timer. I can record on the client without any problems, but when I have a record active on it I can't watch another channel ... I'm running VDR 1.4.3-2, streamdev-cvs, ttxtsubs Thanks for any hint! Best regards, Lars Fredriksson

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr