vdr

vdr@linuxtv.org

6731 discussions

Re: Few basic VDR questions
by CR 07 Feb '06

07 Feb '06

Hi all, Thank you to everyone who responded to my questions. I sincerely appreciate it. Torgeir Veimo wrote: > > With VDR, can I utilize the TV-out built into my video card for > > Get the softdevice plugin; http://softdevice.berlios.de. It uses your > gfx card for output. well. >From the readme I see that softdevice supports both Xv and DirectFB. Does one work better than the other, or is that purely dependant on the video chipset? (my chipset is S3 Savage IX, 8 MByte for those wondering). Thanks, R.

1 0

Lost & regained lock
by Jan Ekholm 06 Feb '06

06 Feb '06

Hi, Since updating to 1.3.41 I see a lot of this in syslog: 03:50:42 hex vdr: [26491] frontend 1 lost lock on channel 6, tp 154 03:50:42 hex vdr: [26491] frontend 1 regained lock on channel 6, tp 154 03:51:03 hex vdr: [26491] frontend 1 lost lock on channel 1, tp 162 03:51:03 hex vdr: [26491] frontend 1 regained lock on channel 1, tp 162 03:51:24 hex vdr: [26491] frontend 1 lost lock on channel 11, tp 378 03:51:24 hex vdr: [26491] frontend 1 regained lock on channel 11, tp 378 03:51:45 hex vdr: [26491] frontend 1 lost lock on channel 32, tp 426 Actually, the whole logfile is full of these messages. I haven't seen them before so I assume it's some kind of error/warning condition that older versions didn't notice? The kernel is a 2.6.10, maybe the drivers there aren't the best and I should try upgrading the kernel? Regards, Jan Ekholm -- 'Educational' refers to the process, not the object. Although, come to think of it, some of my teachers could easily have been replaced by a cheeseburger. -- Terry Pratchett, alt.fan.pratchett

1 1

[ANNOUNCE] VDR developer version 1.3.42
by Klaus Schmidinger 06 Feb '06

06 Feb '06

VDR developer version 1.3.42 is now available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.3.42.tar.bz2 A 'diff' against the previous version is available at ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.3.41-42.diff The changes since version 1.3.41: - Removed leftover 'needsBufferReserve' variable from cTransfer (thanks to Marco Schlüßler). - Fixed setting "No title" for broken event data (reported by Ronny Kornexl). - Fixed channel up/down switching on single card systems (reported by Stefan Huelswitt). - Fixed handling "pending" timers that blocked others that actually could record (reported by Thomas Koch). - Speeded up cVideoRepacker (thanks to Reinhard Nissl). - Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier process the audio data (thanks to Marco Schlüßler). - Added Czech language texts (thanks to Bárta Vladimír). Plugin authors may want to add the new entries to their I18N texts and contact the translators to have their texts translated. Note that there are now 21 different OSD languages, so please make sure you have 21 versions for each of your texts. - Updated the Polish OSD texts (thanks to Jaroslaw Swierczynski). - Fixed auto advance in string entry fields when pressing Up/Down in insert mode (reported by Udo Richter). - Fixed handling the "Setup/OSD/Menu button closes" option when set to 'yes' in case a replay is active (thanks to Udo Richter). - Improved cUnbufferedFile; USE_FADVISE is now defined in tools.c by default, so if you don't want to use "fadvise" you need to comment out that line (thanks to Artur Skawina). - Fixed a missing ',' in the Swedish OSD texts (thanks to Arthur Konovalov). - cDevice::Transferring() can now be used to determine whether the (primary) device is currently playing in Transfer Mode (based on a suggestion by Reinhard Nissl). - The 'runvdr' script no longer uses the $VDRUSR environment variable to set the user id under which 'vdr' shall run. Just add the '-u username' option when you call 'runvdr'. - Fixed multiple entries of the same subdirectory in the "Recordings" menu (reported by Christian Jacobsen). - Enabled generating a core dump if VDR is run with a different user id (thanks to Ville Skyttä). - Fixed handling the "Blue" key in the "Schedule" menu for the current channel (thanks to Rolf Ahrenberg). - Renamed the Makefile target 'plugins-clean' to 'clean-plugins' (suggested by Sebastian Frei). - Made all font and image data 'const' (thanks to Darren Salt). - Fixed scrolling with Up/Down in case there are non-selectable items at the beginning or end of the menu (reported by Helmut Auer). - Added cSkin::GetTextAreaWidth() and cSkin::GetTextAreaFont(), so that a plugin that wants to do special text formatting can do so (thanks to Alexander Rieger). Have fun! Klaus

6 5

streamdev-server streamdev-client
by João Mamede 06 Feb '06

06 Feb '06

I'm using streamdev-server in one machine and streamdev-client(it used to work) now epg syncronizes properly without any kind of problem and I see the actual epg..but I can't see anything :( ( the client changes the channel in server because if stops outputing image in server if it's in different transponder) after the epg(I checked the network) sync the is no more transfer in the network devices :( why? Best Regards João Mamede

1 0

[PATCH] vdr-xine 0.7.6: vdr 1.3.42 compatibility
by Darren Salt 06 Feb '06

06 Feb '06

4 3

Announce vdr-eggtimer-0.9.0
by Peter Juszack 06 Feb '06

06 Feb '06

Hi, a new version of the eggtimer plugin is available: http://194.95.44.38/~pjuszack/digicam/download/vdr-eggtimer-0.9.0.tgz New: - input of date/time - actions OSD message/ switch channel/ execute command It can now be used as a small CRON which can be set up via remote control. Regards Peter

1 0

burn plugins segmentation fault
by João Mamede 06 Feb '06

06 Feb '06

Hi I was trying to use burn plugin vdr-1.3.38 it compiles ok(I used a set of plugins for 1.3.38 package) but when I do.."burn" after selecting the recordings and all my vdr seg faults without any other message. What can I do?

1 0

Few basic VDR questions
by CR 06 Feb '06

06 Feb '06

Hi everyone, I am new to VDR, but I have tried my best to do research before asking these questions. 1. Does VDR work with any DVB card supported by the Linux-DVB kernel drivers? 2. My DVB device will not have any TV-out hardware. With VDR, can I utilize the TV-out built into my video card for playback, OSD, etc or do I need a third-party front-end such as "kvdr" ? My video chipset's TV-out is supported by XOrg and I do have Xv support. 3. Is there anyone who has used the vdr add-on "noad" (http://www.freepgs.com/noad/README.en.html) succesfully in the US/North America? How well does it work? Thanks in advance. R.

4 3

[PATCH] vdr-softdevice-0.2.1: vdr 1.3.42 compatibility
by Luis Palacios 06 Feb '06

06 Feb '06

Thanks Darren for your patch for vdr-xine few hours ago. As I'm still using softdevice and had the same issue I've adapted yours to it. It adds support for this new feature added by Klaus in 1.3.42: [..] - Added an 'Id' parameter to cDevice::PlayAudio() to allow plugins to easier process the audio data (thanks to Marco Schlüßler). [..] luis

2 1

[PATCH] timer-info patch 0.3
by Thomas Günther 06 Feb '06

06 Feb '06

Hi! Here is a new version of the timer-info patch (tested with VDR-1.3.42): http://toms-cafe.de/vdr/download/vdr-timer-info-0.3-1.3.38+.diff This patch shows info in the timer menu, if it is possible to record a scheduled event. Changes since version 0.2: - Fixed refresh of timer menu in cMenuTimers::OnOff - Fixed check of repeating timers - Syslog debug messages can be enabled with Define DEBUG_TIMER_INFO Tom

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr