vdr June 2005

vdr@linuxtv.org

132 participants
147 discussions

Perfect quality with xine and xvmc !!!
by Gregoire Favre 23 Jun '05

23 Jun '05

Hello, just found an option for xine : video.device.xvmc_bob_deinterlacing:1 http://cvs.sourceforge.net/viewcvs.py/xine/xine-lib/doc/README_xxmc.html?re… And that's really good :-) -- Gr\'egoire Favre

3 2

Re: [linux-dvb] Vanilla 2.6.12 and Nova-T (new) problems
by Richard Wall 23 Jun '05

23 Jun '05

Hanno Mueller wrote: > Richard Wall schrieb: > >>...but VDR developer version 1.3.27 is working fine for me so far. > Thanks. Forgive me if this is the wrong place to ask this, but if this > rellay is just a vdr issue, any idea how I can debug this? Right now, I > don't know if it's vdr or my card that is causing the problem. The place to ask is... http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > betamax:~# grep "restarting" /var/log/syslog | tail -30 > Jun 23 11:27:17 localhost runvdr: restarting VDR Well, don't use runvdr. Run it directly as vdr and see what happens. Runvdr is only supposed to be used once you've got everything working and is supposed to handle restarting after a vdr crash. I never found it very good and instead use runit (http://smarden.org/runit/) which is much more reliable. But don't even worry about that until you've got it running manually. I started writing a guide to setting up vdr on Debian SID, but unfortunately it's only really a list of (too specific) commands. Will try and finish off soon. http://linuxtv.org/vdrwiki/index.php/DEBIAN_Install_VDR_with_Nova-T%2890002… -RichardW.

1 0

Which patch do I need for 1.3.26 and xine ?
by Gregoire Favre 22 Jun '05

22 Jun '05

Hello, I am on the point of compiling 1.3.26. I really like to have the lenght of the reccording, unfortunately I don't know how to take it from enAIO so I patch the whole wih http://users.tkk.fi/~rahrenbe/vdr/vdr-1.3.26-enAIO-2.3.diff.gz even if it's the only thing I want from this patch. What are still needed in order to use xine-plugin with this release ? I know I should patch with one of the osdbase fix (not sure of which one I should take...) and maybe some others from http://home.vrweb.de/~rnissl/ ? Thank you very much, -- Gr\'egoire Favre

2 2

EPG scan on single card system
by Bernhard Stegmaier 22 Jun '05

22 Jun '05

Hi! I messed around the whole evening trying to get EPG scan to work on my vdr. I have a freshly installed vdr 1.3.27, single FF-card... no patches, just the plugins: femon, graphlcd, epgsearch Triggering EPG scan with "svdrpsend.pl SCAN" seems fine (writes something like "EPG scan triggered"), but nothing happens. Triggering via the red button in the EPG menu does nothing either. I have something in mind that I read that it didn't work on previous versions and that Klaus said, that he has changed (or will change) something to make it work again... has this been changed yet? Bernhard

5 10

DVB-T and channels.conf
by Rainer Zocholl 22 Jun '05

22 Jun '05

Hello recently i already reported about a wiered problem VDR generates 2 channels.conf entries for every DVB-T channel. Example: VOX;RTL World:666000:I0C23D0M16B8T8G8Y0:T:27500:545:546=deu:551:0:16418:8468:8706:0 VOX;RTL World:666000:I0C23D0M16B8T8G8Y0:T:27500:0:0:0:0:16418:8468:2818:0 I would not care about it, but i get the EPG infos only on the second entry. But there is no video. Why does EGP get not infos at the first entry, which looks much less broken that the second? Any usefull step to narrow the problem? vdr 1.3.25 (LNBshared) lspci says: 0000:00:09.0 0480: 1131:7146 (rev 01) TT FF DVB-S 0000:00:0a.0 0400: 109e:036e (rev 11) AverMedia DVB-T 771 0000:00:0a.1 0480: 109e:0878 (rev 11) 0000:00:0b.0 0480: 1131:7146 (rev 01) TT FF DVB-S 0000:00:0c.0 - 0000:00:0d.0 0480: 1131:7146 (rev 01) TT FF DVB-S 0000:00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture(rev 11) 0000:00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 0000:00:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Rainer---<=====> Vertraulich // // <=====>--------------ocholl, Kiel, Germany ------------

4 8

vdradmin
by mike lewis 21 Jun '05

21 Jun '05

Hi, I'm trying to test vdradmin 0.97 am3.2. However, I can't get config to run. Can someone help? ---- freevo vdradmin-0.97-am3.2 # ./vdradmind.pl --config Can't locate Locale/gettext.pm in @INC (@INC contains: ./lib/ /usr/share/vdradmin/lib /etc/perl /usr/lib/perl5/site_perl/5.8.3/i686-linux /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.3/i686-linux /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.3/i686-linux /usr/lib/perl5/5.8.3 /usr/local/lib/site_perl .) at ./vdradmind.pl line 51. BEGIN failed--compilation aborted at ./vdradmind.pl line 51. ---- Mick

3 2

mp3/mplayer plugin with xineplayer
by Simon Baxter 21 Jun '05

21 Jun '05

I'm using the mp3/mplayer plugin to play .avi clips though VDR, with 'mplayer.sh' modified to call xineplayer (as I'm already using vdr-xine as a soft device) What I want to be able to do is PAUSE, FF and RW the clips - and even maybe MARK (so when I play the clip again, it starts where I left off). How can I do this? At the moment, all I can do is start playing and stop playing - no other controls at all. I understand if I use the plugin with MPLAYER (in slave mode) I could do this, but I want to do it with XINEPLAYER. any ideas?

3 3

Playing .avi .mpg files from VDR-Xine
by Simon Baxter 20 Jun '05

20 Jun '05

Hi group. I have a collection of media I'd like to play from the VDR interface under Xine. Does anyone know of a plugin that will let VDR browse playlists, play/pause/ff/rw through .avi files? I know I can use Xine for this, but I want to control it all from the remote and the key mappings don't share between VDR and Xine well! Thanks Simon

5 6

A difference b/n vdr-1.3.26-enAIO-2.3.diff and vdr-1.3.27-enAIO-2.3.diff
by C.Y.M 20 Jun '05

20 Jun '05

Starting with vdr-1.3.26, the recording date in VDR uses DD-MM-YY, instead of just DD-MM. When I compare the latest enAIO patch for vdr-1.3.27 with the previous patch for vdr-1.3.26, it looks like the array has gone back to the original size of 6. Is this correct? +--- vdr-1.3.26/recording.c 2005-06-05 07:11:45.000000000 -0700 ++++ vdr-1.3.27/recording.c 2005-06-19 08:06:39.000000000 -0700 @@ -52,6 +52,7 @@ #endif #define INFOFILESUFFIX "/info.vdr" @@ -911,7 +911,7 @@ + else { + struct tIndex { int offset; uchar type; uchar number; short reserved; }; + tIndex *index; -+ char RecLength[21], RecDate[6], RecTime[6], RecDelimiter[2]; ++ char RecLength[21], RecDate[9], RecTime[6], RecDelimiter[2]; + if (Setup.ShowRecLength) { + char *filename = NULL; + int last = -1; Best Regards, C.

3 3

can not comile burn plugin with vdr-1.3.27
by Halim Sahin 20 Jun '05

20 Jun '05

Hi, Yesterday I tried to update my vdr to the last Developer version 1.3.27. The burn plugin doesn't compile: jobs.c: In constructor `cBurnRecording::cBurnRecording(cRecording*, long int)': jobs.c:26: error: `Summary' undeclared (first use this function) I think this is after vdr-1.3.25 changes in recording.c. Does someone work on this. Thanks Halim .

2 3

← Newer
1
2
3
4
5
6
7
8
9
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr June 2005