vdr October 2008

vdr@linuxtv.org

81 participants
84 discussions

[ANNOUNCE] pvr350-2008-09-07
by Martin Dauskardt 04 Oct '08

04 Oct '08

Today I announced this version in the german vdrportal forum. The last time I announced a new pvr350 plugin-version here in the ML was June 2007. So it is time to write here again to keep the non-german-speaking users informed. The pvr350-plugin implements an output device for the PVR350 TV out, using the hardware mpeg2 decoder. http://drseltsam.device.name/vdr/pvr/src/pvr350/vdr-pvr350-2008-09-07.tgz Look into the HISTORY for the many changes since June 2007. Attention: The plugin does not work properly with vdr 1.7.1: vdr now simply strips the TS headers and sends the payload to the usual PlayVideo() and PlayAudio() functions. The PES packets have no longer a size of 2kB, and the PES audio ID is always 0. The pvr350 hardware decoder and/or the ivtv driver cannot handle this. We would need a lot of additional code - time will see ... Note: For watching analogue TV from the tuner of the PVR350 you need a second plugin as input device. This is pvrinput, and as there is also a new version, I will announce it in a separate mail.

1 0

segfault during of switchning between hdtv channels
by Goga777 03 Oct '08

03 Oct '08

Hi with the latests xine-lib-1.2/ffmpeg/xineliboutput I very often have the h264-segfault during of switching between ORF (720p - channel with progressive video) and Astra HD, Anixe HD (1080i channels). Has somebody the same problem ? ct 3 19:37:10 localhost vdr: [5715] cVideoRepacker: operating in H.264 mode Oct 3 19:37:10 localhost vdr: [5715] SetBrokenLink: no GOP header found in video packet Oct 3 19:37:10 localhost vdr: [5715] [xine..put] cXinelibDevice::PlayVideo: Detected H.264 video Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264: Found NAL SPS at offset 6/2029 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: profile_idc 77 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: pic_width: 80 mbs Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: pic_height: 45 mbs Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: frame only flag: 1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: aspect_ratio_idc 1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] Detected video size 1280x720 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 scanner: Possible H.264 NAL AUD Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264: Found NAL SPS at offset 6/2029 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: profile_idc 77 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: pic_width: 80 mbs Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: pic_height: 45 mbs Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: frame only flag: 1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: aspect_ratio_idc 1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: -> aspect ratio 1 / 1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: -> video size 1280x720, aspect 1:1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] post_frame_end: video width 1280, height 720, pixel aspect 1:1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264: post pts 8439132600 [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one Ошибка сегментирования

2 2

[PATCH] S2API for vdr-1.7.0 (quick hack for DVB-S/DVB-S2)
by Niels Wagenaar 03 Oct '08

03 Oct '08

Hello All, Yesterday evening I finally got S2API working with those troublesome DVB-S2 transponders using QPSK modulation. Attached is a patch which includes the DVB-S/DVB-S2 S2API patch and the H264 patch for VDR 1.7.0. Apply this patch to a clean VDR 1.7.0 sourcetree. This is my first time I created a patch, so please don't shoot me for it :) I use patch -p1, and it applied cleanly, *I think*. I've been using this patch since yesterdaynight, and everything seems very stable on a Hauppauge WinTV-NOVA-HD-S2 card. The patch itself is based upon Igor M. Liplianin's S2API patch. Many thanks to Igor and Darron Broad for helping me with this one. I hope to start with DVB-C and a working DVB-T implementation tonight. Any feedback on this patch is highly appreciated. Regards, Niels Wagenaar

5 15

(no subject)
by Goga777 03 Oct '08

03 Oct '08

ct 3 19:37:10 localhost vdr: [5715] cVideoRepacker: operating in H.264 mode Oct 3 19:37:10 localhost vdr: [5715] SetBrokenLink: no GOP header found in video packet Oct 3 19:37:10 localhost vdr: [5715] [xine..put] cXinelibDevice::PlayVideo: Detected H.264 video Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264: Found NAL SPS at offset 6/2029 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: profile_idc 77 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: pic_width: 80 mbs Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: pic_height: 45 mbs Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: frame only flag: 1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: aspect_ratio_idc 1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: -> aspect ratio 1 / 1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] H.264 SPS: -> video size 1280x720, aspect 1:1 Oct 3 19:37:10 localhost vdr: [5715] [xine..put] Detected video size 1280x720 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 scanner: Possible H.264 NAL AUD Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264: Found NAL SPS at offset 6/2029 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: profile_idc 77 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: pic_width: 80 mbs Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: pic_height: 45 mbs Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: frame only flag: 1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: aspect_ratio_idc 1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: -> aspect ratio 1 / 1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264 SPS: -> video size 1280x720, aspect 1:1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] post_frame_end: video width 1280, height 720, pixel aspect 1:1 Oct 3 19:37:10 localhost vdr: [5699] [input_vdr] H.264: post pts 8439132600 [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one [h264 @ 0x89db3a0]number of reference frames exceeds max (probably corrupt input), discarding one Ошибка сегментирования goga@goga:/usr/src/vdr170$

1 0

Re: [vdr] [PATCH] S2API for vdr-1.7.0 (quick hack for DVB-S/DVB-S2)
by Niels Wagenaar 02 Oct '08

02 Oct '08

Op Do, 2 oktober, 2008 16:35, schreef Gregoire Favre: > -- SNIP -- > I can watch DVB-S channels, including H.264 ones. > > For some unknown reason I can't seems to be able to watch Arte HD for > example when I start VDR with all my cards. > > If I start VDR with -D1 (my only DVB-S2 card) it works well, I guess it > miss a check like in the previous patch ;-) > I think why this is the case. The original patch by Igor (and then by me) disabled some items. More importantly, the code to switch to other cards/frontends. Since I'm going to work on DVB-T and DVB-C, I hope to implent this as well. I can test this a bit since I use DVB-S/DVB-S2 and DVB-T on my VDR configuration. > Great work :-) Yeah, Gimli made some nice patches! Since I had to work, I couldn't do this myself. Next patch from will will be for unpatched and patched VDR 1.7.0 with h264 patch. So, future patches will not have the speedup patches implented. Regards, Niels Wagenaar

2 1

Re: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg?
by Niels Wagenaar 02 Oct '08

02 Oct '08

-----Original message----- From: Stefan Ellenberger <stefan_ell(a)hotmail.com> Sent: Thu 02-10-2008 01:53 To: vdr(a)linuxtv.org; Subject: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg? > > Thanks Niels, indeed this helped me as well. > Your welcome! > Now I'm getting a HUGE amount of "undefined reference to av_log" > > It starts browsing the ffmpeg source tree (where I built ffmpeg) for libav c > files > > here's the one that makes it quit: > > -- SNIP -- > > You happen to know a way around this as well? Since you are using XUbuntu like > I do you might > have experienced the same problem. > Nope. Besides that thing with the -ldts_pic and a additional patch, I didn't need to anything else. > I don't hope it is getting any worse than that... > It shouldn't :) > 1. how many fixes in the code have been necessary until you (Niels) could run a > save compile? Only two in my case. But on those fixes is a patch so that xine-lib 1.2 SVN can build with the latest ffmpeg SVN releases. > 2. Could anyone point out what kind of developer libraries you installed in > order to compile xine-lib savely? > This is what I use: - FFMPEG SVN: cd /usr/local/src apt-get install build-essential apt-get install mercurial cvs subversion libncurses-dev apt-get install autoconf libtool automake pkg-config gettext apt-get install liba52-0.7.4-dev liblame-dev libvorbis-dev zlib1g-dev libpng12-dev libx11-dev libxv-dev libasound2-dev apt-get build-dep ffmpeg svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg cd ffmpeg/ ./configure --prefix=/usr --enable-shared --enable-gpl --enable-postproc --enable-liba52 --enable-libmp3lame --enable-libvorbis --enable-pthreads --enable-swscale make make install ldconfig –v - Xine-lib 1.2 HG: cd /usr/local/src apt-get install libcdio-dev libvcdinfo-dev hg clone http://hg.debian.org/hg/xine-lib/xine-lib-1.2 wget http://www8.mplayerhq.hu/MPlayer/releases/codecs/essential-20071007.tar.bz2 tar xivf essential-20071007.tar.bz2 mv essential-20071007 /usr/local/lib/win32 ln -s /usr/local/lib/win32 /usr/local/lib/codecs wget http://shalafi.xs4all.nl/vdr/xine-lib-1_2-ffmpeg.patch cd xine-lib-1.2 patch –p1 < ../xine-lib-1_2-ffmpeg.patch ./autogen.sh --prefix=/usr --with-external-ffmpeg --disable-dxr3 --enable-w32dll --with-w32-path=/usr/local/lib/win32 make make install ldconfig -v - Xine-UI: cd /usr/local/src apt-get install libxt-dev wget http://home.vrweb.de/~rnissl/xine-ui-cvs-20080310200000.tar.bz2 tar xivf xine-ui-cvs-20080310200000.tar.bz2 cd xine-ui ./autogen.sh --prefix=/usr --enable-vdr-keys make make install I think that the above information should get you the stuff installed. Regards, Niels Wagenaar

1 0

Can szap-s2 support TT3200?‏
by LinHai 02 Oct '08

02 Oct '08

Can szap-s2 support TT3200?‏ thank you! _________________________________________________________________ MSN 中文网，最新时尚生活资讯，白领聚集门户。 http://cn.msn.com

1 0

Converting HD recording
by Jelle De Loecker 01 Oct '08

01 Oct '08

Good evening all, I've got a bunch of old recordings made with VDR, like a 20 GB HD recording. I'd like to slim it down a bit, but don't really know where to start. How do you convert a show recorded on BBC HD to a "more" compact file? -- /Met vriendelijke groeten,/ *Jelle De Loecker* Kipdola Studios - Tomberg

1 0

Help building xine-lib-1.2 --with-external-ffmpeg‏
by Stefan Ellenberger 01 Oct '08

01 Oct '08

Thanks Niels, indeed this helped me as well. Now I'm getting a HUGE amount of "undefined reference to av_log" It starts browsing the ffmpeg source tree (where I built ffmpeg) for libav c files here's the one that makes it quit: /usr/local/lib/libpostproc.a(postprocess.o): In function `pp_get_mode_by_name_and_quality': /usr/src/ffmpeg/libpostproc/postprocess.c:758: undefined reference to `av_log' /usr/src/ffmpeg/libpostproc/postprocess.c:776: undefined reference to `av_log' /usr/src/ffmpeg/libpostproc/postprocess.c:787: undefined reference to `av_log' /usr/src/ffmpeg/libpostproc/postprocess.c:899: undefined reference to `av_log' /usr/src/ffmpeg/libpostproc/postprocess.c:901: undefined reference to `av_log' /usr/local/lib/libpostproc.a(postprocess.o):/usr/src/ffmpeg/libpostproc/postprocess.c:1067: more undefined references to `av_log' follow collect2: ld returned 1 exit status make[3]: *** [xineplug_decode_ff.la] Fehler 1 make[3]: Verlasse Verzeichnis '/usr/src/xine-lib-1.2/src/combined/ffmpeg' make[2]: *** [all-recursive] Fehler 1 make[2]: Verlasse Verzeichnis '/usr/src/xine-lib-1.2/src/combined' make[1]: *** [all-recursive] Fehler 1 make[1]: Verlasse Verzeichnis '/usr/src/xine-lib-1.2/src' make: *** [all-recursive] Fehler 1 You happen to know a way around this as well? Since you are using XUbuntu like I do you might have experienced the same problem. I don't hope it is getting any worse than that... 1. how many fixes in the code have been necessary until you (Niels) could run a save compile? 2. Could anyone point out what kind of developer libraries you installed in order to compile xine-lib savely? I just added the minimum - meaning apt build dependencies for ffmpeg and xine-lib - this also covers all of the libs listed in the sidux wiki (http://www.vdr-wiki.de/wiki/index.php/Sidux_VDR_DVB-S2#xine-lib) > I did. Just edit /usr/src/xine-lib-1.2/src/audio_dec/Makefile. Look for > -ldts_pic and add -lm after it. And now do a make again, it should now > Niels Wagenaar _________________________________________________________________ Werden Sie Mitglied der neuen Windows Live Messenger Familie! http://get.live.com

1 0

how to prevent xineplayer to go in slow-motion mode
by Newsy Paper 01 Oct '08

01 Oct '08

Hi! if I get short drop outs on a channel (NO Signal for example) the video goes on in normal speed, but after 3 or 4 further drop-outs the sound disappears and the video is in some kind of slow motion. I have to switch to another channel and back to get picture and sound normal. How to prevent xineplayer to switch to this slow motion mode? kind regards Newsy

2 1

← Newer
1
2
3
4
5
6
7
8
9
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

vdr October 2008